- 您現在的位置：買賣IC網 > PDF目錄385274 > DS33ZH11 (MAXIM INTEGRATED PRODUCTS INC) Ethernet Mapper PDF資料下載
參數資料
| 型號： | DS33ZH11 |
| 廠商： | MAXIM INTEGRATED PRODUCTS INC |
| 元件分類： | 網絡接口 |
| 英文描述： | Ethernet Mapper |
| 中文描述： | DATACOM, NETWORK INTERFACE SUPPORT CIRCUIT, PBGA100 |
| 封裝： | 10 X 10 MM, 1.41 MM HEIGHT, 0.80 MM PITCH, CSBGA-100 |
| 文件頁數： | 29/169頁 |
| 文件大?。?/td> | 1049K |
| 代理商： | DS33ZH11 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁當前第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁第105頁第106頁第107頁第108頁第109頁第110頁第111頁第112頁第113頁第114頁第115頁第116頁第117頁第118頁第119頁第120頁第121頁第122頁第123頁第124頁第125頁第126頁第127頁第128頁第129頁第130頁第131頁第132頁第133頁第134頁第135頁第136頁第137頁第138頁第139頁第140頁第141頁第142頁第143頁第144頁第145頁第146頁第147頁第148頁第149頁第150頁第151頁第152頁第153頁第154頁第155頁第156頁第157頁第158頁第159頁第160頁第161頁第162頁第163頁第164頁第165頁第166頁第167頁第168頁第169頁
DS33Z11 Ethernet Mapper
29 of 169
8 FUNCTIONAL DESCRIPTION
The DS33Z11 provides interconnection and mapping functionality between Ethernet Packet Systems and WAN
Time-Division Multiplexed (TDM) systems such as T1/E1/J1, HDSL, and T3/E3. The device is composed of a
10/100 Ethernet MAC, Packet Arbiter, Committed Information Rate controller (CIR), HDLC/X.86(LAPS) Mapper,
SDRAM interface, control ports, and Bit Error Rate Tester (BERT).
The Ethernet Packet interface supports MII and RMII interfaces allowing DSZ33Z11 to connect to commercially
available Ethernet PHY and MAC devices. The Ethernet interface can be configured for 10 Mbps or 100 Mbps
service, in DTE and DCE configurations. The DS33Z11 MAC interface rejects frames with bad FCS and short
frames (less than 64 bytes).
Ethernet frames are queued and stored in external 32-bit SDRAM. The DS33Z11 SDRAM controller enables
connection to a 128Mbit SDRAM without external glue logic, at clock frequencies up to 100 MHz. The SDRAM is
used for both the Transmit and Receive Data Queues. The Receive Queue stores data to be sent from the Packet
interface to the WAN interface. The Transmit Queue stores data to be sent from the WAN interface to the Packet
interface. The external SDRAM can accommodate up to 8192 frames with a maximum frame size of 2016 bytes.
The sizing of the queues can be adjusted by software. The user can also program high and low watermarks for
each queue that can be used for automatic or manual flow control. The packet data stored in the SDRAM is
encapsulated in HDLC or X.86 (LAPS) to be transmitted over the WAN interface. The device also provides the
capability for bit and packet scrambling.
The WAN interface also receives encapsulated Ethernet packets and transmits the extracted packets over the
Ethernet port. The WAN physical interface supports serial data streams up to 52 Mbps. The WAN serial port can
operate with a gapped clock, and can be connected to a framer, electrical LIU, optical transceiver, or T/E-Carrier
transceiver for transmission to the WAN. The WAN interface can be seamlessly connected to the Dallas
Semiconductor/Maxim T1/E1/J1 framers, LIUs, and SCTs. The WAN interface can also be seamlessly connected
to the Dallas Semiconductor/Maxim T3/E3/STS-1 framers, LIUs, and SCTs to provide T3, E3, and STS1
connectivity.
The DS33Z11 can be configured through an 8-bit microprocessor interface port. A serial EEPROM (SPI) interface
and hardware mode are also included for applications without a host microprocessor. Operation without an
external host simplifies and reduces the cost of typical applications such as connectivity to T1/T3 and E1/E3 front
ends. The DS33Z11 also provides two on-board clock dividers for the System Clock input and Reference Clock
Input for the 802.3 interfaces, further reducing the need for ancillary devices.
8.1 Processor Interface
Microprocessor control of the DS33Z11 is accomplished through the 20 interface pins of the microprocessor port.
The 8-bit parallel data bus can be configured for Intel or Motorola modes of operation with the two MODEC[1:0]
pins. When MODEC[1:0] = 00 and HWMODE = 0, bus timing is in Intel mode, as shown in
Figure 11-9
and
Figure 11-10
. When MODEC[1:0] = 01 and HWMODE = 0, bus timing is in Motorola mode, as shown in
Figure
11-11
and
Figure 11-12
. The address space is mapped through the use of 8 address lines, A0-A7. Multiplexed
Mode is not supported on the processor interface.
The Chip Select (
CS)
pin must be brought to a logic low level to gain read and write access to the microprocessor
port. With Intel timing selected, the Read (
RD
) and Write (
WR
) pins are used to indicate read and write operations
and latch data through the interface. With Motorola timing selected, the Read-Write (R
W
) pin is used to indicate
read and write operations while the Data Strobe (
DS
) pin is used to latch data through the interface.
The interrupt output pin (
INT
) is an open-drain output that will assert a logic-low level upon a number of software
maskable interrupt conditions. This pin is normally connected to the microprocessor interrupt input. The register
map is shown in
Table 9-1
.
相關PDF資料 |
PDF描述 |
|---|---|
| DS3803 | 1024K Flexible NV SRAM SIMM(1024K靈活的非易失性SRAM SIMM) |
| DS3903E-020 | Triple 128-Position Nonvolatile Digital Potentiometer |
| DS3994 | 4-Channel Cold-Cathode Fluorescent Lamp Controller |
| DS4077 | 77.76MHz VCXO |
| DS4077L-0C0 | 77.76MHz VCXO |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DS33ZH11+ | 功能描述:網絡控制器與處理器 IC 10/100 ENETXPORT HMODE MAP IND RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流（最大值）:595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray |
| DS34 | 制造商:LUMILEDS 制造商全稱:LUMILEDS 功能描述:power light source Luxeon V Emitter |
| DS-3400D UK | 制造商:TRUST 功能描述:DESKTOP WIRELESS OPTICAL TRUST |
| DS3404FP000 | 制造商:Thomas & Betts 功能描述:30A,PLG,3P4W,MG,404,3P480V |
| DS3404FP000/JG63 | 制造商:Thomas & Betts 功能描述:30A,CON,3P4W,MG,404,3P480V,JG63,SC |
發布緊急采購，3分鐘左右您將得到回復。