
Copyright and Disclaimer
Copyright International Business Machines Corporation 1999, 2000
All Rights Reserved
Printed in the United States of America July 2000
The following are trademarks of
International Business Machines Corporation in the United States, or other countries,
or both.
IBM
IBM Logo
PowerPC
Other company, product and service names may be trademarks or service marks of others.
All information contained in this document is subject to change without notice. The products described in this docu-
ment are NOT intended for use in implantation or other life support applications where malfunction may result in injury
or death to persons. The information contained in this document does not affect or change IBM product specifications
or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellec-
tual property rights of IBM or third parties. All information contained in this document was obtained in specific environ-
ments, and is presented as an illustration. The results obtained in other operating environments may vary.
While the information contained herein is believed to be accurate, such information is preliminary, and should not be
relied upon for accuracy or completeness, and no representations or warranties of accuracy or completeness are
made.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS. In no event will IBM
be liable for damages arising directly or indirectly from any use of the information contained in this document.
IBM Microelectronics Division
1580 Route 52, Bldg. 504
Hopewell Junction,
NY 12533-6351
The IBM home page can be found at
http://www.ibm.com
The IBM Microelectronics Division home page
can be found at http://www.chips.ibm.com
pnr261_title.fm.06
August 14, 2000
Note:
This document contains information on products in the sampling and/or initial production phases of
development. This information is subject to change without notice. Verify with your IBM field applications engi-
neer that you have the latest version of this document before finalizing a design.