參數資料
型號: W83977CTF-AW
英文描述: PERIPHERAL (MULTIFUNCTION) CONTROLLER
中文描述: 周邊(多功能)控制器
文件頁數: 75/161頁
文件大小: 592K
代理商: W83977CTF-AW
W83977EF/ CTF
PRELIMINARY
Publication Release Date: March 1999
-66 -
Revision A1
5.2.3 Printer Control Latch and Printer Control Swapper
The system microprocessor can read the contents of the printer control latch by reading the printer
control swapper. Bit definitions are as follows:
1
1
1
2
3
4
5
6
7
0
STROBE
AUTO FD
INIT#
SLCT IN
IRQ ENABLE
DIR
Bit 7, 6: These two bits are a logic one during a read. They can be written.
Bit 5: Direction control bit
When this bit is a logic 1, the parallel port is in input mode (read); when it is a logic 0, the
parallel port is in output mode (write). This bit can be read and written. In SPP mode, this bit
is invalid and fixed at zero.
Bit 4: A 1 in this position allows an interrupt to occur when
ACK#
changes from low to high.
Bit 3: A 1 in this bit position selects the printer.
Bit 2: A 0 starts the printer (50 microsecond pulse, minimum).
Bit 1: A 1 causes the printer to line-feed after a line is printed.
Bit 0: A 0.5 microsecond minimum high active pulse clocks data into the printer. Valid data must be
present for a minimum of 0.5 microseconds before and after the strobe pulse.
5.2.4 EPP Address Port
The address port is available only in EPP mode. Bit definitions are as follows:
1
2
3
4
5
6
7
0
PD0
PD1
PD2
PD3
PD4
PD5
PD6
PD7
相關PDF資料
PDF描述
W83977CTF-PW PERIPHERAL (MULTIFUNCTION) CONTROLLER
W83977TF(EOL) W83877TF plus KBC. CIR. RTC
W83C42 KEYBOARD CONTROLLER
W83C42P KEYBOARD CONTROLLER
W83C45 Keyboard Controller
相關代理商/技術參數
參數描述
W83977CTF-PW 制造商:WINBOND 制造商全稱:Winbond 功能描述:WINBOND I/O
W83977EF 制造商:WINBOND 制造商全稱:Winbond 功能描述:WINBOND ISA I/O
W83977EF-AW 制造商:WINBOND 制造商全稱:Winbond 功能描述:WINBOND ISA I/O
W83977EF-PW 制造商:WINBOND 制造商全稱:Winbond 功能描述:WINBOND I/O
W83977EG 制造商:WINBOND 制造商全稱:Winbond 功能描述:WINBOND ISA I/O