LXT350
T1/E1 Short Haul Transceiver with Crystal-less Jitter Attenuation
Datasheet
The LXT350 is a full-featured, fully-integrated transceiver for T1 and E1 short-haul
applications. The LXT350 is software switchable between T1 and E1 operation, and offers pulse
equalization settings for all short-haul T1 and E1 line interface (LIU) applications.
LXT350 provides both a serial port for microprocessor control (Host mode) as well as stand-
alone operation (Hardware mode). The device incorporates advanced crystal-less digital jitter
attenuation in either the transmit or receive data path starting at 3 Hz. B8ZS/HDB3 encoding/
decoding and unipolar or bipolar data I/O are selectable. Loss of signal monitoring and a variety
of diagnostic loopback modes can also be selected.
Applications
Product Features
I
SONET/SDH tributary interfaces
I
Digital cross connects
I
Public/private switching trunk line
interfaces
I
Microwave transmission systems
I
Fully integrated transceivers for Short-Haul
T1 or E1 interfaces
I
Crystal-less digital jitter attenuation
—Select either transmit or receive path
—No crystal or high speed external clock
required
I
Meet or exceed specifications in ANSI
T1.403 and T1.408; ITU I.431, G.703,
G.736, G.775 and G.823; ETSI 300-166
and 300-233; and AT&T Pub 62411
I
Supports 75
(E1 coax), 100
(T1
twisted-pair) and 120
(E1 twisted-pair)
applications
I
Fully restores the received signal after
transmission through a cable with
attenuation of 18dB, at 1024 kHz
I
Five pulse equalization settings for T1
short-haul applications
I
Transmit/receive performance monitors
with Driver Fail Monitor Open (DFM) and
Loss of Signal (LOS) outputs
I
Selectable unipolar or bipolar data I/O and
B8ZS/HDB3 encoding/decoding
I
QRSS generator/detector for testing or
monitoring
I
Output short circuit current limit protection
I
Local, remote and analog loopback
capability
I
Compatible with Intel’s LXT360/361 T1/
E1 long haul/short haul transceiver
(Universal LIU)
I
Multiple register serial interface for
microprocessor control
I
Available in 28-pin PLCC and 44-pin
PQFP packages
As of January 15, 2001, this document replaces the Level One document
LXT350 — Integrated T1/E1 Short Haul Transceiver with Crystal-less Jitter Attenuation
.
Order Number: 249029-001
January 2001