XRT72L71
á
DS3 ATM UNI/CLEAR CHANNEL FRAMER
REV. 1.1.0
78
TABLE 79: RX CP INTERRUPT ENABLE REGISTER
REGISTER 78
RX CP INTERRUPT ENABLE REGISTER
HEX ADDRESS: 0X4E
BIT
FUNCTION
TYPE
DEFAULT
DESCRIPTION-OPERATION
7-3
Unused
RO
0
2
OAM Interrupt Enable
R/W
0
0: “Receipt of OAM Cell” Interrupt is disabled.
1: “Receipt of OAM Cell” Interrupt is enabled.
NOTE: This bit-field is only active if the XRT72L71 is operating in the “ATM
UNI” Mode.
1
LCD Interrupt Enable
R/W
0
0: “Change in LCD (Loss of Cell Delineation) Condition” Interrupt is dis-
abled.
1: “Change in LCD Condition” Interrupt is enabled.
NOTE: This bit-field is only active if the XRT72L71 is operating in the “ATM
UNI” Mode.
0
HEC Error Interrupt Enable
R/W
0
0: “Detection of HEC Byte Error” Interrupt is disabled.
1: “Detection of HEC Byte Error” Interrupt is enabled.
NOTE: This bit-field is only active if the XRT72L71 is operating in the “ATM
UNI” Mode.