參數資料
型號： M68HC16Y1CFC
廠商： MOTOROLA INC
元件分類： 微控制器/微處理器
英文描述： 16-BIT, MROM, MICROCONTROLLER, PQFP16
封裝： QFP-160
文件頁數： 5/138頁
文件大?。?/td> 784K
代理商： M68HC16Y1CFC
MOTOROLA
MC68HC16Y1
102
MC68HC16Y1TS/D
7.1.1 MCCI Global Registers
Global registers contain parameters used by both the SPI and the SCI submodules. These parameters
are used by the MCCI to interface with the CPU and other system modules.
STOP — Stop Enable
0 = Normal MCCI clock operation
1 = MCCI clock operation stopped
STOP places the MCCI into a low power state by disabling the system clock in most parts of the module.
MMCR is the only register guaranteed to be readable while STOP is asserted. STOP may be negated
by the CPU and by reset.
Bits [14:8] — Not Implemented
SUPV — Supervisor/Unrestricted
0 = Unrestricted access
1 = Supervisor access
In systems with controlled access levels, SUPV places assignable registers in either supervisor-only
data space or unrestricted data space. All MCCI registers reside in supervisor-only space. Because the
CPU16 in the MC68HC16Y1 operates only in supervisor mode, SUPV has no meaning.
Bits [6:4] — Not Implemented
IARB — Interrupt Arbitration Identification Number
Each module that generates interrupts has an IARB field. The value in this field is used to arbitrate be-
tween simultaneous interrupt requests of the same priority. The reset value of all IARB fields other than
that of the SCIM is $0 (lowest priority), to prevent priority conflict during initialization. The IARB field
must be initialized to a value between $F (highest priority) and $1 (lowest priority), or subsequent inter-
rupt requests will be identified by the CPU as spurious.
MTEST — MCCI Test Register
$YFFC02
MTEST is used in conjunction with SCIM test functions during factory test of the MCCI. Accesses to
MTEST must be made while the MCU is in test mode.
ILSCI determines the priority level of interrupts requested by each SCI. Separate fields hold interrupt
priority values for SCIA and SCIB. Priority is used to determine which interrupt is serviced first when two
or more modules or external peripherals simultaneously request an interrupt.
ILSCIA, ILSCIB — Interrupt Level for SCIA, SCIB
ILSCIA, ILSCIB determine the priority levels of SCIA and SCIB interrupts, respectively. This field must
contain a value between $1 (lowest priority) and $7 (highest priority) for interrupts to be recognized.
MMCR — MCCI Configuration Register
$YFFC00
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
STOP
0
SUPV
0
IARB
RESET:
0
1
0
ILSCI/MIVR — SCI Interrupt Request Level Register/MCCI Interrupt Vector Register
$YFFC04
15
14
13
12
11
10
9
8
7
1
0
ILSCIB
ILSCIA
MIVR
1
RESET:
0
1
相關PDF資料
PDF描述
MCV14AI/SL 8-BIT, FLASH, 20 MHz, RISC MICROCONTROLLER, PDSO14
MCV14ATI/SL 8-BIT, FLASH, 20 MHz, RISC MICROCONTROLLER, PDSO14
MCV14AI/P 8-BIT, FLASH, 20 MHz, RISC MICROCONTROLLER, PDIP14
MD8031AHB883B 8-BIT, 12 MHz, MICROCONTROLLER, CDIP40
MD8255A 24 I/O, PIA-GENERAL PURPOSE, PDIP40
相關代理商/技術參數
參數描述
M68HC705UGANG 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:High-density complementary metal oxide semiconductor (HCMOS) microcontroller unit
M68HC705UPGMR 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:High-density complementary metal oxide semiconductor (HCMOS) microcontroller unit
M68HC705X16PGMR 制造商:Rochester Electronics LLC 功能描述:- Bulk
M68HC711CFD 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:CONFIG REGISTER PROGRAMMING FOR EEPROM-BASED MHC MICROCONTROLLERS
M68HC711CFG 制造商:MOTOROLA 制造商全稱:Motorola, Inc 功能描述:CONFIG REGISTER PROGRAMMING FOR EEPROM-BASED MHC MICROCONTROLLERS
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*