參數資料
型號: IDT88K8483BRI
廠商: IDT, Integrated Device Technology Inc
文件頁數: 28/162頁
文件大小: 0K
描述: IC SPI-4 EXCHANGE 3PORT 672-BGA
標準包裝: 24
系列: *
其它名稱: 88K8483BRI
123 of 162
October 20, 2006
IDT IDT88K8483
PFP Egress Packet Mode Control Registers
There are 64 registers, one for each LID.
PFP Link Number Configuration Register
PFP Buffer Management Configuration Register
Field
Read /
Write
Bits
Length Reset
State
Description
PKT_MODE
R/W
0:0
1
0
This field is used to program the PFP egress to interleaved mode or packet mode.
0: Interleaved mode. The LID is eligible to be served by the egress scheduler if
there is one or more packet fragment in the queue.The transfer unit is one packet
fragment.
1: Packet mode. The LID is eligible to be served by the egress scheduler if there are
one or more packets in the data memory.The transfer unit is one packet.
EBP_EN
R/W
0:1
1
0
This control bit enables early backpressure propagation.
0: Normal backpressure.
1:Enable early backpressure propagation.
Table 100 PFP Egress Packet Mode Control Register (Block Base=0x1600/0x1E00, Register Offset=0x00-0x3F)
Field
Read /
Write
Bits
Length Reset
State
Description
NR_LID
R/W
0:0-0:2
3
0
Link Identifier (LID) number configuration. Configures the maximum number of LIDs
that the application will use for this PFP data buffer. Once configured this value
should not be changed without resetting the IDT88K8483.
NR_LID Maximum number of LIDs
000
1
001
4
010
8
011
16
100
32
101
64
Table 101 PFP Link Number Configuration Register
(Block Base=0x1700/0x1F00, Register Offset=0x00)
Field
Read /
Write
Bits
Length Reset
State
Description
BUF_THR
R/W
0:0-1:0
9
0x1c0
Indicates the global threshold for segmented data buffer at which the backpressure
is initiated. This field must be configured before the overbooking mode is enabled
(OVBK_EN = 1). Unit is the number of LIDs.
OVBK_EN
R/W
1:1
1
0
This indicates the manner in which the 508 data buffer segments in the PFP are
managed.
0: Non-overbooking mode.This means that the number of data buffer segments allo-
cated to each LID is limited by the M field in PFP Buffer Segment Assign Table
1:Enable overbooking mode. This means that data buffer segments can now be
shared between LIDs up to 8 times the value of M if free segments are available.
Table 102 PFP Buffer Management Configuration Register (Block Base=0x1700/0x1F00, Register Offset=0x01)
相關PDF資料
PDF描述
IDT88P8341BHI IC SPI3-SPI4 EXCHANGE 820-PBGA
IDT88P8342BHI IC SPI3-SPI4 EXCHANGE 820-PBGA
IDT88P8344BHI IC SPI3-SPI4 EXCHANGE 820-PBGA
IDT89H24NT24G2ZBHLG IC PCI SW 24LANE 24PORT 324BGA
IDT89HPES16NT2ZBBCG IC PCI SW 16LANE 2PORT 484-CABGA
相關代理商/技術參數
參數描述
IDT88P8341BHGI 功能描述:IC SPI3-SPI4 EXCHANGE 820-PBGA RoHS:是 類別:集成電路 (IC) >> 專用 IC 系列:* 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA(27x27) 包裝:散裝
IDT88P8341BHI 功能描述:IC SPI3-SPI4 EXCHANGE 820-PBGA RoHS:否 類別:集成電路 (IC) >> 專用 IC 系列:* 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA(27x27) 包裝:散裝
IDT88P8342BHGI 功能描述:IC SPI3-SPI4 EXCHANGE 820-PBGA RoHS:是 類別:集成電路 (IC) >> 專用 IC 系列:* 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA(27x27) 包裝:散裝
IDT88P8342BHI 功能描述:IC SPI3-SPI4 EXCHANGE 820-PBGA RoHS:否 類別:集成電路 (IC) >> 專用 IC 系列:* 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 類型:調幀器 應用:數據傳輸 安裝類型:表面貼裝 封裝/外殼:400-BBGA 供應商設備封裝:400-PBGA(27x27) 包裝:散裝
IDT88P8344 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:SPI EXCHANGE 4 x SPI-3 TO SPI-4 Issue 1.0