參數資料
型號: MT90866AG2
廠商: ZARLINK SEMICONDUCTOR INC
元件分類: 路由/交換
英文描述: Flexible 4 K x 2.4 K Channel Digital Switch with H.110 Interface and 2.4 K x 2.4 K Local Switch
中文描述: TELECOM, DIGITAL TIME SWITCH, PBGA344
封裝: 27 X 27 MM, LEAD FREE, PLASTIC, MS-034, BGA-344
文件頁數: 36/86頁
文件大?。?/td> 701K
代理商: MT90866AG2
MT90866
Data Sheet
36
Zarlink Semiconductor Inc.
These reference signal verifications include a complete loss or a large frequency shift of the selected reference
signal. When the reference signal returns to normal, the LOS_PRI and LOS_SEC signals will return to logic low.
17.6 State Machine Circuit
The State Machine handles the reference selection. Depending on REF_SEL and LOS signals (selection between
FAIL_PRI and PRI_LOS and between FAIL_SEC and SEC_LOS), the state machine selects PRI_REF or
SEC_REF as the current input reference and dictates the PLL Circuit mode: Normal or Holdover Mode. In the
Normal Mode, the DPLL output clocks are locked to the selected input reference (PRI_REF or SEC_REF). In the
Holdover Mode, the DPLL clocks retain the phase and frequency values they had 32 to 64 ms prior to moving from
the Normal to the Holdover Mode. When going from the Holdover to the Normal Mode, the State Machine activates
the MTIE circuit and goes through the states MTIE PRI or MTIE SEC to prevent a phase shift of the output clocks
during the DPLL reference switch (from PRI_REF to SEC_REF and vice versa). The state diagram is given in
Figure 14, "State Machine Diagram" on page 36.
Figure 14 - State Machine Diagram
18.0 Phase Locked Loop (PLL) Circuit
As shown in Figure 15, "Block Diagram of the PLL Module" on page 37, the PLL module consists of a Skew Control,
Maximum Time Interval Error (MTIE), Phase Detector, Phase Offset Adder, Phase Slope Limiter, Loop Filter,
Digitally Controlled Oscillator (DCO), Divider and Frequency Select MUX modules.
Holdover
PRI
Holdover
SEC
MTIE
SEC
Normal
PRI
Normal
SEC
XXX = {LOS_PRI, LOS_SEC, REF_SEL}
1XX or X01
0X0 or 011
0x0 or
011
100 or x01
1X0 or X01
100 or X01
0X0 or X1X
100 or
X01
0x0 or 011
MTIE
PRI
RESET Pin = 0
and xx0
RESET Pin = 0
and xx1
4
0
3
7
6
2
X11
0x0 or
相關PDF資料
PDF描述
MT90869 Flexible 16K Digital Switch (F16kDX)
MT90869AG Flexible 16K Digital Switch (F16kDX)
MT90870 Flexible 12 k Digital Switch (F12kDX)
MT90871AV Flexible 8K Digital Switch (F8KDX)
MT90871 Flexible 8K Digital Switch (F8KDX)
相關代理商/技術參數
參數描述
MT90866AL 制造商:MITEL 制造商全稱:Mitel Networks Corporation 功能描述:WAN Access Switch
MT90868AG 制造商:Microsemi Corporation 功能描述:SWIT FABRIC 32KX8K/8KX8K/1K X 1K 1.8V/3.3V 466BGA - Trays
MT90868AG2 制造商:Microsemi Corporation 功能描述:SWIT FABRIC 32KX8K/8KX8K/1K X 1K 1.8V/3.3V 466BGA - Trays
MT90869 制造商:ZARLINK 制造商全稱:Zarlink Semiconductor Inc 功能描述:Flexible 16K Digital Switch (F16kDX)
MT90869AG 制造商:Microsemi Corporation 功能描述:SWIT FABRIC 16KX16K/8KX8K 1.8V/3.3V 272BGA - Trays 制造商:MICROSEMI CONSUMER MEDICAL PRODUCT GROUP 功能描述:IC DGTL SWITCH F16KDX 272PBGA 制造商:Microsemi Corporation 功能描述:IC DGTL SWITCH F16KDX 272PBGA