參數資料
型號： TSB43AA82PGE
廠商： TEXAS INSTRUMENTS INC
元件分類： 微控制器/微處理器
英文描述： 2 CHANNEL(S), 400M bps, SERIAL COMM CONTROLLER, PQFP144
封裝： PLASTIC, QFP-144
文件頁數： 108/146頁
文件大小： 770K
代理商： TSB43AA82PGE
338
3.4.48 Log/ROM Control Register at F8h
This register defaults to 0000 0000h and is unaffected by a bus reset.
3.4.48.1 Log/ROM Control Register at F8h—XLOG (bit 16 at F8h) = 0
BITS
ACRONYM
DIR
DESCRIPTION
0
LogATF
R/W
Record packets transmitted from the ATF in the LOG. When LogATF is set to 1, packets transmitted from
the ATF are recorded in the LOG. When LogATF is set to 0, packets transmitted from the ATF are not
recorded.
1
LogARF
R/W
Record packets written to the ARF in the LOG . When LogARF is set to 1, packets written to the ARF are
recorded in the LOG. When LogARF is set to 0, packets written to the ARF are not recorded.
2
LogMAgnt
R/W
Record packets accessed by management agent in the LOG. When LogMAgnt is set to 1, packets
accessed by the management agent are recorded in the LOG. When LogMAgnt is set to 0, packets written
to the MRF are not recorded.
3
LogMTQ
R/W
Record packets transmitted from the MTQ in the LOG. When LogMTQ is set to 1, packets transmitted
from the MTQ are recorded in the LOG. When LogMTQ is set to 0, packets transmitted from the MTQ are
not recorded.
4
LogMRF
R/W
Record packets written to the MRF in the LOG. When LogMRF is set to 1, packets written to the MRF are
recorded in the LOG. When LogMRF is set to 0, packets written to the MRF are not recorded.
5
LogAgnt
R/W
Record packets accessed by the command block agent in the LOG. When LogAgnt is set to 1, packets
accessed by the command block agent are recorded in the LOG. When LogAgnt is set to 0, packets
written to the CRF are not recorded.
6
LogCTQ
R/W
Record packets transmitted from the CTQ in the LOG. When LogCTQ is set to 1, packets transmitted from
the CTQ are recorded in the LOG. When LogCTQ is set to 0, packets transmitted from the CTQ are not
recorded.
7
LogCRF
R/W
Record packets written to the CRF in the LOG. When LogCRF is set to 1, packets written to CRF are
recorded in the LOG. When LogCRF is set to 0, packets written to the CRF are not recorded.
8
LogDTFRq
R/W
Record write request packets transmitted from the DTF in the LOG. When LogDTFRq is set to 1, write
request packets transmitted from the DTF are recorded in the LOG. When LogDTFRq is set to 0, they are
not recorded.
9
LogDTFRs
R/W
Record write response packets received by the DTF in the LOG. When LogDTFRs is set to 1, write
response packets received by the DTF are recorded in the LOG. When LogDTFRs is set to 0, they are not
recorded.
10
LogDRFRq
R/W
Record read request packets transmitted by the DRF in the LOG. When LogDRFRq is set to 1, read
request packets transmitted by the DRF are recorded in the LOG. When LogDRFRq is set to 0, they are
not recorded.
11
LogDRFRs
R/W
Record read response packets received by the DRF in the LOG. When LogDRFRs is set to 1, read
response packets received by the DRF are recorded into the LOG. When LogDRFRs is set to 0, they are
not recorded.
12
LogARROM
R/W
Record auto-response packet from the configuration ROM in the LOG. When LogARROM is set to 1,
auto-response packets including data read from configuration ROM are recorded in the LOG. When
LogARROM is set to 0, they are not recorded.
13
LogRetry
N/A
Record retry packet. When LogRetry is set to 1, retry packets are recorded in the LOG. When LogRetry is
set to 0, they are not recorded.
14
ShortLog
R/W
Short format log. When ShortLog is set to 1, packets are recorded in the LOG in the long format. When
ShortLog is set to 0, packets are recorded in the LOG in the short format.
15
LogClr
S/C
Log clear control bit. When LogClr is set to 1, the LOG is cleared.
16
XLOG
R/W
Select LOG data or ConfigROM data. When XLOG is set to 1, the data read from the LOG data (FCh) is
ConfigROM data. When XLOG is set to 0, the data read from LOG data (FCh) is LOG data. Note: After
XLOG is set to 0, the LOG is cleared using the LogClr bit.
17
ROMValid
R/W
Configuration ROM valid. When ROMValid is set to 1, the data in configuration ROM is valid. The receiver
returns Ack_pending for all quadlet read requests addressed to this configuration ROM and the
respective quadlet read response packets are transmitted automatically. When ROMValid is set to 0, the
data in the configuration ROM is invalid. The receiver returns Ack_Tardy for all quadlet read requests
addressed to this configuration ROM.
18
LogCD
R/O
Log control bit. When the first or the last quadlet of a packet is read from LOG data (FCh), LogCD is 1.
Otherwise, LogCD is 0.
相關PDF資料
PDF描述
TSB43AA82GGW 2 CHANNEL(S), 400M bps, SERIAL COMM CONTROLLER, PBGA176
TSB43DA42GHCR PCI BUS CONTROLLER, PBGA196
TSB500SK02 30 A, BARRIER STRIP TERMINAL BLOCK, 1 ROW, 1 DECK
TSB500SK10MDS 30 A, BARRIER STRIP TERMINAL BLOCK, 1 ROW, 1 DECK
TSB5000331DS 30 A, BARRIER STRIP TERMINAL BLOCK, 1 ROW, 1 DECK
相關代理商/技術參數
參數描述
TSB43AA82PGEG4 功能描述:1394 接口集成電路 2Port Hi Per Int Phy & Link Layer Chip RoHS:否 制造商:Texas Instruments 類型:Link Layer Controller 工作電源電壓: 封裝 / 箱體:LQFP 封裝:Tray
TSB43AB21 制造商:TI 制造商全稱:Texas Instruments 功能描述:INTERGRATED 1394A-2000 OHCI PHY LINK-LAYER CONTROLLER
TSB43AB21A 制造商:TI 制造商全稱:Texas Instruments 功能描述:Integrated 1394a-2000 OHCI PHY/Link-Layer Controller
TSB43AB21A-EP 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Military Enhanced Plastic Integrated 1394a-2000 OCHI pHY/Link-Layer Controller
TSB43AB21AI 制造商:TI 制造商全稱:Texas Instruments 功能描述:Integrated 1394a-2000 OHCI PHY/Link-Layer Controller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*