
IDTP95020
Product Datasheet
September 2, 2011 Revision 1.3 Final
6
2011 Integrated Device Technology, Inc.
ESD Warning
The IDTP95020 is an ESD (electrostatic discharge)
sensitive device. The human body and test equipment
can accumulate and discharge electrostatic charges up to
4000 Volts without detection.
Even though the
IDTP95020 implements internal ESD protection circuitry,
proper ESD precautions should be followed to avoid
damaging the functionality or performance.
RECOMMENDED OPERATING CONDITIONS
Table 2. Recommended Operating Conditions1
SYMBOL
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNIT
CHRG_INPUT
USB or AC Adaptor Charger Input
4.35
5.5
V
CHRG_BAT
Battery Input Source
When VBAT providing power
3.0
4.5
V
PVDD
CLASS_D BTL Input Power Supply
3.0
5.0
V
LDO_IN1, IN2, IN3
Input voltage for LDO
3.0
5.5
V
BUCK500_0_IN,
BUCK500_1_IN,
BUCK1000_IN
BUCK0, 1, 2 Input voltage
3.0
5.25
V
LED_BOOST_VIN
LED Boost Converter gate bias
supply
3.0
5.5
V
VDDIO_CK voltage
Power Supply for TCXO_OUT1,
TCXO_OUT2
1.1
1.9
V
HSPWR
Hot Swap Switches Power Supply
Do not tie to ground or
floating
3.0
5.5
V
LDO_050_0
Power Supply for I2C Slave Channel,
I2S Channel 1 and 2
1.7
3.6
V
TA
Ambient Operating Temperature
0
70
°C
TJ
Operating Junction Temperature
-40
125
°C
θJA
Maximum Thermal Resistance
Junction to Ambient
23.5
°C/W
θJC
Maximum Thermal Resistance
Junction to Case
7.6
°C/W
θJB
Maximum Thermal Resistance
Junction to Board
0.15
°C/W
PD
Maximum Package Power Dissipation
2.3
W
Note 1 - Per JEDEC spec, the NQG QFN-132 package is rated at MSL3.
POWER CONSUMPTION
Overall Power Consumption
Table 3. Overall Power Consumption
MODE
DESCRIPTION
CHARGE_BAT
TYPICAL
CONSUMPTION
Sleep
USB or AC Adaptor is not present, a main battery is present and
well-charged. Always on LDO_LP is on, RTC is on and RTC
registers are maintained. Wake-up capabilities (Switch Detect Input)
are available.
VBAT = 3.8V
85 * 3.8 = 323 W
Standby
USB or AC Adaptor is not present, a main battery is present and
well-charged. Always on LDO_LP is on, all DC-DC Bucks in PFM
mode. All LDOs are on, no load.
VBAT = 3.8V
385 * 3.8 = 1463 W
Touch Controller
Standby
USB or AC Adaptor is not present, a main battery is present and
well-charged. Always on LDO_LP is on, touch screen controller is
on, LDO_050_0 is on.
VBAT = 3.8V
7.4 * 3.8 = 28.12 mW