參數資料
型號： PCA9665
廠商： NXP Semiconductors N.V.
英文描述： Fm+ parallel bus to I2C-bus controller
中文描述： 調頻并行總線I2C總線控制器
文件頁數： 51/91頁
文件大?。?/td> 372K
代理商： PCA9665
PCA9665_2
NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 02 — 7 December 2006
51 of 91
NXP Semiconductors
PCA9665
Fm+ parallel bus to I
2
C-bus controller
–
the SCL line is held LOW by the PCA9665 after the 2 bytes have been sent
–
the PCA9665 sends an Interrupt, sets SI = 1 and updates I2CSTA register
–
I2CSTA reads 28h
5. Program I2CCOUNT = 40h (64 bytes to read and Last byte acknowledged).
6. Load I2CDAT with A1h (I
2
C-bus slave address and Read command).
7. Program I2CCON with STA = 1, SI = 0, MODE = 1.
–
the PCA9665 sends a ReSTART command
–
an interrupt is asserted and the I2CSTA register is updated
–
the I2CSTA register reads 10h
8. Program I2CCON with STA = STO = SI = 0, MODE = 1.
–
address A1h is sent followed by a read of 64 data bytes
–
the last data byte is acknowledged
–
the SCL line is held LOW by the PCA9665 after the data is read
–
the PCA9665 sends an interrupt and updates I2CSTA register
–
I2CSTA reads 50h
9. The microcontroller reads the 64 data bytes from the PCA9665.
10. Program I2CCOUNT = C0h (64 bytes and Last byte is not acknowledged).
11. Program I2CCON with STA = STO = SI = 0, MODE = 1.
12. The PCA9665 reads 64 bytes and does not acknowledge the last byte.
–
the PCA9665 sends an Interrupt and updates I2CSTA register
–
the I2CSTA reads 58h
–
the SCL line is held LOW by the PCA9665
–
the slave should release the SDA line
13. The microcontroller reads the 64 bytes from the PCA9665.
14. Program I2CCON with SI = STA = 0, ST0 = 1, MODE = X.
–
the PCA9665 sends a STOP condition
–
no interrupt is generated by the PCA9665
–
the I2CSTA register contains F8h
8.6 I2CCOUNT register
When a write to the I2CCOUNT register is requested, the buffer pointer is reset and points
at the first byte. Loading of the data in the I2CDAT buffer then starts at the first byte.
Once an operation has been performed (SI = 1 and an interrupt is generated), the
I2CCOUNT register contains the number of bytes that have been received (Receiver
mode) or the number of bytes that have been sent (Transmitter mode). See
Table 42
for
more information.
In Buffered Transmitter mode, the first byte that is sent to the I
2
C-bus is always the first
byte that has been loaded in the I2CDAT buffer.
相關PDF資料
PDF描述
PCA9665N Fm+ parallel bus to I2C-bus controller
PCA9671 Remote 16-bit I/O expander for Fm+ I2C-bus with reset
PCA9671DB Remote 16-bit I/O expander for Fm+ I2C-bus with reset
PCA9671DK Remote 16-bit I/O expander for Fm+ I2C-bus with reset
PCA9673 Remote 16-bit I/O expander for Fm+ I2C-bus with interrupt and reset
相關代理商/技術參數
參數描述
PCA9665APW,118 功能描述:I2C 接口集成電路 Fm+ parallel bus I2C bus controller RoHS:否 制造商:NXP Semiconductors 電源電壓-最大:5.5 V 電源電壓-最小:2.3 V 最大工作頻率:400 KHz 最大工作溫度:+ 85 C 封裝 / 箱體:TSSOP-16
PCA9665BS,118 功能描述:I2C 接口集成電路 FM+ I2C BUS CONTRLLR RoHS:否 制造商:NXP Semiconductors 電源電壓-最大:5.5 V 電源電壓-最小:2.3 V 最大工作頻率:400 KHz 最大工作溫度:+ 85 C 封裝 / 箱體:TSSOP-16
PCA9665BS-T 功能描述:I2C 接口集成電路 FM+ I2C BUS CONTRLLR RoHS:否 制造商:NXP Semiconductors 電源電壓-最大:5.5 V 電源電壓-最小:2.3 V 最大工作頻率:400 KHz 最大工作溫度:+ 85 C 封裝 / 箱體:TSSOP-16
PCA9665D 功能描述:I2C 接口集成電路 FM+ I2C BUS CONTRLLR RoHS:否 制造商:NXP Semiconductors 電源電壓-最大:5.5 V 電源電壓-最小:2.3 V 最大工作頻率:400 KHz 最大工作溫度:+ 85 C 封裝 / 箱體:TSSOP-16
PCA9665D,112 功能描述:I2C 接口集成電路 FM+ I2C BUS CONTRLLR RoHS:否 制造商:NXP Semiconductors 電源電壓-最大:5.5 V 電源電壓-最小:2.3 V 最大工作頻率:400 KHz 最大工作溫度:+ 85 C 封裝 / 箱體:TSSOP-16
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*