
Revision History
3
December 2003 Revised March 2005
SPRS231D
REVISION HISTORY
This data sheet revision history highlights the technical changes made to SPRS231B to generate SPRS231C. It
also highlights the technical changes made to SPRS231C to generate SPRS231D; these changes are marked by
“
[Revision D]
” in the Revision History table below.
Scope:
Deleted “Ball Grid Array Mechanical Data” section. Mechanical drawings of the 289-terminal ZDY pack-
age and the 289-terminal ZZG package will be appended to this document via an automated process.
Removed all references to: Compact Camera Port (CCP), Specially Optimized Screen Interface (SoSSI), VLYNQ,
Synchronous Serial Interconnect (SSI), Synchronous Serial Transmitter (SST), Synchronous Serial Receiver
(SSR), Generic Distribute DMA (GDD), and CompactFlash
Interface.
Made extensive updates to Timing Requirements tables and Switching Characteristics tables.
Changed operating temperature range from Ambient (T
A
) to Case (T
C
).
This document is now Production Data.
PAGE(S)
NO.
ADDITIONS/CHANGES/DELETIONS
Global:
removed all references to:
Compact Camera Port (CCP)
Specially Optimized Screen Interface (SoSSI)
Synchronous Serial Interconnect (SSI)
Synchronous Serial Transmitter (SST)
Synchronous Serial Receiver (SSR)
Generic Distribute DMA (GDD)
CompactFlash
Interface
VLYNQ
changed SDRAM.DQMU to SDRAM.DQMU
changed SDRAM.DQML to SDRAM.DQML
changed operating temperature range from Ambient (T
A
) to Case (T
C
)
moved Section 5.4 (Package Thermal Resistance Characteristics) to Section 7.1
removed Table 322. Specially Optimized Screen Interface (SoSSI) Registers
removed Section 3.5.4, CompactFlash Controller (MPU Only)
removed Section 3.6.2, Display Interface SoSSI
removed Section 3.6.4, Compact Camera Port (CCP)
removed Section 3.8.10, VLYNQ Interface
removed Section 5.9, CompactFlash Interface Timings
removed Section 5.15, VLYNQ Interface Timings
removed Section 5.17, Compact Serial Camera Port (CCP) Timings
removed Section 5.19, SoSSI Display Interface Timings
21
Section 1, OMAP5912 Features:
removed the “Specially Optimized Screen Interface (SoSSI)” feature
removed the “CompactFlash
Controller” feature
replaced “Compact Camera Port Interface For Parallel CMOS Sensors” feature with “Camera Interface for Parallel CMOS
Sensors” feature
removed the “VLYNQ
Interface (WLAN 802.11x)” feature
“Low-Power, High-Performance CMOS Technology” feature:
added “192-MHz Maximum Frequency” sub-feature
changed “1.6-V Core Voltage” sub-feature to “1.6
5%
V Core Voltage”
changed “16-Bit EMIFS to Access up to 256M Bytes of Flash (for Burst, Programmable NOR Flash)” to “16-Bit EMIFS
Supports up to 256M Bytes of External Memory (i.e., Async. ROM/RAM, NOR/NAND Flash, and Sync. Burst Flash)”
changed “16-Bit EMIFF to Access up to
128M
Bytes of SDRAM, Mobile SDRAM, or Mobile DDR” feature to
“16-Bit EMIFF to Access up to
64M
Bytes of SDRAM, Mobile SDRAM, or Mobile DDR”
deleted “Digital Phase-Locked Loop (DPLL) for MPU/DSP/TC Clocking Control” feature
added “Endian Conversion Unit” feature
CompactFlash is a trademark of CompactFlash Association.