參數資料
型號： 28233-11
廠商： CONEXANT SYSTEMS
元件分類： 數字傳輸電路
英文描述： ATM Transmitter/Receiver with UTOPIA Interface
中文描述： TRANSCEIVER, PQFP160
封裝： PLASTIC, MQFP-160
文件頁數： 116/161頁
文件大?。?/td> 1832K
代理商： 28233-11
3.0 Registers
CN8223
3.7 Status Register Overview
ATM Transmitter/Receiver with UTOPIA Interface
3-30
Conexant
100046C
Set if the three LSBs of the K2 octet are set to
“
111
”
for five consecutive frames.
Table 3-12. STS-1,STS-3c, STM-1 LINE_STATUS Bit Definitions
Bit
Name
Description
15
Line FEBE Error
Set if any valid non-0 FEBE value (values 1
–
24) is detected in the M1 octet of the
STS-1/STS-3c/STM-1 overhead.
14
One-Second Count
Set if the one-second timer input is detected.
13
Signal Label Mismatch
Set if the received value in the C2 octet does not equal 0x13 for seven consecutive frames.
12
Path FERF Error
Set if a value of 9 is detected in the most significant nibble of the G1 octet of the
STS-1/STS-3c/STM-1 overhead.
11
Path FEBE Error
Set if any valid non-0 FEBE value (values 1
–
8) is detected in the most significant nibble of
the G1 octet of the STS-1/STS-3c/STM-1 overhead.
10
Summary BIP Error
Set if there is an error in any of the B1, B2, B3 BIP-8, or BIP-24 codes at the receiver.
9
Line FERF
Set if the three LSBs of the K2 octet are set to
“
110
”
for five consecutive frames.
8
LOC
Indicates that HEC cell delineation has been lost. Cell delineation is lost if seven consecutive
HEC errors occur at the current cell delineation position.
7
STS LOF 2
–
3
Set if STS LOF is high for three consecutive one-second latching signals (rising edge on
ONESECI).
6
STS LOF
Set when STS OOF is active for 24 consecutive SONET frames.
5
STS OOF
Set if four consecutive errored A1/A2 framing patterns are observed. For STS-3c/STM-1, the
pattern observed consists of the third A1 octet and the first A2 octet.
4
Path Yellow
Set if the path yellow bit in the G1 octet is set for 10 consecutive frames. The RDI qualifier
for this alarm can be observed in bits 8 and 9 of the CONFIG_5 register.
3
Path AIS
Set if H1 and H2 octets are all 1s for three consecutive frames.
2
Line AIS
1
STS LOP
Set if a valid pointer as defined in TR-NWT-000253 cannot be found in the H1/H2 pointer of
the STS-1/STS-3c/STM-1 frame.
0
LOS (Input)
Set if there is a LOS detected by the RXLOS~ input pin. For STS-3c/STM-1, the only source
of LOS is RXLOS~. Cells will continue to be output on the receive side until LOCD is
detected, which is about 6 or 7 cells. To stop output of cells immediately, connect RXLOS~
to RCV_HLD after inverting.
相關PDF資料
PDF描述
28C010TRPDB-12 150 x 32 pixel format, LED Backlight available
28C010TRT1DE-15 1 Megabit (128K x 8-Bit) EEPROM
28C010TRT1DE-20 1 Megabit (128K x 8-Bit) EEPROM
28C010TRT1FB-15 1 Megabit (128K x 8-Bit) EEPROM
28C010TRT1FB-20 1 Megabit (128K x 8-Bit) EEPROM
相關代理商/技術參數
參數描述
282332-2 制造商:TE Connectivity 功能描述:
282-333 制造商:WAGO Innovative Connections 功能描述:END PLATE RAIL MOUNTED TERMINAL BLOCK 制造商:WAGO 功能描述:END PLATE, RAIL MOUNTED TERMINAL BLOCK 制造商:WAGO Innovative Connections 功能描述:END PLATE, RAIL MOUNTED TERMINAL BLOCK; Series:282; Accessory Type:End Plate; For Use With:Rail Mounted Terminal Blocks; Color:Orange; Mounting Type:DIN Rail ;RoHS Compliant: Yes
2823337 功能描述:工業繼電器 ST-REL4-KG120/21-21 RoHS:否 制造商:TE Connectivity / Kilovac 觸點形式:1 Form A (SPST-NO) 觸點電流額定值: 線圈電壓:9 VDC to 36 VDC 線圈電阻:38 Ohms 線圈電流: 切換電壓: 安裝風格:Panel 觸點材料:Silver Palladium
282-334 制造商:WAGO Innovative Connections 功能描述:End Plate 2 mm Thick-Color Grey For Use With Rail Mounted Terminal Block 制造商:WAGO 功能描述:GREY END PLATE 制造商:WAGO Innovative Connections 功能描述:END PLATE, 2MM, GREY; Series:-; Accessory Type:End Plate; For Use With:Rail Mounted Terminal Blocks ;RoHS Compliant: Yes
282-334 制造商:WAGO Innovative Connections 功能描述:END PLATE 制造商:WAGO 功能描述:END PLATE
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*