Physical Layer Interface Controller (PLIC)
MCF5272 ColdFire Integrated Microprocessor User’s Manual, Rev. 3
Freescale Semiconductor
13-39
delay 2. Programmable delay 2 generates a delayed frame sync with reference to FSC1. Similarly
CODECs 5 and 6 are connected to DFSC3 which is the output of programmable delay 3. Programmable
delay 3 generates a delayed frame sync also with reference to FSC1. The MC14LC5480 CODECs, when
in IDL mode, may be programmed using the FSR pin, to select whether the CODEC is receiving and
transmitting on the B1 or the B2 time slot. See the MC14LC5480 data sheet for further information.
Figure 13-38 shows the IDL bus timing relationship of the CODECs and MC145574 transceiver when in
standard IDL2 10-bit mode with a common frame sync.
Figure 13-38. Standard IDL2 10-Bit Mode
The S/T transceiver is connected to port 0, Din0/Dout0. The DCL and FSC generated from the S/T
transceiver are connected to DCL0, FSC0, and also feed port 1, DCL1, and FSC1 because port 1 is
synchronized to these S/T generated timing signals. The six CODECs are connected to Din1 and Dout1.
To provide six discrete 64-Kbps channels on the port 1 IDL interface, the delayed frame syncs are
programmed to synchronize the CODECs on non-overlapping time slots. CODEC 1 transmits and receives
in the B1 time slot. CODEC 2 transmits and receives in the B2 time slot, which starts 10 DCL cycles later,
and so on for the other CODECs. CODECs 3 and 4 are synchronized to DFSC2 which is generated 20 DCL
cycles after FSC1 by loading the programmable delay 2 register with 0x0014. The DFSC3 signal
synchronizes CODECs 5 and 6. DFSC3 is generated 40 DCL cycles after FSC1 by loading the
programmable delay 3 register with 0x0028.
Only the port 0 D-channel is used in this example; DREQ0 and DGNT0 are connected to the S/T
transceiver.
The GCI mode of operation is analogous. In GCI mode, port 0 can be configured to support the SCIT
channel.
B1
B2
MC145574
B4
B5
B6
CODEC 1
CODEC 2
CODEC 3
CODEC 4
DCL
FSC1
DFSC2
DFSC3
Din1/
Dout1
FSC0
B1
B2
D
Din0/
Dout0
CODEC5
CODEC6
B3
D