- 您現在的位置：買賣IC網 > PDF目錄9504 > AD7294BCPZ (Analog Devices Inc)IC ADC 12BIT I2C/SRL 1M 56LFCSP PDF資料下載
參數資料
| 型號： | AD7294BCPZ |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 14/49頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC ADC 12BIT I2C/SRL 1M 56LFCSP |
| 標準包裝： | 1 |
| 類型： | ADC，DAC |
| 分辨率（位）： | 12 b |
| 采樣率（每秒）： | 22.22k |
| 數據接口： | I²C，串行 |
| 電壓電源： | 模擬和數字 |
| 電源電壓： | 4.4 V ~ 5.5 V |
| 工作溫度： | -40°C ~ 105°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 56-VFQFN 裸露焊盤，CSP |
| 供應商設備封裝： | 56-LFCSP-VQ（8x8） |
| 包裝： | 托盤 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁當前第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁
AD7294
Data Sheet
Rev. H | Page 20 of 48
THEORY OF OPERATION
ADC OVERVIEW
The AD7294 provides the user with a 9-channel multiplexer, an
on-chip track-and-hold, and a successive approximation ADC
based around a capacitive DAC. The analog input range for the
part can be selected as a 0 V to VREF input or a 2 × VREF input,
configured with either single-ended or differential analog inputs.
The AD7294 has an on-chip 2.5 V reference that can be disabled
when an external reference is preferred. If the internal ADC
reference is to be used elsewhere in a system, the output must
first be buffered.
The various monitored and uncommitted input signals are multi-
plexed into the ADC. The AD7294 has four uncommitted
analog input channels, VIN0 to VIN3. These four channels allow
single-ended, differential, and pseudo differential mode
measurements of various system signals.
ADC TRANSFER FUNCTIONS
The designed code transitions occur at successive integer LSB
values (1 LSB, 2 LSB, and so on). In single-ended mode, the
LSB size is VREF/4096 when the 0 V to VREF range is used and
2 × VREF/4096 when the 0 V to 2 × VREF range is used. The ideal
transfer characteristic for the ADC when outputting straight
binary coding is shown in Figure 35.
000...000
111...111
1LSB = VREF/4096
1LSB
VREF – 1LSB
ANALOG INPUT
ADC
CO
DE
0V
000...001
000...010
111...110
111...000
011...111
NOTE
1. VREF IS EITHER VREF OR 2 × VREF.
05747-
016
Figure 35. Single-Ended Transfer Characteristic
In differential mode, the LSB size is 2 × VREF/4096 when the 0 V
to VREF range is used, and 4 × VREF/4096 when the 0 V to 2 × VREF
range is used. The ideal transfer characteristic for the ADC when
outputting twos complement coding is shown in Figure 36 (with
the 2 × VREF range).
100...000
011...111
1LSB = 2 × VREF/4096
+VREF – 1LSB
–VREF + 1LSB VREF – 1LSB
ANALOG INPUT
ADC
CO
DE
100...001
100...010
011...110
000...001
000...000
111...111
05747-
017
Figure 36. Differential Transfer Characteristic with VREF ± VREF Input Range
For VIN0 to VIN3 in single-ended mode, the output code is
straight binary, where
VIN = 0 V, DOUT = x000, VIN = VREF 1 LSB, and DOUT = xFFF
In differential mode, the code is twos complement, where
VIN+ VIN = 0 V, and DOUT = x00
VIN+ VIN = VREF 1 LSB, and DOUT = x7FF
VIN+ VIN = VREF, and DOUT = x800
Channel 5 and Channel 6 (current sensor inputs) are twos
complement, where
VIN+ VIN = 0 mV, and DOUT = x000
VIN+ VIN = VREF/12.5 1 LSB, DOUT = x7FF
VIN+ VIN = VREF/12.5, DOUT = x800
Channel 7 to Channel 9 (temperature sensor inputs) are twos
complement with the LSB equal to 0.25°C, where
TIN = 0°C, and DOUT = x000
TIN = +255.75°C, and DOUT = x7FF
TIN = 256°C, and DOUT = x800
ANALOG INPUTS
The AD7294 has a total of four analog inputs. Depending on
the configuration register setup, they can be configured as two
single-ended inputs, two pseudo differential channels, or two
fully differential channels. See the Register Setting section for
further details.
Single-Ended Mode
The AD7294 can have four single-ended analog input channels.
In applications where the signal source has high impedance, it is
recommended to buffer the analog input before applying it to the
ADC. The analog input range can be programmed to be either
0 V to VREF or 0 V to 2 × VREF. In 2 × VREF mode, the input is
effectively divided by 2 before the conversion takes place. Note
that the voltage with respect to GND on the ADC analog input
pins cannot exceed AVDD.
If the analog input signal to be sampled is bipolar, the internal
reference of the ADC can be used to externally bias up this
相關PDF資料 |
PDF描述 |
|---|---|
| MS27505E17B8SC | CONN RCPT 8POS BOX MNT W/SCKT |
| MS3114F24-61S | CONN RCPT 61POS JAM NUT W/SCKT |
| D38999/20WH21PA | CONN RCPT 21POS WALL MNT W/PINS |
| MS27656T23B55PA | CONN RCPT 55POS WALL MNT W/PINS |
| D38999/26MJ43JA | CONN PLUG 43POS STRAIGHT W/SCKT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AD7294BCPZRL | 功能描述:IC ADC 12BIT I2C/SRL 1M 56LFCSP RoHS:是 類別:集成電路 (IC) >> 數據采集 - ADCs/DAC - 專用型 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:50 系列:- 類型:數據采集系統（DAS） 分辨率（位）:16 b 采樣率（每秒）:21.94k 數據接口:MICROWIRE?，QSPI?，串行，SPI? 電壓電源:模擬和數字 電源電壓:1.8 V ~ 3.6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:40-WFQFN 裸露焊盤 供應商設備封裝:40-TQFN-EP（6x6） 包裝:托盤 |
| AD7294BSUZ | 功能描述:模數轉換器 - ADC 12B Monitor & Cntrl System w/ Temp Sensr RoHS:否 制造商:Analog Devices 通道數量: 結構: 轉換速率: 分辨率: 輸入類型: 信噪比: 接口類型: 工作電源電壓: 最大工作溫度: 安裝風格: 封裝 / 箱體: |
| AD7294BSUZRL | 制造商:Analog Devices 功能描述:Temp Sensor Digital Serial (2-Wire, I2C) 64-Pin TQFP 制造商:Analog Devices 功能描述:TEMP SENSOR DGTL SERL (2-WIRE, I2C) 64TQFP - Tape and Reel 制造商:Analog Devices 功能描述:IC ADC 12BIT W/DAC/TEMP 64TQFP 制造商:Analog Devices Inc. 功能描述:Analog to Digital Converters - ADC 12-Bit Multi-Channel ADC DAC wt Temp IC 制造商:Analog Devices 功能描述:CONVERTER - ADC |
| AD7298 | 制造商:AD 制造商全稱:Analog Devices 功能描述:8-Channel, 1MSPS, 12-Bit SAR ADC with Temperature Sensor |
| AD7298-1BCPZ | 功能描述:IC ADC 10BIT SPI/SRL 8CH 20LFCSP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 模數轉換器 系列:- 其它有關文件:TSA1204 View All Specifications 標準包裝:1 系列:- 位數:12 采樣率（每秒）:20M 數據接口:并聯 轉換器數目:2 功率耗散（最大）:155mW 電壓電源:模擬和數字 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:48-TQFP 供應商設備封裝:48-TQFP（7x7） 包裝:Digi-Reel® 輸入數目和類型:4 個單端，單極；2 個差分，單極 產品目錄頁面:1156 (CN2011-ZH PDF) 其它名稱:497-5435-6 |
發布緊急采購，3分鐘左右您將得到回復。