參數資料
型號： EP7212-CV-A
廠商： CIRRUS LOGIC INC
元件分類： 微控制器/微處理器
英文描述： HIGH-PERFORMANCE, LOW-POWER SYSTEM-ON-CHIP WITH LCD CONTROLLER AND DIGITAL AUDIO INTERFACE(DAI)
中文描述： 32-BIT, MROM, 74 MHz, RISC MICROCONTROLLER, PQFP208
封裝： LQFP-208
文件頁數： 94/136頁
文件大小： 2289K
代理商： EP7212-CV-A
EP7212
94
DS474PP1
5.16.3.1
Right Channel Transmit FIFO Service Request Flag (RCTS)
The Right Channel Transmit FIFO Service Request Flag (RCTS) is a read-only bit which is set when
the Right Channel Transmit FIFO is nearly empty and requires service to prevent an underrun. RCTS
is set any time the Right Channel Transmit FIFO has four or fewer entries of valid data (half full or
less), and is cleared when it has five or more entries of valid data. When the RCTS bit is set, an in-
terrupt request is made unless the Right Channel Transmit FIFO interrupt request mask (RCTM) bit
is cleared. After the CPU fills the FIFO such that four or more locations are filled within the Right Chan-
nel Transmit FIFO, the RCTS flag (and the service request and / or interrupt) is automatically cleared.
5.16.3.2
Right Channel Receive FIFO Service Request Flag (RCRS)
The Right Channel Receive FIFO Service Request Flag (RCRS) is a read-only bit which is set when
the Right Channel Receive FIFO is nearly filled and requires service to prevent an overrun. RCRS is
set any time the Right Channel Receive FIFO has six or more entries of valid data (half full or more),
and cleared when it has five or fewer (less than half full) entries of data. When the RCRS bit is set,
an interrupt request is made unless the Right Channel Receive FIFO interrupt request mask (RCRM)
bit is cleared. After six or more entries are removed from the receive FIFO, the LCRS flag (and the
service request and / or interrupt) is automatically cleared.
5.16.3.3
Left Channel Transmit FIFO Service Request Flag (LCTS)
The Left Channel Transmit FIFO Service Request Flag (LCTS) is a read-only bit which is set when
the Left Channel Transmit FIFO is nearly empty and requires service to prevent an underrun. LCTS
is set any time the Left Channel Transmit FIFO has four or fewer entries of valid data (half full or less).
It is cleared when it has five or more entries of valid data. When the LCTS bit is set, an interrupt re-
quest is made unless the Left Channel Transmit FIFO interrupt request mask (LCTM) bit is cleared.
After the CPU fills the FIFO such that four or more locations are filled within the Left Channel Transmit
FIFO, the LCTS flag (and the service request and / or interrupt) is automatically cleared.
5.16.3.4
Left Channel Receive FIFO Service Request Flag (LCRS)
The Left Channel Receive FIFO Service Request Flag (LCRS) is a read-only bit which is set when
the Left Channel Receive FIFO is nearly filled and requires service to prevent an overrun. LCRS is
set any time the Left Channel Receive FIFO has six or more entries of valid data (half full or more),
and cleared when it has five or fewer (less than half full) entries of data. When the LCRS bit is set, an
interrupt request is made unless the Left Channel Receive FIFO interrupt request mask (LCRM) bit
is cleared. After six or more entries are removed from the receive FIFO, the LCRS flag (and the ser-
vice request and / or interrupt) is automatically cleared.
5.16.3.5
Right Channel Transmit FIFO Underrun Status (RCTU)
The Right Channel Transmit FIFO Underrun Status Bit (RCTU) is set when the Right Channel Trans-
mit logic attempts to fetch data from the FIFO after it has been completely emptied. When an underrun
occurs, the Right Channel Transmit logic continuously transmits the last valid right channel value
which was transmitted before the underrun occurred. Once data is placed in the FIFO and it is trans-
ferred down to the bottom, the Right Channel Transmit logic uses the new value within the FIFO for
transmission. When the RCTU bit is set, an interrupt request is made.
5.16.3.6
Right Channel Receive FIFO Overrun Status (RCRO)
The Right Channel Receive FIFO Overrun Status Bit (RCRO) is set when the right channel receive
logic attempts to place data into the Right Channel Receive FIFO after it has been completely filled.
Each time a new piece of data is received, the set signal to the RCRO status bit is asserted, and the
newly received data is discarded. This process is repeated for each new sample received until at least
one empty FIFO entry exists. When the RCRO bit is set, an interrupt request is made.
相關PDF資料
PDF描述
EP7309 HIGH PERFORMANCE LOW POWER SYSTEM ON CHIP ENHANCED DIGITAL AUDIO INTERFACE
EP7309-CB-C CONN MODULAR JACK 8-8 R/A UNSHLD
EP7309-CR-C HIGH PERFORMANCE LOW POWER SYSTEM ON CHIP ENHANCED DIGITAL AUDIO INTERFACE
EP7309-CV-C HIGH PERFORMANCE LOW POWER SYSTEM ON CHIP ENHANCED DIGITAL AUDIO INTERFACE
EP7309-ER-C HIGH PERFORMANCE LOW POWER SYSTEM ON CHIP ENHANCED DIGITAL AUDIO INTERFACE
相關代理商/技術參數
參數描述
EP7212-CV-D 制造商:Rochester Electronics LLC 功能描述:- Bulk
EP7230 功能描述:電氣外殼配件 E-PANEL FITS 72 X 30 RoHS:否 制造商:Hammond Manufacturing 產品:Rack Accessories 類型: 面板寬度: 面板高度: 外部寬度: 外部高度: 外部深度: 顏色:Black
EP7236 功能描述:電氣外殼配件 E-PANEL FITS 72 X 36 RoHS:否 制造商:Hammond Manufacturing 產品:Rack Accessories 類型: 面板寬度: 面板高度: 外部寬度: 外部高度: 外部深度: 顏色:Black
EP7309 制造商:CIRRUS 制造商全稱:Cirrus Logic 功能描述:HIGH PERFORMANCE LOW POWER SYSTEM ON CHIP ENHANCED DIGITAL AUDIO INTERFACE
EP7309_05 制造商:CIRRUS 制造商全稱:Cirrus Logic 功能描述:High-performance, Low-power, System-on-chip with Enhanced Digital Audio Interface
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*