參數資料
型號： HC05PL4GRS
英文描述： 68HC05PL4A. 68HC05PL4B. 68HC705PL4B General Release Specification
中文描述： 68HC05PL4A。 68HC05PL4B。 68HC705PL4B一般版本規范
文件頁數： 22/98頁
文件大小： 1004K
代理商： HC05PL4GRS
GENERAL RELEASE SPECIFICATION
April 30, 1998
MOTOROLA
3-2
CENTRAL PROCESSING UNIT
For More Information On This Product,
Go to: www.freescale.com
MC68HC05PL4
REV 2.0
3.2
ACCUMULATOR (A)
The accumulator is a general purpose 8-bit register as shown in
Figure 3-1
. The
CPU uses the accumulator to hold operands and results of arithmetic calculations
or non-arithmetic operations. The accumulator is not affected by a reset of the
device.
3.3
INDEX REGISTER (X)
The index register shown in
Figure 3-1
is an 8-bit register that can perform two
functions:
Indexed addressing
Temporary storage
In indexed addressing with no offset, the index register contains the low byte of
the operand address, and the high byte is assumed to be $00. In indexed
addressing with an 8-bit offset, the CPU finds the operand address by adding the
index register content to an 8-bit immediate value. In indexed addressing with a
16-bit offset, the CPU finds the operand address by adding the index register
content to a 16-bit immediate value.
The index register can also serve as an auxiliary accumulator for temporary
storage. The index register is not affected by a reset of the device.
3.4
STACK POINTER (SP)
The stack pointer shown in
Figure 3-1
is a 16-bit register. In MCU devices with
memory space less than 64k-bytes the unimplemented upper address lines are
ignored. The stack pointer contains the address of the next free location on the
stack. During a reset or the reset stack pointer (RSP) instruction, the stack pointer
is set to $00FF. The stack pointer is then decremented as data is pushed onto the
stack and incremented as data is pulled off the stack.
When accessing memory, the ten most significant bits are permanently set to
0000000011. The six least significant register bits are appended to these ten fixed
bits to produce an address within the range of $00FF to $00C0. Subroutines and
interrupts may use up to 64($C0) locations. If 64 locations are exceeded, the
stack pointer wraps around and overwrites the previously stored information. A
subroutine call occupies two locations on the stack and an interrupt uses five
locations.
3.5
PROGRAM COUNTER (PC)
The program counter shown in
Figure 3-1
is a 16-bit register. In MCU devices
with memory space less than 64k-bytes the unimplemented upper address lines
are ignored. The program counter contains the address of the next instruction or
operand to be fetched.
F
Freescale Semiconductor, Inc.
n
.
相關PDF資料
PDF描述
HC05V7GRS 68HC05V7 General Release Specification
HC05 Bipolar Transistor; Transistor Polarity:Dual P Channel; Power Dissipation:20W; DC Current Gain Min (hfe):25; Collector Current:1A; DC Current Gain Max (hfe):200; Power (Ptot):20W
HC1-5502A-7 Subscriber Line Interface Circuit
HC4P-5502A-7 Subscriber Line Interface Circuit
HC1062A Low Voltage Telephone Speech Transmission Circuit / High/Low Level Mute
相關代理商/技術參數
參數描述
HC05V7GRS 制造商:未知廠家 制造商全稱:未知廠家 功能描述:68HC05V7 General Release Specification
HC060WE1DS038B 制造商:TE Connectivity 功能描述:EC7174-000
HC060YW1DS038B 制造商:TE Connectivity 功能描述:EC7207-000
HC06B05000J0G 制造商:FCI 功能描述:OEM ITEM 505-5BNF-SPRING CLAMP SYSTEM
HC08 制造商:Texas Instruments 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*