參數資料
型號： 28222-13
廠商： Conexant Systems, Inc.
英文描述： ATM Transmitter/Receiver with UTOPIA Interface
中文描述： 自動柜員機發射機/接收機的UTOPIA接口
文件頁數： 82/161頁
文件大?。?/td> 1832K
代理商： 28222-13
G.751 E3 N bit
G.832 E3 and E4 GC octet
STS-1/STS-3c/STM-1 D1, D2, D3 octet data link
2.0 Functional Description
CN8223
2.8 FEAC Channel and HDLC Data Link Programming
ATM Transmitter/Receiver with UTOPIA Interface
2-48
Conexant
100046C
2.8.3.4 Transmitter
Control Example
This example shows the sequence necessary to transmit a 10-byte hex message
starting in the low half of the transmit buffer. With the transmitter in the idle state,
the processor executes the following sequence:
write bytes 1 and 2 to address 0x5C
write bytes 3 and 4 to address 0x5D
write 19 to address 0x60 (bytes = 3, send message = 1)
at TX Interrupt:
write bytes 5 and 6 to address 0x5E
write bytes 7 and 8 to address 0x5F
write 39 to address 0x60 (bytes = 7, send message = 1)
at TX Interrupt:
write bytes 9 and 10 to address 0x5C
write 0B to address 0x60 (bytes = 1, send message = 1,
send FCS = 1)at TX Interrupt:
write 00 to address 0x60 (send message = 0, send FCS = 0
2.8.4 HDLC Data Link Receiver
The HDLC data link receiver is under the control of the received data stream only.
The receiver interrupt is under the control of Enable Receive Data Link Interrupt
[bit 7] in DL_CTRL_STAT [0x60]. You must enable this interrupt by setting this
bit for receiver interrupts to appear on the DL_INT output and for proper
interaction with the processor. The HDLC data link capability is present in the
following formats:
DS3 Terminal Data Link C bits
The data link bits are provided to the receiver circuitry at all times. Therefore,
when the LINE_STATUS register [0x38] indicates that alarms are being received
that render the data link information useless, you can disable the receive data link
interrupt to prevent excessive or spurious interrupts to the processor. Receiver
status is monitored via Receiver Interrupt [bit 15] in DL_CTRL_STAT and via
the receiver status bits in that register (bits 13-8). When a receive data link
interrupt is generated on DL_INT, the Receiver Interrupt bit is set. If this bit is
observed upon reading the DL_CTRL_STAT register, then the status obtained
from bits 13
–
8 indicates the receiver status that caused the interrupt.
The DL_CTRL_STAT register contains three status bits and a three-bit buffer
pointer. The status bits are Abort Flag Received [bit 8], Bad FCS [bit 9], and Idle
Code Received [bit 10]. The 3-bit buffer pointer RxBytes[2:0] [bits 13
–
11] is
used to point to locations in the 8-byte (organized as four 16-bit words)
RX_DL_BUFFER. This buffer is located at addresses 0x58 through 0x5B. The
buffer pointer indicates the last location written by the data link receiver. Byte 0
of the buffer is the least significant byte of 0x58, byte 1 is the most significant
byte of 0x58, byte 2 is the least significant byte of 0x59, etc.
相關PDF資料
PDF描述
28222-14 ATM Transmitter/Receiver with UTOPIA Interface
28233-11 ATM Transmitter/Receiver with UTOPIA Interface
28C010TRPDB-12 150 x 32 pixel format, LED Backlight available
28C010TRT1DE-15 1 Megabit (128K x 8-Bit) EEPROM
28C010TRT1DE-20 1 Megabit (128K x 8-Bit) EEPROM
相關代理商/技術參數
參數描述
28222-14 制造商:CONEXANT 制造商全稱:CONEXANT 功能描述:ATM Transmitter/Receiver with UTOPIA Interface
282222-003 制造商:TE Connectivity 功能描述:81044/12-16-2 - Cable Rools/Shrink Tubing
282223-003 制造商:TE Connectivity 功能描述:81044/12-16-3 - Cable Rools/Shrink Tubing
282224-003 制造商:TE Connectivity 功能描述:81044/12-16-4 - Cable Rools/Shrink Tubing
282224-1 功能描述:汽車連接器 ECONOSEAL RCPT CONT .5MM RoHS:否 制造商:Amphenol SINE Systems 產品:Contacts 系列:ATP 位置數量: 型式:Female 安裝風格: 端接類型: 觸點電鍍:Nickel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*