參數資料
型號: DS3112
廠商: DALLAS SEMICONDUCTOR
元件分類: Digital Transmission Controller
英文描述: DATACOM, FRAMER, PBGA256
封裝: 27 X 27 MM, PLASTIC, BGA-256
文件頁數: 85/134頁
文件大?。?/td> 900K
代理商: DS3112
DS3112
54 of 134
Bit 3 / Remote Alarm Indication Detected (RAI). This latched read only alarm status bit will be set to
a one when the T3 or E3 framer detects an incoming Remote Alarm Indication (RAI) signal. This bit will
be cleared when read unless an RAI signal is still present. A change in state of the RAI detection can
cause a hardware interrupt to occur if the RAI bit in the Interrupt Mask for T3E3SR (IT3E3SR) register is
set to a one and the T3E3SR bit in the Interrupt Mask for MSR (IMSR) register is set to a one. The
interrupt will be allowed to clear when this bit is read. The RAI alarm detection criteria is described in
Tables 5.3A and 5.3B. RAI can also be indicated via the FEAC codes when the device is operated in the
C-Bit Parity Mode.
Bit 4 / T3 Idle Signal Detected (T3IDLE). This latched read only alarm status bit will be set to a one
when the T3 framer detects an incoming idle signal. This bit will be cleared when read unless the idle
signal is still present. A change in state of idle detection can cause a hardware interrupt to occur if the
IDLE bit in the Interrupt Mask for T3E3SR (IT3E3SR) register is set to a one and the T3E3SR bit in the
Interrupt Mask for MSR (IMSR) register is set to a one. The IDLE detection criteria is described in Table
5.3A. The interrupt will be allowed to clear when this bit is read. When the DS3112 is operated in the
E3 mode, this status bit should be ignored.
Bit 5 / Transmit T3/E3 Start Of Frame (TSOF). This latched read only event status bit will be set to a
one on each T3/E3 transmit frame boundary. This bit is a software version of the FTSOF hardware signal
and it will be cleared when read. The setting of this bit can cause a hardware interrupt to occur if the
TSOF bit in the Interrupt Mask for T3E3SR (IT3E3SR) register is set to a one and the T3E3SR bit in the
Interrupt Mask for MSR (IMSR) register is set to a one.
Bit 6 / Receive T3/E3 Start Of Frame (RSOF). This latched read only event status bit will be set to a
one on each T3/E3 receive frame boundary. This bit is a software version of the FRSOF hardware signal
and it will be cleared when read. The setting of this bit can cause a hardware interrupt to occur if the
RSOF bit in the Interrupt Mask for T3E3SR (IT3E3SR) register is set to a one and the T3E3SR bit in the
Interrupt Mask for MSR (IMSR) register is set to a one.
相關PDF資料
PDF描述
DS3131 SPECIALTY TELECOM CIRCUIT, PBGA256
DS3134 DATACOM, FRAMER, PBGA256
DS3150QN DATACOM, PCM TRANSCEIVER, PQCC28
DS3150Q DATACOM, PCM TRANSCEIVER, PQCC28
DS3150TN DATACOM, PCM TRANSCEIVER, PDIP48
相關代理商/技術參數
參數描述
DS3112+ 功能描述:網絡控制器與處理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS3112+W 功能描述:網絡控制器與處理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS3112D1 功能描述:網絡控制器與處理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS3112D1+ 功能描述:網絡控制器與處理器 IC TEMPE T3/E3 MUX FRMR & M13/E13/G.747 MUX RoHS:否 制造商:Micrel 產品:Controller Area Network (CAN) 收發器數量: 數據速率: 電源電流(最大值):595 mA 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:PBGA-400 封裝:Tray
DS3112DK 功能描述:網絡開發工具 DS3112 Dev Kit RoHS:否 制造商:Rabbit Semiconductor 產品:Development Kits 類型:Ethernet to Wi-Fi Bridges 工具用于評估:RCM6600W 數據速率:20 Mbps, 40 Mbps 接口類型:802.11 b/g, Ethernet 工作電源電壓:3.3 V