參數資料
型號： 28222-13
廠商： Conexant Systems, Inc.
英文描述： ATM Transmitter/Receiver with UTOPIA Interface
中文描述： 自動柜員機發射機/接收機的UTOPIA接口
文件頁數： 62/161頁
文件大?。?/td> 1832K
代理商： 28222-13
cleared by the cell generation circuitry after the idle cell has been transmitted or if
a cell from another port is selected by the priority control. The microprocessor
can poll this bit to determine when the idle cell insertion has been completed.
Idle cells are automatically generated when no transmit port is active. The
header for idle cells is obtained from the TX_IDLE_xx registers, and the HEC is
automatically calculated. The payload for idle cells is obtained from the
IDLE_PAY register [0x2A]. This data octet is inserted in all octet positions of the
idle cell payload. The CRC-10 can be inserted if required by setting Disable
Payload CRC of CELL_GEN_x to zero.
2.0 Functional Description
CN8223
2.6 ATM Cell Processing
ATM Transmitter/Receiver with UTOPIA Interface
2-28
Conexant
100046C
Disable HEC [bit 9] and Disable Payload CRC [bit 10] in the CELL_GEN_x
registers [0x04
–
0x07], disable the field generation and allow the existing field to
pass. Error HEC [bit 11] and Error Payload CRC [bit 12] force a single error
occurrence in the generated field. The Error functions are cleared after the error
is generated. This allows the microprocessor to easily generate a specific number
of errors. The error pattern programmed in the TXFEAC_ERRPAT register
[0x03] is used with the Error HEC control to generate a specific number of HEC
errors for checking receiver error correction/detection circuitry.
The Error Payload CRC bit inserts 4-bit errors into the payload CRC field.
The Inhibit Single Cell Generation [bit 13] field in CELL_GEN_x, inhibits cell
transmission from the port for a single cell interval. A single idle cell (with header
contents as defined in the Transmit Idle Header Register [0x0A
–
0x0B] and
payload set to all 0s) is transmitted in place of a data cell from this port at the next
cell interval
if
the priority control tries to obtain a cell from this port. This bit is
2.6.1.2 Cell Generation
Status and Status
Interrupts for Transmit
A per-port count of cells transmitted is maintained in the CELL_SENT_CNTx
counters [0x4E
–
0x51] for each port. These counters can be programmed to cause
an interrupt in the CELL_STATUS register [0x3B] by setting enable bits in the
EN_CELL_INT register 0x30]. The interrupt clears when CELL_STATUS is
read. If the counter interrupt is not enabled, the counter stops at its maximum
value of 65,535. If the interrupt is enabled, the counter interrupts on
“
roll over
”
and continues counting. The counter clears when it is read.
Table 2-18. Overhead Field Locations
Overhead Field
Source
Cell Header
Header Register TX_HDR or FIFO input
Header Error Control
HEC Generation Circuit or FIFO input
Segment Type
FIFO Input
Sequence Count
FIFO Input
Length Field
FIFO Input
Payload CRC
Payload CRC Generation Circuit or FIFO Input
相關PDF資料
PDF描述
28222-14 ATM Transmitter/Receiver with UTOPIA Interface
28233-11 ATM Transmitter/Receiver with UTOPIA Interface
28C010TRPDB-12 150 x 32 pixel format, LED Backlight available
28C010TRT1DE-15 1 Megabit (128K x 8-Bit) EEPROM
28C010TRT1DE-20 1 Megabit (128K x 8-Bit) EEPROM
相關代理商/技術參數
參數描述
28222-14 制造商:CONEXANT 制造商全稱:CONEXANT 功能描述:ATM Transmitter/Receiver with UTOPIA Interface
282222-003 制造商:TE Connectivity 功能描述:81044/12-16-2 - Cable Rools/Shrink Tubing
282223-003 制造商:TE Connectivity 功能描述:81044/12-16-3 - Cable Rools/Shrink Tubing
282224-003 制造商:TE Connectivity 功能描述:81044/12-16-4 - Cable Rools/Shrink Tubing
282224-1 功能描述:汽車連接器 ECONOSEAL RCPT CONT .5MM RoHS:否 制造商:Amphenol SINE Systems 產品:Contacts 系列:ATP 位置數量: 型式:Female 安裝風格: 端接類型: 觸點電鍍:Nickel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*