48
AMCC Proprietary
440EP – PPC440EP Embedded Processor
Revision 1.26 – April 25, 2007
Data Sheet
Signal Descriptions
The PPC440EP embedded controller is packaged in a 456-ball enhanced plastic ball grid array (E-PBGA). The
following tables describe the package level pinout.
In the table “Signal Functional Description” on page 50, each I/O signal is listed along with a short description of its
function. Active-low signals (for example, RAS) are marked with an overline. Please see “Signals Listed
Alphabetically” on page 17 for the pin (ball) number to which each signal is assigned.
Multiplexed Signals
Some signals are multiplexed on the same pin so that the pin can be used for different functions. In most cases,
the signal names shown in this table are not accompanied by signal names that may be multiplexed on the same
pin. If you need to know what, if any, signals are multiplexed with a particular signal, look up the name in “Signals
Listed Alphabetically” on page 17. It is expected that in any single application a particular pin will always be
programmed to serve the same function. The flexibility of multiplexing allows a single chip to offer a richer pin
selection than would otherwise be possible. The circuit type for multiplexed signals is shown as “Multiplex.” The
actual circuit type is the same as the primary signal.
Multipurpose Signals
In addition to multiplexing, some pins are also multi-purpose. For example, the EBC peripheral controller address
pins (PerAddr) are used as outputs by the PPC440EP to broadcast an address to external slave devices when the
PPC440EP has control of the external bus. When during the course of normal chip operation an external master
gains ownership of the external bus, these same pins are used as inputs which are driven by the external master
and received by the EBC in the PPC440EP. In this example, the pins are also bidirectional, serving both as inputs
and outputs.
Table 5. Pin Summary
Group
No. of Pins
Total Signal Pins
304
AV
DD
1
SAV
DD
1
SAGnd
1
AGnd
1
OV
DD
18
SV
DD
18
V
DD
32
Gnd
80
Total Power Pins
152
Reserved
0
Total Pins
456