參數資料
型號： MC92604ZT
廠商： Freescale Semiconductor
文件頁數： 56/122頁
文件大小： 0K
描述： IC TXRX ETH DUAL GIG 196-MAPBGA
標準包裝： 630
類型： 收發器
驅動器/接收器數： 2/2
規程： 千兆位以太網
電源電壓： 4.5 V ~ 5.5 V
安裝類型： 表面貼裝
封裝/外殼： 196-LBGA
供應商設備封裝： 196-MAPBGA（15x15）
包裝： 托盤
Receiver
MC92604 Dual Gigabit Ethernet Transceiver Reference Manual, Rev. 1
Freescale Semiconductor
3-5
3.3
Functional Description
The MC92604 receiver receives differential data in one of two operating ranges. It may be operated in full
rate range with a maximum data rate of 1.0 Gbps (1.25 Gigabaud) or at half-rate at
500 Mbps (0.625 Gigabaud). The operating range is determined by the state of the HSE input and the
frequency of the reference clock, see Table 5-1.
Transmitted data is recovered using an oversampled transition tracking method. The received serial data
is accumulated into 10-bit characters. The 10-bit characters are forwarded to the 8B/10B decoder where
the original data is obtained. Alternately, the decoder can be bypassed, and the 10-bit character is
forwarded to the receiver interface in the 10-bit interface (TBI) mode.
The receiver provides for byte (character) alignment. Alignment assures that the byte, presented at the
input of the transmitter is preserved when it is presented by the receiver. Optionally, alignment may be
disabled if in the backplane 10- or 5-bit mode.
The code group alignment is obtained by aligning to COMMA (K28.1, K28.5, or K28.7) code groups.
Alignment is achieved when four COMMA code groups with the same alignment, are detected.
NOTE
The COMMA code group (K28.7) should be used carefully since the
combination of this code group with some adjoining code groups will yield
false COMMA alignment.
The receiver also provides for word synchronization (this feature is available only in ‘backplane’ operating
modes). In this mode, two receivers are being used cooperatively to receive 16-bit (20-bit in TBI mode)
words. Word synchronization ensures that the receivers present the 4 bytes of a word simultaneously.
At the receiver interface is where the received bytes and status codes are obtained. The receiver interface
has several modes of operation and timing that allow it to be used in a variety of applications. The
following sections provide a detailed description of the receiver and its modes of operation.
3.3.1
Input Amplifier
The input amplifiers connect directly to the link input pads RLINK_x_P and RLINK_x_N. It is a
differential amplifier with an integrated analog multiplexer for loopback testing. Link termination resistors
are integrated with the amplifier. The termination resistance is either 100 or 150
differential depending
on the state of the MEDIA configuration input pin. Termination resistance is 100
(differential) when the
MEDIA is low and 150
(differential) when the MEDIA is high.
The input amplifier facilitates a loopback path for production and in-system testing. When the MC92604
is in loopback mode (loopback enable, LBE, is high), the input amplifier selects the loopback differential
input signals and ignores the state on the RLINK_x_P and RLINK_x_N signals. This allows in-system
loopback BIST independent of the current input state. See Chapter 6, “Test Features,” for complete
information on test modes.
相關PDF資料
PDF描述
MCP2120T-I/SL IC ENCODR/DECODR 2.5V IR 14-SOIC
MCP2122-E/P IC ENCODER/DECODER IRDA 8-DIP
MCP2122T-E/SNG IC ENCODER/DECODR INFRARED 8SOIC
MCP3901A0T-E/SS IC ENERGY METER AFE 2CH 20-SSOP
MCP3903T-E/SS IC AFE 24BIT 64KSPS 6CH 28SSOP
相關代理商/技術參數
參數描述
MC92610 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:Quad 3.125 Gbaud SERDES
MC92610VF 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:Quad 3.125 Gbaud SERDES
MC928G 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:Motorola Inc 功能描述: 制造商:MOTOROLA 功能描述:
MC929F 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:Motorola Inc 功能描述:
MC929G 制造商:Rochester Electronics LLC 功能描述:- Bulk
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*