參數資料
型號： NS32FV16-25
廠商： NATIONAL SEMICONDUCTOR CORP
元件分類： 數字信號處理
英文描述： Advanced Imaging/Communication Signal Processors
中文描述： 16-BIT, 50 MHz, MIXED DSP, PQCC68
封裝： PLASTIC, LCC-68
文件頁數： 11/102頁
文件大?。?/td> 1053K
代理商： NS32FV16-25
2.0 Architectural Description
(Continued)
EXTDExternal Memory Reference Control Register
The format of the external memory reference control regis-
ter is shown in Figure 2-11.
15
1
0
Reserved
HOLD
FIGURE 2-11. EXT Register Format
The EXT register controls external references. The com-
mand-list execution unit checks the value of EXT.HOLD be-
fore each external memory reference. When EXT.HOLD is
‘‘0’’, external memory references are allowed. When
EXT.HOLD is ‘‘1’’, and external memory references are re-
quested, the execution of the command list will stop until
EXT.HOLD is ‘‘0’’. Upon reset, and whenever the ABORT
register is written, EXT.HOLD is cleared to ‘‘0’’. The EXT
register can be read or written by the core.
CLSTATDCommand-List Execution Status Register
The format of the command-list execution status register is
shown in Figure 2-12.
15
1
0
Reserved
RUN
FIGURE 2-12. CLSTAT Register Format
The CLSTAT register displays the current status of the exe-
cution of the command list. When the command-list execu-
tion is idle, CLSTAT.RUN is ‘‘0’’, and when it is active,
CLSTAT.RUN is ‘‘1’’. Upon reset, the CLSTAT register is
cleared to ‘‘0’’. It can only be read, and only by the core.
DSPINT,
Registers
DSPMASK,
NMISTATDInterrupt
Control
The format of DSPINT and DSPMASK is shown in Figure
2-13.
15
1
0
Reserved
HALT
FIGURE 2-13. DSPINT and DSPMASK Register Format
The DSPINT register holds the current status of interrupt
requests. Whenever execution of the command list is
stopped, the DSPINT.HALT bit is set to ‘‘1’’. The DSPINT is
a read only register. It is cleared to ‘‘0’’ whenever it is read,
whenever the ABORT register is written, and upon reset.
The DSPMASK register is used to mask the DSPINT. HALT
flag. An interrupt request is transferred to the interrupt logic
of the IOUT output pin whenever the DSPINT.HALT bit is
set to ‘‘1’’, and the DSPMASK.HALT bit is unmasked (set to
‘‘1’’). See Section 4.0 for the functionality of IOUT.
DSPMASK can be read and written by the core. Upon reset,
and whenever the ABORT register is written, all the bits in
DSPMASK are cleared to ‘‘0’’.
The format of the NMISTAT register is shown inFigure 2-14.
15
3
2
1
0
Reserved
ERR
UND
EXT
FIGURE 2-14. NMISTAT Register Format
The NMISTAT holds the status of the current pending Non-
Maskable Interrupt (NMI) requests.
Whenever the core attempts to access the DSPM address
space while the CLSTAT.RUN bit is ‘‘1’’ (except for access-
es to the CLSTAT, EXT, DSPINT, NMISTAT, DSPMASK,
and ABORT registers) NMISTAT.ERR is set to ‘‘1’’.
Whenever there is an attempt to execute a DBPT instruc-
tion, or a reserved DSPM instruction (Section 3.4), the
NMISTAT.UND bit is set to ‘‘1’’.
When a high to low transition is detected on the NMI input
pin, NMISTAT.EXT bit is set to ‘‘1’’.
When one of the bits in NMISTAT is set to ‘‘1’’, an NMI
request to the core is issued.
The NMISTAT register is cleared to 0 upon reset, and each
time its contents are read.
When one of the bits in NMISTAT is set to 1, an NMI occurs.
The NMI handler can read the NMISTAT register to deter-
mine the source of the interrupt. Note that since NMIs may
be nested, it is possible that a second NMI handler (invoked
while the previous handler has not yet exited) will read and
handle more than one set bit in NMISTAT. Since the read
operation clears the register, the interrupted handler may
find that no bits are set.
2.2 MEMORY ORGANIZATION
The main memory of the NS32FX164 is a uniform linear
address space. Memory locations are numbered sequential-
ly starting at zero and ending at 2
24
b
1. The number speci-
fying a memory location is called an address. The contents
of each memory location is a byte consisting of eight bits.
Unless otherwise noted, diagrams in this document show
data stored in memory with the lowest address on the right
and the highest address on the left. Also, when data is
shown vertically, the lowest address is at the top of a dia-
gram and the highest address at the bottom of the diagram.
When bits are numbered in a diagram, the least significant
bit is given the number zero, and is shown at the right of the
diagram. Bits are numbered in increasing significance and
toward the left.
7
0
A
Byte at Address A
Two contiguous bytes are called a word. Except where not-
ed, the least significant byte of a word is stored at the lower
address, and the most significant byte of the word is stored
at the next higher address. In memory, the address of a
word is the address of its least significant byte, and a word
may start at any address.
15
8
7
0
A
a
1
A
MSB
LSB
Word at Address A
Two contiguous words are called a double-word. Except
where noted, the least significant word of a double-word is
stored at the lowest address and the most significant word
of the double-word is stored at the address two higher. In
memory, the address of a double-word is the address of its
least significant byte, and a double-word may start at any
address.
31
24
23
16
15
8
7
0
A
a
3
A
a
2
A
a
1
A
MSB
LSB
Double Word at Address A
11
相關PDF資料
PDF描述
NS32FX164-25 Advanced Imaging/Communication Signal Processors(高級圖象/通訊信號處理器)
NS32FX161-15 Advanced Imaging/Communication Signal Processors(高級圖象/通訊信號處理器)
NS32FX161-20 Advanced Imaging/Communication Signal Processors(高級圖象/通訊信號處理器)
NS32FX164V-15 Advanced Imaging/Communication Signal Processors
NS32FX164V-20 Advanced Imaging/Communication Signal Processors
相關代理商/技術參數
參數描述
NS32FX100 制造商:未知廠家 制造商全稱:未知廠家 功能描述:
NS32FX100-15 制造商:NSC 制造商全稱:National Semiconductor 功能描述:System Controller
NS32FX100VF 制造商:NSC 制造商全稱:National Semiconductor 功能描述:System Controller
NS32FX16 制造商:未知廠家 制造商全稱:未知廠家 功能描述:
NS32FX161 制造商:未知廠家 制造商全稱:未知廠家 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*