![](http://datasheet.mmic.net.cn/110000/IXF1010_datasheet_3494295/IXF1010_95.png)
10-Port 100/1000 Mbps Ethernet MAC — IXF1010
Preliminary Datasheet
95
Document #: 249839
Revision #: 001
Rev. Date: April 29, 2002
6.5.5
Global RX Block Register Overview
include the RX FIFO High and Low watermarks.
Table 71. RX FIFO High Watermark Ports 0 to 9 Registers (Addr: 0x580 - 0x589)
Name2
Description
Address
Type1
Default
RX FIFO High
Watermark Port 0
High watermark for RX FIFO port 0. The default
value is 1856 bytes. When the amount of data
stored in the FIFO exceeds this value, a flow
control command is sent to the corresponding TX
MAC.
0x580
R/W
0x00000740
RX FIFO High
Watermark Port 1
High watermark for RX FIFO port 1. The default
value is 1856 bytes. When the amount of data
stored in the FIFO exceeds this value, a flow
control command is sent to the corresponding TX
MAC.
0x581
R/W
0x00000740
RX FIFO High
Watermark Port 2
High watermark for RX FIFO port 2. The default
value is 1856 bytes. When the amount of data
stored in the FIFO exceeds this value, a flow
control command is sent to the corresponding TX
MAC.
0x582
R/W
0x00000740
RX FIFO High
Watermark Port 3
High watermark for RX FIFO port 3. The default
value is 1856 bytes. When the amount of data
stored in the FIFO exceeds this value, a flow
control command is sent to the corresponding TX
MAC.
0x583
R/W
0x00000740
RX FIFO High
Watermark Port 4
High watermark for RX FIFO port 4. The default
value is 1856 bytes. When the amount of data
stored in the FIFO exceeds this value, a flow
control command is sent to the corresponding TX
MAC.
0x584
R/W
0x00000740
RX FIFO High
Watermark Port 5
High watermark for RX FIFO port 5. The default
value is 1856 bytes. When the amount of data
stored in the FIFO exceeds this value, a flow
control command is sent to the corresponding TX
MAC.
0x585
R/W
0x00000740
RX FIFO High
Watermark Port 6
High watermark for RX FIFO port 6. The default
value is 1856 bytes. When the amount of data
stored in the FIFO exceeds this value, a flow
control command is sent to the corresponding TX
MAC.
0x586
R/W
0x00000740
1. RO = Read Only; RR = Clear on Read; W = Write; R/W = Read/Write
2. For all RX FIFO High Watermark Registers, the following bit definitions apply to all ports (0:9):
Bits 31:15 - Reserved and RO.
Bits 14:0 - Described above.