參數資料
型號: ADUC834BS
廠商: ANALOG DEVICES INC
元件分類: 微控制器/微處理器
英文描述: MicroConverter, Dual 16-/24- Bit ADCs with Embedded 62KB FLASH MCU
中文描述: 8-BIT, FLASH, 12.58 MHz, MICROCONTROLLER, PQFP52
封裝: 14 X 14 MM, MO-022-AC-1, MQFP-52
文件頁數: 55/72頁
文件大小: 1451K
代理商: ADUC834BS
REV.
P
rC (12 March 2002)
ADuC834
55
PRELIMINARY TECHNICAL DATA
T MOD
SFR Address
Power-On Default Value
Bit Addressable
T imer/C ounter 0 and 1 Mode Register
89H
00H
No
T able X X VI. T MOD SFR Bit Designations
Bit
Name
Description
7
Gate
T imer 1 Gating Control.
Set
by software to enable timer/counter 1 only while
INT 1
pin is high and T R1 control bit is set.
Cleared
by software to enable timer 1 whenever T R1 control bit is set.
T imer 1 T imer or Counter Select Bit.
Set
by software to select counter operation (input from T 1 pin).
Cleared
by software to select timer operation (input from internal system clock).
T imer 1 Mode Select Bit 1 (Used with M0 Bit).
T imer 1 Mode Select Bit 0.
M1
M0
0
0
T H1 operates as an 8-bit timer/counter. T L1 serves as 5-bit prescaler.
0
1
16-Bit T imer/Counter. T H1 and T L1 are cascaded; there is no prescaler.
1
0
8-Bit Auto-Reload T imer/Counter. T H1 holds a value which is to be
reloaded into T L1 each time it overflows.
1
1
T imer/Counter 1 Stopped.
T imer 0 Gating Control.
Set
by software to enable timer/counter 0 only while
INT 0
pin is high and T R0 control bit is set.
Cleared
by software to enable T imer 0 whenever T R0 control bit is set.
T imer 0 T imer or Counter Select Bit.
Set
by software to select counter operation (input from T 0 pin).
Cleared
by software to select timer operation (input from internal system clock).
T imer 0 Mode Select Bit 1.
T imer 0 Mode Select Bit 0.
M1
M0
0
0
T H0 operates as an 8-bit timer/counter. T L0 serves as 5-bit prescaler.
0
1
16-Bit T imer/Counter. T H0 and T L0 are cascaded; there is no prescaler
1
0
8-Bit Auto-Reload T imer/Counter. T H0 holds a value which is to be
reloaded into T L0 each time it overflows.
1
1
T L0 is an 8-bit timer/counter controlled by the standard timer 0 control
bits. T H0 is an 8-bit timer only, controlled by T imer 1 control bits.
6
C/
T
5
4
M1
M0
3
Gate
2
C/
T
1
0
M1
M0
T IME RS/C OUNT E RS
T he ADuC 834 has three 16-bit T imer/C ounters: T imer 0,
T imer 1, and T imer 2. T he T imer/Counter hardware has been
included on-chip to relieve the processor core of the over-
head inherent in implementing timer/counter functionality
in software. Each T imer/Counter consists of two 8-bit registers
T Hx and T Lx (x = 0, 1 and 2). All three can be configured to
operate either as timers or event counters.
In
T imer
function, the T Lx register is incremented every ma-
chine cycle. T hus one can think of it as counting machine cycles.
Since a machine cycle consists of 12 core clock periods, the
maximum count rate is 1/12 of the core clock frequency.
In
Counter
function, the T Lx register is incremented by a 1-to-
0 transition at its corresponding external input pin, T 0, T 1, or
T 2. In this function, the external input is sampled during
S5P2 of every machine cycle. When the samples show a high in
one cycle and a low in the next cycle, the count is
incremented. T he new count value appears in the register during
S3P1 of the cycle following the one in which the transition was
detected. Since it takes two machine cycles (16 core clock periods)
to recognize a 1-to-0 transition, the maximum count rate is 1/16
of the core clock frequency. T here are no restrictions on the
duty cycle of the external input signal, but to ensure that a
given level is sampled at least once before it changes, it must be
held for a minimum of one full machine cycle. Remember that
the core clock frequency is programmed via the CD0
2 selec-
tion bits in the PLLCON SFR.
User configuration and control of the timers is achieved via
three main SFRs. T MOD and T CON control the configura-
tion of timers 0 and 1 while T 2CON configures timer 2.
相關PDF資料
PDF描述
ADUM1310BRWZ Triple-Channel Digital Isolator with Programmable Default Output
ADUM1310BRWZ-RL Triple-Channel Digital Isolator with Programmable Default Output
ADUM3300 Triple-Channel, Digital Isolators, Enhanced System-Level ESD Reliability
ADUM3300ARWZ Triple-Channel, Digital Isolators, Enhanced System-Level ESD Reliability
ADUM3300BRWZ Triple-Channel, Digital Isolators, Enhanced System-Level ESD Reliability
相關代理商/技術參數
參數描述
ADUC834BSZ 功能描述:IC ADC DUAL16/24BIT W/MCU 52MQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:MicroConverter® ADuC8xx 標準包裝:250 系列:56F8xxx 核心處理器:56800E 芯體尺寸:16-位 速度:60MHz 連通性:CAN,SCI,SPI 外圍設備:POR,PWM,溫度傳感器,WDT 輸入/輸出數:21 程序存儲器容量:40KB(20K x 16) 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:6K x 16 電壓 - 電源 (Vcc/Vdd):2.25 V ~ 3.6 V 數據轉換器:A/D 6x12b 振蕩器型:內部 工作溫度:-40°C ~ 125°C 封裝/外殼:48-LQFP 包裝:托盤 配用:MC56F8323EVME-ND - BOARD EVALUATION MC56F8323
ADUC836 制造商:AD 制造商全稱:Analog Devices 功能描述:MicroConverter, Dual 16-Bit-ADCs with Embedded 62 kB Flash MCU
ADUC836_02 制造商:AD 制造商全稱:Analog Devices 功能描述:MicroConverter, Dual 16-Bit ADCs with Embedded 62 kB Flash MCU
ADUC836BCP 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述:
ADUC836BCPZ 功能描述:IC MCU 62K FLASH ADC/DAC 56LFCSP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微控制器, 系列:MicroConverter® ADuC8xx 標準包裝:38 系列:Encore!® XP® 核心處理器:eZ8 芯體尺寸:8-位 速度:5MHz 連通性:IrDA,UART/USART 外圍設備:欠壓檢測/復位,LED,POR,PWM,WDT 輸入/輸出數:16 程序存儲器容量:4KB(4K x 8) 程序存儲器類型:閃存 EEPROM 大小:- RAM 容量:1K x 8 電壓 - 電源 (Vcc/Vdd):2.7 V ~ 3.6 V 數據轉換器:- 振蕩器型:內部 工作溫度:-40°C ~ 105°C 封裝/外殼:20-SOIC(0.295",7.50mm 寬) 包裝:管件 其它名稱:269-4116Z8F0413SH005EG-ND