參數資料
型號： BXM80526B700
廠商： INTEL CORP
元件分類： 微控制器/微處理器
英文描述： 64-BIT, 700 MHz, MICROPROCESSOR, CPGA495
封裝： MICRO, PGA2-495
文件頁數： 70/85頁
文件大小： 795K
代理商： BXM80526B700
Mobile Intel Pentium III Processor in BGA2 and Micro-PGA2 Packages
at 850 MHz, 800 MHz, 750 MHz, 700 MHz, and Low-voltage 600 MHz
Datasheet
Order#-XXX
64
This transaction may optionally be converted to an external error signal (e.g., NMI) by system
logic. The processor will keep IERR# asserted until it is handled in software or with the assertion
of RESET#, BINIT, or INIT#.
IGNNE# (I - 1.5V Tolerant)
The IGNNE# (Ignore Numeric Error) signal is asserted to force the processor to ignore a numeric
error and continue to execute non-control floating-point instructions. If IGNNE# is deasserted, the
processor freezes on a non-control floating-point instruction if a previous instruction caused an
error. IGNNE# has no affect when the NE bit in control register 0 (CR0) is set.
INIT# (I - 1.5V Tolerant)
The INIT# (Initialization) signal is asserted to reset integer registers inside the processor without
affecting the internal (L1 or L2) caches or the floating-point registers. The processor begins
execution at the power-on reset vector configured during power-on configuration. The processor
continues to handle snoop requests during INIT# assertion. INIT# is an asynchronous input.
If INIT# is sampled active on RESET#'s active-to-inactive transition, then the processor executes
its built-in self test (BIST).
INTR (I - 1.5V Tolerant)
The INTR (Interrupt) signal indicates that an external interrupt has been generated. INTR becomes
the LINT0 signal when the APIC is enabled. The interrupt is maskable using the IF bit in the
EFLAGS register. If the IF bit is set, the processor vectors to the interrupt handler after
completing the current instruction execution. Upon recognizing the interrupt request, the processor
issues a single Interrupt Acknowledge (INTA) bus transaction. INTR must remain active until the
INTA bus transaction to guarantee its recognition.
LINT[1:0] (I - 1.5V Tolerant)
The LINT[1:0] (Local APIC Interrupt) signals must be connected to the appropriate pins/balls of
all APIC bus agents, including the processor and the system logic or I/O APIC component. When
APIC is disabled, the LINT0 signal becomes INTR, a maskable interrupt request signal, and
LINT1 becomes NMI, a non-maskable interrupt. INTR and NMI are backward compatible with
the same signals for the Pentium processor. Both signals are asynchronous inputs.
Both of these signals must be software configured by programming the APIC register space to be
used either as NMI/INTR or LINT[1:0] in the BIOS. If the APIC is enabled at reset, then
LINT[1:0] is the default configuration.
LOCK# (I/O - GTL+)
The LOCK# (Lock) signal indicates to the system that a sequence of transactions must occur
atomically. This signal must be connected to the appropriate pins/balls on both agents on the
system bus. For a locked sequence of transactions, LOCK# is asserted from the beginning of the
first transaction through the end of the last transaction.
相關PDF資料
PDF描述
BXM80536GC2100F 32-BIT, 2100 MHz, MICROPROCESSOR, CPGA478
BXM80536GC1800F 32-BIT, 1800 MHz, MICROPROCESSOR, CPGA478
BXM80536GC1600F 32-BIT, 1600 MHz, MICROPROCESSOR, CPGA478
BYP60K4 60 A, 400 V, SILICON, RECTIFIER DIODE
BYS10-45TR3 1.5 A, 45 V, SILICON, RECTIFIER DIODE
相關代理商/技術參數
參數描述
BXM80536NC1400ES L7LS 制造商:Intel 功能描述:CELERON M,360,1.40GHZ,1M CACHE, 400MHZ FSB,1.26V,UFCPGA - Boxed Product (Development Kits)
BXMP1000 制造商:SPECTRUM 制造商全稱:Spectrum Microwave, Inc. 功能描述:RF AMPLIFIER
BXMP1001 制造商:SPECTRUM 制造商全稱:Spectrum Microwave, Inc. 功能描述:RF AMPLIFIER
BXMP1002 制造商:SPECTRUM 制造商全稱:Spectrum Microwave, Inc. 功能描述:RF AMPLIFIER
BXMP1003 制造商:SPECTRUM 制造商全稱:Spectrum Microwave, Inc. 功能描述:RF AMPLIFIER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*