參數資料
型號： LAN83C175
廠商： STANDARD MICROSYSTEMS CORP
元件分類： 微控制器/微處理器
英文描述： Ethernet CARDBUS Integrated Controller With Modem Support
中文描述： 1 CHANNEL(S), 100M bps, LOCAL AREA NETWORK CONTROLLER, PQFP208
封裝： 28 X 28 MM, 1.40 MM HEIGHT, TQFP-208
文件頁數： 66/92頁
文件大小： 299K
代理商： LAN83C175
66
84 - STATUS_m Register
3 and 2 - STS_EVNT: When bit 3 of this
register is 1, it indicates that RDYM has
transitioned from 0 to 1. When bit 2 of this
register is 1, it indicates that RINGIN has
transitioned from 0 to 1. When either of these
signals transition, it is considered a modem
event. If these bits are not masked by
NVCTL_m(1:0), an event will be logged in the
modem present state register bit 1 and the
modem function present state will go to 1. If
these bits are not masked by NVCTL_m(6:5) an
interrupt event will occur, causing an interrupt to
be sent to the host system if STATUSREG_EN,
from the NVCTL_E register, is 1.
1 - RDYM: This register reflects that status of
the RDYM signal driven by the modem. It is not
host writable.
0 - RINGIN: This register reflects that status of
the RINGIN signal driven by the modem. It is
not host writable.
88 - Modem Function Event Register
31 through 16 - Unused
15 - INTR_M: This indicates that the modem
has signaled an interrupt condition.
3 and 2 - BVD: Battery voltage detect is not
used, and a 0 is returned when this register is
read.
1 - STSCHG: When this signal is true, it
indicates
that
RDYM
transitioned from 0 to 1. It is reset by writing a 1
to this register location. Note also that
STSCHG_EN, NVCTL_e(12) must be active for
or
RINGIN
have
the CSTSCHG pin to be driven active to the
host.
0 - WP: Write protect is not used, and 0 is
returned in this bit location.
8C - Modem Function Mask Register
31 through 16 - Unused
15 - MSK_INTR_M: This is the masking bit for
the modem function event register bit 15.
6 - PWM: Pulse Width Modulation audio
enable. This value is always 0, as this chip
does not support this type of signal.
5 - BAM: Binary Audio Enable, this controls
whether binary audio from the modem will be
passed to the CardBus CAUDIO pin.
3 through 2 - MSK_BVD: This value is always
0.
1 - MSK_STSCHG: This is the masking bit for
the modem function event register bit 15.
0 - MSK_WP: This value is always 0.
90 - Modem Present State Register
31through 16 - Unused
15 - INTR_M: This indicates that the modem
has signaled an interrupt condition.
14 through 4 - Unused
3 and 2 - BVD: Battery voltage detect is not
used, and a 0 is returned when this register is
read.
相關PDF資料
PDF描述
LAN83C180 10/100 FAST ETHERNET PHY TRANSCEIVER
LAN83C185 HIGH PERFORMANCE SINGLE CHIP LOW POWER 10/100 ETHERNET PHYSICAL LAYER TRANSCEIVER
LAN83C183-JD FAST ETHERNET PHYSICAL LAYER DEVICE
LAN83C180TQFP 10/100 FAST ETHERNET PHY TRANSCEIVER
LAN83C183 FAST ETHERNET PHYSICAL LAYER DEVICE
相關代理商/技術參數
參數描述
LAN83C175TQFP 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:SMC Corporation of America 功能描述:83C175TQFP 制造商:SMSC 功能描述:
LAN83C175TQFP WAF 制造商:SMSC 功能描述:
LAN83C180 制造商:SMSC 制造商全稱:SMSC 功能描述:10/100 FAST ETHERNET PHY TRANSCEIVER
LAN83C180_01 制造商:SMSC 制造商全稱:SMSC 功能描述:10/100 Fast Ethernet PHY Transceiver
LAN83C180TQFP 制造商:SMSC 制造商全稱:SMSC 功能描述:10/100 Fast Ethernet PHY Transceiver
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*