參數資料
型號： STLC5411
廠商： 意法半導體
英文描述： 2B1Q U Interface Device(2BIQ U接口裝置)
中文描述： 2B1Q U接口設備（2BIQ ü接口裝置）
文件頁數： 44/72頁
文件大?。?/td> 738K
代理商： STLC5411
RR = 1:
UID
with
equipment. ”LT” or ”NT” behaviour is
selected by means of bit NTS. BP1
and BP2 break-points should be set
equal one too. See state matrix for the
detailed behaviour of UID in this mode
of operation.
activation/deactivation complies
the
requirements for
repetor
Configuration register 3 (CR3)
After reset: 00H
LB1
LB2
LBD
DB1
DB2
DBD
TLB
T15D
LB1, LB2, LBD
Line sideLoopbackselect.
When set high they turn each individual B1, B2,
or D channel from the Line receive input to the
Line transmit output. They may be set separately
or together. The loopback is operated close to Bx
and Br (or Dx and Dr if the D port is selected).
Theseloop backs ensureschannels integrity.
DB1, DB2, DBD
Digital side Channel Loopback
select.
When set high they turn each individual B1, B2,
or D channel from the Digital Interface receive in-
put to the Digital Interface transmit output. They
may be set separately or together. The loopback
is operated close to Bx and Br (or Dx and Dr if D
port selected). These loop backs ensures chan-
nels integrity whatever the selected format or as-
signed channelstime slot.
TLB
TransparentLoopbackselect
TLB = 0: Digital loopbacks are non transparent.
When line side loopback is set, data
transmitted onto the digital interface is
forced to
one.
loopback is set, data transmitted onto
the line is forced to 1 in NT mode and
to 0 in LT mode.
TLB = 1: 2B+D
is
transparently
through the UID.
T15D
Timer 15 second disabled
When
digital
side
transferred
T15D = 0: On-chip 15 second timer (timer 4 or 5
of ANSI standard) is enabled and
ensure full reset of the activation
procedure
synchronization of the line within 15
second.
T15D = 1: On-chip 15 second timer is disabled.
This means for instance that UID may
attempt to synchronize forever.
in
case
of
non
Configuration register 4 (CR4)
After reset: E0H
EB1
EB2
ED
FFIT
ESFr CTLIO MOB
CTC
EB1
B1 channel Enabling
EB1 = 1: Selected B1 channel time-slot on the
DSI/GCI interface is enabled. Note that
transparency of B1 channel remains
under control of the activation state
machine and the ETC bit in CR2.
EB1 = 0: Selected B1 channel time-slot on the
DSI/GCIinterface is disabled:Br output
remains in high impedance state and
data on Bx input is ignored. Ones (NT)
or zeroes (LT) are transmitted on the
line.
EB2
B2 channel Enabling Identical to EB1 bit but
for B2 channel.
ED
D channel enabling identical to EB1 but for D
channel on Bx/Br pin or DX/Dr pin depending on
DEN bit inCR2 register.
FFIT
FIFOs interrupt.
FFIT = 1: overflow or underflow of the TXFIFO
and RXFIFO are reported in STATUS
register. An interrupt is generated in
MW mode, a MONITOR message is
automaticallysent in GCI mode.
FFIT = 0: No interrupt or message is generated
when FIFOs overflow or underflow.
ESFr
EnableSFSr onpin25
ESFr = 0:LSD open drain output is selected on
pin 25.
ESFr = 1:SFSr output is selectedon pin 25.
CTLIO
Control IO (significant in GCI mode only)
CTLIO = 1: The input pins configurated via CR5
register generate a message on
every change even if the UID is
powered down in master mode; that
is to say UID is able to wake up
itself, to provide the clocks, to sends
the message. After that UID is
automatically powered down except
if a PUPcommand is sent to it.
CTLIO = 0: In master mode and powered down,
the UID does not react to a input pin
change.
MOB
Mask Overhead Bits.
MOB = 0: No Maskon overheadbit interrupts.
STLC5411
44/72
相關PDF資料
PDF描述
STLC5412 2B1Q U INTERFACE DEVICE ENHANCED WITH DECT MODE
STLC5412FN 2B1Q U INTERFACE DEVICE ENHANCED WITH DECT MODE
STLC5412P 2B1Q U INTERFACE DEVICE ENHANCED WITH DECT MODE
STLC5444 Quad Feed Power Supply(ISDN四饋電電源)
STLC5460 Line Card Interface Controller(線路卡片接口控制器)
相關代理商/技術參數
參數描述
STLC5411CJ 制造商:未知廠家 制造商全稱:未知廠家 功能描述:ISDN Line Interface
STLC5411FN 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:2B1Q U INTERFACE DEVICE
STLC5411P 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:2B1Q U INTERFACE DEVICE
STLC5412 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:2B1Q U INTERFACE DEVICE ENHANCED WITH DECT MODE
STLC5412FN 制造商:STMICROELECTRONICS 制造商全稱:STMicroelectronics 功能描述:2B1Q U INTERFACE DEVICE ENHANCED WITH DECT MODE
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*