參數資料
型號： 28233-11
廠商： CONEXANT SYSTEMS
元件分類： 數字傳輸電路
英文描述： ATM Transmitter/Receiver with UTOPIA Interface
中文描述： TRANSCEIVER, PQFP160
封裝： PLASTIC, MQFP-160
文件頁數： 93/161頁
文件大?。?/td> 1832K
代理商： 28233-11
CN8223
3.0 Registers
ATM Transmitter/Receiver with UTOPIA Interface
3.3 Configuration Control Registers
100046C
Conexant
3-7
1
0
1
0
1
1
1
1
0x01
—
CONFIG_2 (Configuration Control Register 2)
The CONFIG_2 register is located at address 0x01 and controls transmit formatting and alarm generation.
Table 3-4
defines Alarm Controls for the Line Framing/PHY Formats.
Table 3-5
defines the control bits for
STS-1/STS-3c/STM-1.
Table 3-6
defines the overhead bits for Line Framing/PHY Formats.
Bit
Field
Size
Name
Description
15
1
Enable External
Overhead
Enables all overhead octets to be inserted externally in STS-1/STS-3c/STM-1 and
G.832 E3/E4 modes. If this bit is not set, internal generation of overhead octets is
enabled as described in
Section 2.3
.
14
1
All-Zeros FEBE
Inserts an all-0s value in the FEBE field. The all-0s value provides an indication at
the far end that no BIP-8 errors are being detected. BIP-8 status and error counts
are not affected. This control bit is active in all modes whether the FEBE field is
single- or multi-bit.
13
1
All-1s FEBE
Inserts an all-1s value in the FEBE field of the transmit frame. The all-1s value
notifies the far end that the FEBE function is inhibited. BIP-8 status and error counts
are not affected. This control bit is active in all modes whether the FEBE field is
single- or multi-bit.
12
–
10
3
BIP Error Insert
Selects the BIP field that will be errored with the TXFEAC_ERRPAT register
according to the following:
These bits are cleared by the transmitter after the error is inserted in the overhead
field, and can be read as 0 to verify that error insertion has taken place.
9
–
4
6
Transmit Alarm
Control
Controls the generation of alarms for 57-octet PLCPs and internal framers. No
alarms are transmitted if all bits in this control field are set to 0. Setting any of these
bits to a 1 causes an alarm to be transmitted according to
Table 3-4
and
Table 3-5
.
For example, in STS-3c mode, setting bit 4 to a 1 will cause the Line AIS alarm to be
transmitted.
3
–
0
4
Overhead Control
Selectively disables overhead generation. Standard overhead is generated internally
if all bits in this control field are set to 0. Overhead sources for all PHY modes are
given in
Table 2-8
. When a particular overhead field is set to be disabled, it will be
filled with 0s. Overhead generation is disabled dependent on mode, according to the
data in
Table 3-6
.
Bit 12
0
0
0
0
Bit 11
0
0
1
1
Bit 10
0
1
0
1
0
1
0
1
BIP Field to be Errored
No errors inserted
B1 field (all modes)
B2 field, bits 23:16 (STS-3c/STM-1 mode only)
B2 field, bits 15:8 (STS-3c/STM-1 mode only)
B2 field, bits 7:0 (STS-1/STS-3c/STM-1 modes)
B3 field (STS-1/STS-3c/STM-1 modes)
No errors inserted
B2 field, all 3 octets (STS-3c/STM-1 mode)
相關PDF資料
PDF描述
28C010TRPDB-12 150 x 32 pixel format, LED Backlight available
28C010TRT1DE-15 1 Megabit (128K x 8-Bit) EEPROM
28C010TRT1DE-20 1 Megabit (128K x 8-Bit) EEPROM
28C010TRT1FB-15 1 Megabit (128K x 8-Bit) EEPROM
28C010TRT1FB-20 1 Megabit (128K x 8-Bit) EEPROM
相關代理商/技術參數
參數描述
282332-2 制造商:TE Connectivity 功能描述:
282-333 制造商:WAGO Innovative Connections 功能描述:END PLATE RAIL MOUNTED TERMINAL BLOCK 制造商:WAGO 功能描述:END PLATE, RAIL MOUNTED TERMINAL BLOCK 制造商:WAGO Innovative Connections 功能描述:END PLATE, RAIL MOUNTED TERMINAL BLOCK; Series:282; Accessory Type:End Plate; For Use With:Rail Mounted Terminal Blocks; Color:Orange; Mounting Type:DIN Rail ;RoHS Compliant: Yes
2823337 功能描述:工業繼電器 ST-REL4-KG120/21-21 RoHS:否 制造商:TE Connectivity / Kilovac 觸點形式:1 Form A (SPST-NO) 觸點電流額定值: 線圈電壓:9 VDC to 36 VDC 線圈電阻:38 Ohms 線圈電流: 切換電壓: 安裝風格:Panel 觸點材料:Silver Palladium
282-334 制造商:WAGO Innovative Connections 功能描述:End Plate 2 mm Thick-Color Grey For Use With Rail Mounted Terminal Block 制造商:WAGO 功能描述:GREY END PLATE 制造商:WAGO Innovative Connections 功能描述:END PLATE, 2MM, GREY; Series:-; Accessory Type:End Plate; For Use With:Rail Mounted Terminal Blocks ;RoHS Compliant: Yes
282-334 制造商:WAGO Innovative Connections 功能描述:END PLATE 制造商:WAGO 功能描述:END PLATE
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*