參數資料
型號： TDA8035HN/C1
廠商： NXP SEMICONDUCTORS
元件分類： 模擬信號調理
英文描述： SPECIALTY ANALOG CIRCUIT, PQCC32
封裝： 5 X 5 MM, 0.85 MM HEIGHT, PLASTIC, SOT617-7, HVQFN-32
文件頁數： 30/32頁
文件大?。?/td> 908K
代理商： TDA8035HN/C1
TDA8035HN
All information provided in this document is subject to legal disclaimers.
NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 1.0 — 19 April 2011
7 of 32
NXP Semiconductors
TDA8035HN
Smart card interface
8.
Functional description
Remark: Throughout this document the ISO 7816 terminology conventions have been
adhered to and it is assumed that the reader is familiar with these.
8.1 Power Supply
Power supply voltage VDDP should be in the range from 2.7 to 5.5 V
All interface signals with the system controller are referenced to VDD(INTF). All card
contacts remain inactive during powering up or powering down.
Internal regulator VREG should be in the range of 1.8 V
After powering the device, OFFN remains Low until CMDVCCN is set High and PRESN is
Low .
During power off, OFFN falls Low when VDDP is below the threshold voltage falling.
The frequency of the internal oscillator Foscint used for the activation sequences is put in
low frequency mode in order to save power consumption as long as CMDVCCN is kept at
high level (card not activated).
This device includes DC/DC converter to generate the 5 V, 3 V or 1.8 V card supply
voltage (Vcc). The DC/DC converter should be supplied separately by Vddp and Gndp.
The DC/DC converter operates as a voltage tripler, doubler or follower according to the
respective values of Vcc and Vddp.
The operating mode is as follows (see Figure 3):
Vcc = 5 V & Vddp > 3.8 V ; voltage doubler
Vcc = 5 V & Vddp < 3.6 V; voltage tripler
Vcc = 3 V & Vddp > 3.8 V; voltage follower
Vcc = 3 V & Vddp < 3.6 V; voltage doubler
Vcc = 1.8 V & Vddp > 3.8 V; voltage doubler
Vcc = 1.8 V & Vddp < 3.6 V; voltage tripler
相關PDF資料
PDF描述
TDA8779H-T SPECIALTY ANALOG CIRCUIT, PQFP44
TEA1103N 0.014 A BATTERY CHARGE CONTROLLER, 200 kHz SWITCHING FREQ-MAX, PDIP20
TEA1103TD 0.014 A BATTERY CHARGE CONTROLLER, 200 kHz SWITCHING FREQ-MAX, PDSO20
TEA1610T/N5,118 SWITCHING CONTROLLER, 550 kHz SWITCHING FREQ-MAX, PDSO16
TEA1733LT/N1 SWITCHING CONTROLLER, 71 kHz SWITCHING FREQ-MAX, PDSO8
相關代理商/技術參數
參數描述
TDA8037T/C1J 制造商:NXP Semiconductors 功能描述:TDA8037T/SO28/REEL13//C1 - Tape and Reel
TDA8037TT/C1J 制造商:NXP Semiconductors 功能描述:TDA8037TT/TSSOP16/REEL13//C1 - Tape and Reel
TDA8040T 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Quadrature demodulator
TDA8041H 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Quadrature demodulator controller
TDA8041HB-S 制造商:未知廠家 制造商全稱:未知廠家 功能描述:ASK/FSK Demodulator
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*