參數資料
型號: MC68HC05PD6
廠商: FREESCALE SEMICONDUCTOR INC
元件分類: 微控制器/微處理器
英文描述: 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PQFP80
封裝: PLASTIC, TQFP-80
文件頁數: 92/165頁
文件大小: 841K
代理商: MC68HC05PD6
GENERAL RELEASE SPECIFICATION
July 7, 1997
MOTOROLA
CENTRAL PROCESSING UNIT
MC68HC05PD6
3-2
REV 1.1
3.2
ACCUMULATOR (A)
The accumulator is a general purpose 8-bit register as shown in Figure 3-1. The
CPU uses the accumulator to hold operands and results of arithmetic calculations
or non-arithmetic operations. The accumulator is not affected by a reset of the
device.
3.3
INDEX REGISTER (X)
The index register shown in Figure 3-1 is an 8-bit register that can perform two
functions:
Indexed addressing
Temporary storage
In indexed addressing with no offset, the index register contains the low byte of
the operand address, and the high byte is assumed to be $00. In indexed
addressing with an 8-bit offset, the CPU nds the operand address by adding the
index register content to an 8-bit immediate value. In indexed addressing with a
16-bit offset, the CPU nds the operand address by adding the index register
content to a 16-bit immediate value.
The index register can also serve as an auxiliary accumulator for temporary
storage. The index register is not affected by a reset of the device.
3.4
STACK POINTER (SP)
The stack pointer shown in Figure 3-1 is a 16-bit register. In MCU devices with
memory space less than 64 Kbytes the unimplemented upper address lines are
ignored. The stack pointer contains the address of the next free location on the
stack. During a reset or the reset stack pointer (RSP) instruction, the stack pointer
is set to $00FF. The stack pointer is then decremented as data is pushed onto the
stack and incremented as data is pulled off the stack.
When accessing memory, the ten most signicant bits are permanently set to
0000000011. The six least signicant register bits are appended to these ten xed
bits to produce an address within the range of $00FF to $00C0. Subroutines and
interrupts may use up to 64($C0) locations. If 64 locations are exceeded, the
stack pointer wraps around and overwrites the previously stored information. A
subroutine call occupies two locations on the stack and an interrupt uses ve
locations.
相關PDF資料
PDF描述
MC68HC705PD6 8-BIT, OTPROM, 2.1 MHz, MICROCONTROLLER, PQFP80
MC68HC05PE0P 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP28
MC68HC05PE0CDW 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDSO28
MC68HC05PL4CSD 8-BIT, MROM, 2.56 MHz, MICROCONTROLLER, PDSO28
MC68HC705PL4BDW 8-BIT, OTPROM, 2.56 MHz, MICROCONTROLLER, PDSO28
相關代理商/技術參數
參數描述
MC68HC05PV8 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:Techinal Data - rev 1.9
MC68HC05PV8A 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:Techinal Data - rev 1.9
MC68HC05RC16 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:General Release Specification
MC68HC05RC16DW 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:General Release Specification
MC68HC05RC16FN 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:General Release Specification