參數資料
型號： M306H7MC-XXXFP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP100
封裝： 14 X 20 MM, 0.65 MM PITCH, PLASTIC, QFP-100
文件頁數： 43/115頁
文件大?。?/td> 3146K
代理商： M306H7MC-XXXFP
Rev.2.10
Oct 25, 2006
Page 33 of 326
REJ03B0152-0210
M306H7MG-XXXFP/MC-XXXFP/FGFP
4. CLOCK GENERATION CIRCUIT
4.2
CPU Clock and Peripheral Function Clock
Two type clocks: CPU clock to operate the CPU and peripheral function clocks to operate the peripheral functions.
4.2.1
CPU Clock and BCLK
These are operating clocks for the CPU and watchdog timer.
The clock source for the CPU clock can be chosen to be the main clock or sub clock.
If the main clock is selected as the clock source for the CPU clock, the selected clock source can be divided by
1 (undivided), 2, 4, 8 or 16 to produce the CPU clock. Use the CM06 bit in CM0 register and the CM17 to
CM16 bits in CM1 register to select the divide-by-n value.
When the level on the STARTB pin is “H”, the main clock divided by 8 provides the CPU clock after reset.
When the level on the STARTB pin is “L”, the sub clock of frequency divided by 8 provides the CPU clock
after reset.
At this time, the CM04 bit and the CM05 bit of CM0 register become “1” .
Note that when entering stop mode from high or middle speed mode, or when the CM05 bit of CM0 register is
set to “1” (main clock turned off) in low-speed mode, the CM06 bit of CM0 register is set to “1” (divide-by-8
mode).
4.2.2
Peripheral Function Clock(f1, f2, f8, f32, f1SIO, f2SIO, f8SIO, f32SIO, fAD, fC32)
These are operating clocks for the peripheral functions.
Of these, fi (i = 1, 2, 8, 32) and fiSIO are derived from the main clock by dividing them by i. The clock fi is used
for timers A and B, and fiSIO is used for serial I/O. The f8 and f32 clocks can be output from the CLKOUT pin.
The fAD clock is produced from the main clock, and is used for the A/D converter.
When the WAIT instruction is executed after setting the CM02 bit of CM0 register to “1” (peripheral function
clock turned off during wait mode), or when the microcomputer is in low power dissipation mode, the fi, fiSIO
and fAD clocks are turned off.
The fC32 clock is produced from the sub clock, and is used for timers A and B. This clock can be used when the
sub clock is on.
4.3
Clock Output Function
During single-chip mode, the f8, f32 or fC clock can be output from the CLKOUT pin. Use the CM01 to CM00 bits of
CM0 register to select.
相關PDF資料
PDF描述
M306NMFHTGP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP128
M306NMFJVGP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP128
M306NKFJVGP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
M306NKFHVGP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
M306NKFJTGP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
M306H7MG-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER with DATA ACQUISITION CONTROLLER
M306K7F8LRP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M306K9FCLRP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M306K9T2-CPE 功能描述:M-SUPPORT TOOL RoHS:否 類別:編程器，開發系統 >> 內電路編程器、仿真器以及調試器 系列:- 產品變化通告:Development Systems Discontinuation 19/Jul/2010 標準包裝:1 系列:* 類型:* 適用于相關產品:* 所含物品:*
M306KAFCLRP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER Description
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*