參數資料
型號: DS3112N
廠商: DALLAS SEMICONDUCTOR
元件分類: Digital Transmission Controller
英文描述: DATACOM, FRAMER, PBGA256
封裝: 27 X 27 MM, PLASTIC, BGA-256
文件頁數: 52/134頁
文件大小: 900K
代理商: DS3112N
DS3112
24 of 134
Signal Name:
LRCLKA / LRCLKB
Signal Description:
Low Speed (T1 or E1) Receive Drop Port Serial Clock Outputs
Signal Type:
Output
These output signals present the demultiplexed serial clocks from one of the 28 T1 data streams or from
one of the 16/21 E1 data streams (see Section 7.4). The T1 or E1 serial data streams at the associated
LRDAT signals can be clocked out of the device either on rising edges (normal clock mode) or falling
edges (inverted clock mode) of LRCLK. This option is controlled via the LRCLKI control bit in Master
Control Register 2 (see Section 4.2). When the M13 / E13 multiplexer is disabled, then these outputs are
meaningless and should be ignored.
Signal Name:
LRCCLK
Signal Description:
Low Speed (T1 or E1) Receive Common Clock Input
Signal Type:
Input
If enabled via the LRCCEN control bit in Master Control Register 1 (see Section 4.2), all 28 LRCLK or
16/21 LRCLK can be slaved to this common clock input. In T3 mode, LRCCLK would be a 1.544 MHz
clock and in E3 mode, LRCCLK would be 2.048 MHz. Use of this configuration is only possible in
applications where it can be guaranteed that all of the multiplexed T1 or E1 signals at the far end are
based on a common clock. If this signal is not used, then it should be tied low. This signal can be
internally inverted. This option is controlled via the LRCLKI control bit in Master Control Register 2 (see
Section 4.2).
2.6 LOW SPEED (T1 OR E1) TRANSMIT PORT SIGNAL DESCRIPTION
Signal Name:
LTDAT1 to LTDAT28
Signal Description:
Low Speed (T1 or E1) Transmit Serial Data Inputs
Signal Type:
Input
These input signals sample the serial data from the 28 T1 data streams or the 16/21 E1 data streams that
will be multiplexed into a single T3 or E3 data stream. Data can be clocked into the device either on
falling edges (normal clock mode) or rising edges (inverted clock mode) of the associated LTCLK. This
option is controlled via the LTCLKI control bit in Master Control Register 2 (see Section 4.2). Also, the
data can be internally inverted before being multiplexed if enabled via the LTDATI control bit in Master
Control Register 2 (see Section 4.2). When the device is in the E3 Mode, LTDAT17 to LTDAT28 are
ignored and should be tied low. When the device is in the G747 Mode, LTDAT4, LTDAT8, LTDAT12,
LTDAT16, LTDAT20, LTDAT24, and LTDAT28 are ignored and should be tied low. When the M13 /
E13 multiplexer is disabled, then these inputs are ignored and should be tied low.
Signal Name:
LTCLK1 to LTCLK28
Signal Description:
Low Speed (T1 or E1) Transmit Serial Clock Inputs
Signal Type:
Input
These input signals clock data in from the 28 T1 data streams or from the 16/21 E1 data streams. The T1
or E1 serial data streams at the associated LTDAT signals can be clocked into the device either on falling
edges (normal clock mode) or rising edges (inverted clock mode) of LTCLK. This option is controlled via
the LTCLKI control bit in Master Control Register 2 (see Section 4.2). When the device is in the E3
Mode, LTCLK17 to LTCLK28 are meaningless and should be tied low. When the device is in the G747
Mode, LTCLK4, LTCLK8, LTCLK12, LTCLK16, LTCLK20, LTCLK24, and LTCLK28 are
meaningless and should be tied low. When the M13 / E13 multiplexer is disabled, then these inputs are
ignored and should be tied low.
相關PDF資料
PDF描述
DS3112 DATACOM, FRAMER, PBGA256
DS3131 SPECIALTY TELECOM CIRCUIT, PBGA256
DS3134 DATACOM, FRAMER, PBGA256
DS3150QN DATACOM, PCM TRANSCEIVER, PQCC28
DS3150Q DATACOM, PCM TRANSCEIVER, PQCC28
相關代理商/技術參數
參數描述
DS3112N+ 功能描述:網絡控制器與處理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS3112N+W 功能描述:網絡控制器與處理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS3112NC1 制造商:Maxim Integrated Products 功能描述:T3 E3 MULTIPLEXER, 3.3V T3/E3 FRAMER AND M13/E13/G.747 MUX - Rail/Tube
DS3112ND1E 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述:
DS3112RD 功能描述:網絡控制器與處理器 IC RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray