參數資料
型號: DS3112
廠商: DALLAS SEMICONDUCTOR
元件分類: Digital Transmission Controller
英文描述: DATACOM, FRAMER, PBGA256
封裝: 27 X 27 MM, PLASTIC, BGA-256
文件頁數: 98/134頁
文件大?。?/td> 900K
代理商: DS3112
DS3112
66 of 134
6.3 T2 / E2 / G747 FRAMER STATUS AND INTERRUPT REGISTER
DESCRIPTION
Register Name:
T2E2SR1
Register Description:
T2/E2 Status Register 1
Register Address:
34h
Bit #
7
654
321
0
Name
IELOF
LOF7
LOF6
LOF5
LOF4
LOF3
LOF2
LOF1
Default
0
---
-
Bit #
15
141312
1110
9
8
Name
IEAIS
AIS7
AIS6
AIS5
AIS4
AIS3
AIS2
AIS1
Default
0
---
-
Note: See Figure 6.3A for details on the signal flow for the status bits in the T2E2SR1 register.
Note: Bits that are underlined are read only; all other bits are read-write.
Bits 0 to 6 / Loss Of Frame Occurrence (LOFn when n = 1 to 7). This latched read only alarm status
bit will be set to a one each time the corresponding T2/E2/G747 framer detects a Loss Of Frame (LOF).
This bit will be cleared when read unless a LOF condition still exists in that T2/E2/G747 framer. A
change in state of the LOF in one or more of the T2/E2/G747 framers can cause the T2E2SR1 status bit
(in the MSR register) to be set and a hardware interrupt to occur if the IELOF bit is set to a one and the
T2E2SR1 bit in the Interrupt Mask for MSR (IMSR) register is set to a one.
See Figure 6.3A. The
interrupt will be allowed to clear when this bit is read. The LOF alarm criteria is described in Tables
6.3A, 6.3B and 6.3C. In the E3 Mode, LOF5 to LOF7 (bits 4 to 6) are meaningless and should be
ignored.
Bit 7 / Interrupt Enable for Loss of Frame Occurrence (IELOF). This bit should be set to one if the
Host wishes to have T2/E2/G747 LOF occurrences cause a hardware interrupt or the setting of the
T2E2SR1 status bit in the MSR register. See Figure 6.3A. The T2E2SR1 bit in the Interrupt Mask for the
Master Status Register (IMSR) must also be set to one for an interrupt to occur.
0 = interrupt masked
1 = interrupt unmasked
Bits 8 to 14 / Alarm Indication Signal Detected (AISn when n = 1 to 7). This latched read only alarm
status bit will be set to a one each time the corresponding T2/E2/G747 framer detects an incoming AIS
alarm. This bit will be cleared when read unless the AIS alarm still exists in that T2/E2/G747 framer. A
change in state of the AIS detector in one or more of the T2/E2/G747 framers can cause the T2E2SR1
status bit (in the MSR register) to be set and a hardware interrupt to occur if the IEAIS bit is set to a one
and the T2E2SR1 bit in the Interrupt Mask for MSR (IMSR) register is set to a one. See Figure 6.3A.
The interrupt will be allowed to clear when this bit is read. The AIS alarm criteria is described in Tables
6.3A, 6.3B and 6.3C. In the E3 Mode, AIS5 to AIS7 (bits 4 to 6) are meaningless and should be ignored.
Bit 15 / Interrupt Enable for Alarm Indication Signal (IEAIS). This bit should be set to one if the
Host wishes to have T2/E2/G747 AIS detection occurrences cause a hardware interrupt or the setting of
the T2E2SR1 status bit in the MSR register. See Figure 6.3A. The T2E2SR1 bit in the Interrupt Mask for
the Master Status Register (IMSR) must also be set to one for an interrupt to occur.
0 = interrupt masked
1 = interrupt unmasked
相關PDF資料
PDF描述
DS3131 SPECIALTY TELECOM CIRCUIT, PBGA256
DS3134 DATACOM, FRAMER, PBGA256
DS3150QN DATACOM, PCM TRANSCEIVER, PQCC28
DS3150Q DATACOM, PCM TRANSCEIVER, PQCC28
DS3150TN DATACOM, PCM TRANSCEIVER, PDIP48
相關代理商/技術參數
參數描述
DS3112+ 功能描述:網絡控制器與處理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS3112+W 功能描述:網絡控制器與處理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS3112D1 功能描述:網絡控制器與處理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS3112D1+ 功能描述:網絡控制器與處理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS3112DK 功能描述:網絡開發工具 DS3112 Dev Kit RoHS:否 制造商:Rabbit Semiconductor 產品:Development Kits 類型:Ethernet to Wi-Fi Bridges 工具用于評估:RCM6600W 數據速率:20 Mbps, 40 Mbps 接口類型:802.11 b/g, Ethernet 工作電源電壓:3.3 V