參數資料
型號： ARM610
廠商： Mitel Networks Corporation
英文描述： General Purpose 32-Bit Microprocessor with 4kByte Cache,Write Buffer and Memory Management Unit(通用32位微處理器（帶4K字節緩存，寫緩沖器和存儲器管理單元）)
中文描述： 通用32位微處理器4KB的高速緩存，寫緩沖器和存儲器管理單元（通用32位微處理器（帶4K的字節緩存，寫緩沖器和存儲器管理單元））
文件頁數： 43/174頁
文件大?。?/td> 694K
代理商： ARM610
Instruction Set - TEQ, TST, CMP, CMN
ARM610 Data Sheet
4-15
O
4.4.3 Immediate operand rotates
The immediate operand rotate field is a 4-bit unsigned integer which specifies a shift
operation on the 8-bit immediate value. This value is zero extended to 32 bits, and then
subject to a rotate right by twice the value in the rotate field. This enables many
common constants to be generated, for example all powers of 2.
4.4.4 Writing to R15
When Rd is a register other than R15, the condition code flags in the CPSR may be
updated from the ALU flags as described above.
When Rd is R15 and the S flag in the instruction is not set the result of the operation
is placed in R15 and the CPSR is unaffected.
When Rd is R15 and the S flag is set the result of the operation is placed in R15 and
the SPSR corresponding to the current mode is moved to the CPSR. This allows state
changes which atomically restore both PC and CPSR. This form of instruction should
not be used in User mode.
4.4.5 Using R15 as an operand
If R15 (the PC) is used as an operand in a data processing instruction the register is
used directly.
The PC value will be the address of the instruction, plus 8 or 12 bytes due to instruction
prefetching. If the shift amount is specified in the instruction, the PC will be 8 bytes
ahead. If a register is used to specify the shift amount the PC will be 12 bytes ahead.
4.4.6 TEQ, TST, CMP and CMN opcodes
Note
TEQ, TST, CMP and CMN do not write the result of their operation but do set flags in
the CPSR. An assembler should always set the S flag for these instructions even if this
is not specified in the mnemonic.
The TEQP form of the TEQ instruction used in earlier ARM processors must not be
used: the PSR transfer operations should be used instead.
The action of TEQP in the ARM610 is to move SPSR_<mode> to the CPSR if the
processor is in a privileged mode and to do nothing if in User mode.
4.4.7 Assembler syntax
1
MOV,MVN (single operand instructions.)
<opcode>{cond}{S} Rd,<Op2>
2
CMP,CMN,TEQ,TST (instructions which do not produce a result.)
<opcode>{cond} Rn,<Op2>
3
AND,EOR,SUB,RSB,ADD,ADC,SBC,RSC,ORR,BIC
<opcode>{cond}{S} Rd,Rn,<Op2>
相關PDF資料
PDF描述
ARRAYS NIGHT VISION H.V. RECTIFIER DIODES & ARRAYS
ARS2540 40A GLASS PASSIVATED AVALANCHE BUTTON DIODE
AR2540 40A GLASS PASSIVATED AVALANCHE BUTTON DIODE
ARS25A 25A AUTOMOTIVE BUTTON DIODE
ARS25J 25A AUTOMOTIVE BUTTON DIODE
相關代理商/技術參數
參數描述
ARM7-009 制造商:Gravitech 功能描述:ARM7 LPC2378 W/2.8" TCH SCRN LCD BLU
ARM720T 制造商:未知廠家 制造商全稱:未知廠家 功能描述:General-purpose 32-bit Microprocessor with 8KB cache, enlarged Write buffer, and Memory Management Unit (MMU) combined in a single chip
ARM7DIMM-LPC2478 功能描述:模塊化系統 - SOM LPC2478 ARM7 DIMM Module, Rev 2.2 RoHS:否 制造商:Digi International 外觀尺寸:ConnectCore 9P 處理器類型:ARM926EJ-S 頻率:150 MHz 存儲容量:8 MB, 16 MB 存儲類型:NOR Flash, SDRAM 接口類型:I2C, SPI, UART 工作電源電壓:3.3 V 最大工作溫度:+ 85 C 尺寸:1.97 in x 1.97 in x 6.1 in
ARM7TDI 制造商:未知廠家 制造商全稱:未知廠家 功能描述:周立功的中文ARM7TDI文檔
ARM7TDMI 制造商:未知廠家 制造商全稱:未知廠家 功能描述:general purpose 32-bit microprocessors
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*