參數資料
型號： R5F6418JADFE
元件分類： 微控制器/微處理器
英文描述： MICROCONTROLLER, PQFP176
封裝： 24 X 24 MM, 0.50 MM PITCH, PLASTIC, LQFP-176
文件頁數： 87/128頁
文件大?。?/td> 922K
代理商： R5F6418JADFE
61
ATmega48PA/88PA/168PA [DATASHEET]
9223F–AVR–04/14
13.2.2 EIMSK – External Interrupt Mask Register
Bit 7:2 – Reserved
These bits are unused bits in the Atmel ATmega48PA/88PA/168PA, and will always read as zero.
Bit 1 – INT1: External Interrupt Request 1 Enable
When the INT1 bit is set (one) and the I-bit in the status register (SREG) is set (one), the external pin interrupt is enabled.
The interrupt sense control1 bits 1/0 (ISC11 and ISC10) in the external interrupt control register A (EICRA) define whether
the external interrupt is activated on rising and/or falling edge of the INT1 pin or level sensed. Activity on the pin will cause an
interrupt request even if INT1 is configured as an output. The corresponding interrupt of external interrupt request 1 is
executed from the INT1 interrupt vector.
Bit 0 – INT0: External Interrupt Request 0 Enable
When the INT0 bit is set (one) and the I-bit in the status register (SREG) is set (one), the external pin interrupt is enabled.
The interrupt sense control0 bits 1/0 (ISC01 and ISC00) in the external interrupt control register A (EICRA) define whether
the external interrupt is activated on rising and/or falling edge of the INT0 pin or level sensed. Activity on the pin will cause an
interrupt request even if INT0 is configured as an output. The corresponding interrupt of external interrupt request 0 is
executed from the INT0 interrupt vector.
13.2.3 EIFR – External Interrupt Flag Register
Bit 7:2 – Reserved
These bits are unused bits in the Atmel ATmega48PA/88PA/168PA, and will always read as zero.
Bit 1 – INTF1: External Interrupt Flag 1
When an edge or logic change on the INT1 pin triggers an interrupt request, INTF1 becomes set (one). If the I-bit in SREG
and the INT1 bit in EIMSK are set (one), the MCU will jump to the corresponding interrupt vector. The flag is cleared when
the interrupt routine is executed. Alternatively, the flag can be cleared by writing a logical one to it. This flag is always cleared
when INT1 is configured as a level interrupt.
Bit 0 – INTF0: External Interrupt Flag 0
When an edge or logic change on the INT0 pin triggers an interrupt request, INTF0 becomes set (one). If the I-bit in SREG
and the INT0 bit in EIMSK are set (one), the MCU will jump to the corresponding interrupt vector. The flag is cleared when
the interrupt routine is executed. Alternatively, the flag can be cleared by writing a logical one to it. This flag is always cleared
when INT0 is configured as a level interrupt.
Bit
76543210
––––––
INT1
INT0
EIMSK
Read/Write
RRRRRR
R/W
Initial Value
00000000
Bit
76543210
––––––
INTF1
INTF0
EIFR
Read/Write
RRRRRR
R/W
Initial Value
00000000
相關PDF資料
PDF描述
R5F64200LFB 32-BIT, FLASH, 64 MHz, MICROCONTROLLER, PQFP100
R5F64200JFB 32-BIT, FLASH, 64 MHz, MICROCONTROLLER, PQFP100
R5F64201JFB 32-BIT, FLASH, 64 MHz, MICROCONTROLLER, PQFP100
R5F64201KFB 32-BIT, FLASH, 64 MHz, MICROCONTROLLER, PQFP100
R5F6420FLFB 32-BIT, FLASH, 64 MHz, MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
R5F6418JANFD 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:RENESAS MCU
R5F6418JANFE 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:RENESAS MCU
R5F6418JANFE_12 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:RENESAS MCU
R5F6418JAPFD 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:RENESAS MCU
R5F6418JAPFE 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:RENESAS MCU
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*