參數資料
型號： LAN83C175
廠商： STANDARD MICROSYSTEMS CORP
元件分類： 微控制器/微處理器
英文描述： Ethernet CARDBUS Integrated Controller With Modem Support
中文描述： 1 CHANNEL(S), 100M bps, LOCAL AREA NETWORK CONTROLLER, PQFP208
封裝： 28 X 28 MM, 1.40 MM HEIGHT, TQFP-208
文件頁數： 19/92頁
文件大?。?/td> 299K
代理商： LAN83C175
19
DWORD 3 - Next Descriptor Pointer
Bit Number and Description
31 through 2 - Starting address of next
descriptor in host memory space. Descriptors
must be DWORD aligned.
1 - 0: Unused.
The software driver initializes the receive
process by writing the receive control register,
interrupt mask register and general control
register. The software must also program the
CardBus Receive Current Descriptor Address
Register (PRCDAR) with the address in host
memory where the first receive descriptor will
be located.
To allow packet receptions, the software driver
programs the receive descriptor chain and
then sets the RXQUEUED and START_RX
bits in the COMMAND register. Setting
START_RX brings the CSMA/CD receiver
online. The receive DMA is enabled by setting
RXQUEUED. The software driver should set
RXQUEUED before or simultaneous to
bringing the receiver online so that the
receiver does not overflow the local buffer
while waiting for a descriptor to be queued.
The first descriptor must be valid before the
RXQUEUED bit is set. The first descriptor will
be read as soon as it is queued, even if no
receptions have occurred on the network.
The receive lookahead method offers
maximum performance in most cases.
Free Buffer Pool Method
In this mode the software driver pre-allocates
a pool of free buffers for frames received by
the LAN83C175. The ONECOPY bit in the
general control register must be set so that
the each frame may be copied into the buffer
pool without host intervention. The descriptors
for the free buffer pool may point directly to
the buffers, or point to a fragment list which in
turn specifies the buffers.
When the RXQUEUED bit is set, the receive DMA
will attempt to read the first descriptor from the
address pointed to by its Current Descriptor
Address register. If the ownership bit is 0, the
RXQUEUED bit will be cleared (and the receive
queue empty (RQE) interrupt set) and the Current
Descriptor Address register will not be changed.
If the ownership bit is equal to 1, the LAN83C175
will accept the descriptor and update its Current
Descriptor Address register with the value in the
Next Descriptor Address field. The LAN83C175
will save the descriptor information until a frame
is received. If the fraglist control bit is also 1, then
the receive DMA will read and save the address
pointer and data length for the first buffer in the
fragment list. The offset field in the descriptor
(see buffer length field) should be set to zero,
otherwise the copy will not begin at the start of the
frame. The fragment list format for the receive
DMA is identical to the format for the transmit
DMA.
As soon as a frame is received, the LAN83C175
will begin copying it from the local receive buffer
into the allocated buffer in host memory. If early
receive is enabled, the LAN83C175 can begin the
copy while reception is still in progress. The
receive DMA always monitors the local buffer
contents so that a receive underflow can never
occur. As soon as the receive DMA has copied
the number of bytes in the CardBus Receive Copy
Threshold register, it will set the receive copy
threshold (RCT) interrupt. When the receive DMA
has copied the entire packet from the local RAM
into host memory, it will post the receive status
into the first descriptor for the frame and set the
receive copy complete (RCC) interrupt. The DMA
will read the next descriptor and, if owned by the
NIC, check to see if there are any more frames to
copy out of the local RAM. If the receive DMA fills
the first host buffer before the entire frame has
been copied, it will read the next descriptor or
fragment list entry to find more buffer space. This
process will continue until the entire frame has
相關PDF資料
PDF描述
LAN83C180 10/100 FAST ETHERNET PHY TRANSCEIVER
LAN83C185 HIGH PERFORMANCE SINGLE CHIP LOW POWER 10/100 ETHERNET PHYSICAL LAYER TRANSCEIVER
LAN83C183-JD FAST ETHERNET PHYSICAL LAYER DEVICE
LAN83C180TQFP 10/100 FAST ETHERNET PHY TRANSCEIVER
LAN83C183 FAST ETHERNET PHYSICAL LAYER DEVICE
相關代理商/技術參數
參數描述
LAN83C175TQFP 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:SMC Corporation of America 功能描述:83C175TQFP 制造商:SMSC 功能描述:
LAN83C175TQFP WAF 制造商:SMSC 功能描述:
LAN83C180 制造商:SMSC 制造商全稱:SMSC 功能描述:10/100 FAST ETHERNET PHY TRANSCEIVER
LAN83C180_01 制造商:SMSC 制造商全稱:SMSC 功能描述:10/100 Fast Ethernet PHY Transceiver
LAN83C180TQFP 制造商:SMSC 制造商全稱:SMSC 功能描述:10/100 Fast Ethernet PHY Transceiver
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*