參數資料
型號: BX80557E2140
廠商: INTEL CORP
元件分類: 微控制器/微處理器
英文描述: MICROPROCESSOR, PBGA775
封裝: LGA-775
文件頁數: 83/107頁
文件大?。?/td> 1474K
代理商: BX80557E2140
Datasheet
77
Thermal Specifications and Design Considerations
5.1.2
Thermal Metrology
The maximum and minimum case temperatures (TC) for the processor is specified in
Table 26. This temperature specification is meant to help ensure proper operation of
the processor. Figure 17 illustrates where Intel recommends TC thermal measurements
should be made. For detailed guidelines on temperature measurement methodology,
refer to the appropriate Thermal and Mechanical Design Guidelines (see Section 1.2).
5.2
Processor Thermal Features
5.2.1
Thermal Monitor
The Thermal Monitor feature helps control the processor temperature by activating the
thermal control circuit (TCC) when the processor silicon reaches its maximum operating
temperature. The TCC reduces processor power consumption by modulating (starting
and stopping) the internal processor core clocks. The Thermal Monitor feature must
be enabled for the processor to be operating within specifications. The
temperature at which Thermal Monitor activates the thermal control circuit is not user
configurable and is not software visible. Bus traffic is snooped in the normal manner,
and interrupt requests are latched (and serviced during the time that the clocks are on)
while the TCC is active.
When the Thermal Monitor feature is enabled, and a high temperature situation exists
(i.e., TCC is active), the clocks will be modulated by alternately turning the clocks off
and on at a duty cycle specific to the processor (typically 30–50%). Clocks often will
not be off for more than 3.0 microseconds when the TCC is active. Cycle times are
processor speed dependent and will decrease as processor core frequencies increase. A
small amount of hysteresis has been included to prevent rapid active/inactive
transitions of the TCC when the processor temperature is near its maximum operating
temperature. Once the temperature has dropped below the maximum operating
temperature, and the hysteresis timer has expired, the TCC goes inactive and clock
modulation ceases.
With a properly designed and characterized thermal solution, it is anticipated that the
TCC would only be activated for very short periods of time when running the most
power intensive applications. The processor performance impact due to these brief
periods of TCC activation is expected to be so minor that it would be immeasurable. An
Figure 17.
Case Temperature (TC) Measurement Location
37.5 mm
Measure T
C a t this point
(geometric center of the package)
3
7
.5
m
37.5 mm
Measure T
C a t this point
(geometric center of the package)
3
7
.5
m
相關PDF資料
PDF描述
BXM80526B600128 64-BIT, 600 MHz, MICROPROCESSOR, PBGA495
BXM80526B700128 64-BIT, 700 MHz, MICROPROCESSOR, CPGA495
BXM80526B700 64-BIT, 700 MHz, MICROPROCESSOR, CPGA495
BXM80536GC2100F 32-BIT, 2100 MHz, MICROPROCESSOR, CPGA478
BXM80536GC1800F 32-BIT, 1800 MHz, MICROPROCESSOR, CPGA478
相關代理商/技術參數
參數描述
BX80557E2160 S LA8Z 制造商:Intel 功能描述:
BX80557E4400 制造商:Intel 功能描述:MPU Core?2 Duo Processor E4400 65nm 2GHz 775-Pin FCLGA6
BX80557E4500 S LA95 制造商:Intel 功能描述:MPU Core?2 Duo Processor E4500 65nm 2.2GHz 775-Pin FCLGA6
BX80557E4600 S LA94 制造商:Intel 功能描述:MPU Core?2 Duo Processor E4600 65nm 2.4GHz 775-Pin FCLGA6
BX80557E6300 制造商:Rochester Electronics LLC 功能描述: 制造商:Intel 功能描述: