
114
CHAPTER 5 LOW POWER CONSUMPTION MODE
MB90560 series
G
Switching to and release from standby mode
Table 5.6-3 lists switching to and release from standby mode.
Table 5.6-3 Switching to and release of standby mode
*1The microcontroller operates using the main clock during the PLL clock oscillation stabilization
wait state.
Transition
Conditions
Transition to main sleep
mode
[1] SLP = 1, MCS = 1 (Transition from main run state)
[2] SLP =1, MCS = 1 (Transition from PLL run state)
Release of main sleep mode
[3] Interrupt input
[4] External reset
Transition to stop mode
[5] STP =1, MCS = 1 (Transition from main run state)
[6] STP =1, MCS = 1 (Transition from PLL run state)
Release of stop mode
[7] Interrupt input ([10] indicates return to main run state after oscillation
stabilization wait.)
[8] External reset ([9] indicates external reset during oscillation stabili-
zation wait state.)
Transition to PLL sleep mode
<1>SLP = 1, MCS = 0 (Transition from PLL run state)
<2>SLP = 1, MCS = 0 (Transition from main run state, switch to PLL
clock after PLL clock oscillation stabilization wait) (*1)
Release of PLL sleep mode
<3>Interrupt input
<4>External reset
Transition to timebase timer
mode
<5>STP = 1, MCS = 0 (Transition from PLL run state)
<6>STP = 1, MCS = 0 (Transition from main run state, switch to PLL
clock after PLL clock oscillation stabilization wait) (*1)
Release of timebase timer
mode
<7>Interrupt input(*1)
<8>External reset (<9> After reset, return to PLL run state) (*1)