參數資料
型號： M37640E8FP
元件分類： 微控制器/微處理器
英文描述： 8-BIT, OTPROM, 24 MHz, MICROCONTROLLER, PQFP80
封裝： 14 X 20 MM, 0.80 MM PITCH, PLASTIC, QFP-80
文件頁數： 35/96頁
文件大?。?/td> 1477K
代理商： M37640E8FP
40
Ver 1.4
MITSUBISHI MICROCOMPUTERS
7640 Group
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
1.18.3 SPI Compatible Operation
Setting the SPI bit (bit 0 in SIOCON2) puts the SIO in
an SPI compatible mode. The internal/external clock
select bit (bit 6 in SIOCON1) determines whether the
SIO is an SPI master or slave. If internal clock is se-
lected the SIO is a master, and if external clock is
selected the SIO is in slave mode.
Entering SPI mode has the following effects on opera-
tion:
1. The RxD pin functions as a MISO (Master In/Slave
Out) pin. This means that when the SPI is in slave
mode transmit data will be output on this pin. In mas
ter mode receive data is input on this pin.
2. The TxD pin functions as a MOSI (Master Out/Slave
In) pin. When the SPI is in slave mode receive data is
input on this pin. In master mode this pin drives the
transmit data.
3. The SRDY pin functions as a slave/chip select. If the
SPI is in slave mode, this pin functions as a slave se
lect input. When configured as an SPI master, the
SRDY pin functions as a chip select output.
Figure 1.40 shows the four possible SPI clock-to-data
relationships.
The CPol and CPha bits (bits 3 and 4 in SIOCON2)
are used to select the format.
1.18.3.1 SPI Slave Mode
When configured as an SPI slave the SIO does not
initiate any serial transfers. All transfers are initiated
by an external SPI bus master. When the CPha (bit 4
in SIOCON2) is “0” serial transfers begin with the fall-
ing edge of the SRDY input. For CPha = “1” serial
transfers begin when the SCLK leaves its idle state
(the clock idle state is defined by CPol, bit 3 in
SIOCON2).
If SRDY is held high, the shift clock is inhibited, SRXD
(MISO) is tri-stated, and the shift count is reset. If
SRDY is held low, then the shift operation is per-
formed. The SRDY input must be deasserted
(brought high) between transfers; this resets the
SIO’s internal bit counter.
When the SIO is in SPI slave mode, all transfers are
initiated by an external SPI bus master, not by the
MCU. Therefore, an application must implement
some form of handshaking or synchronization to
avoid writing to the SIO shift register during a serial
transfer. Writing to the SIO shift register during a
transfer will corrupt the transfer in progress.
SCLK
First bit
Last bit
SCLK
SRDY
TxD/RxD
Arrows indicate edge when data is captured
CPol = 1
CPha = 1
CPol = 0
CPha = 1
CPol = 1
CPha = 0
CPol = 0
CPha
0
Fig. 1.40. SPI Compatible Transmission Formats
相關PDF資料
PDF描述
M37643M8-XXXHP 8-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80
M37643F8HP 8-BIT, FLASH, 12 MHz, MICROCONTROLLER, PQFP80
M37700E2AFS 16-BIT, UVPROM, 16 MHz, MICROCONTROLLER, CQCC80
M37700E2AXXXFP 16-BIT, OTPROM, 16 MHz, MICROCONTROLLER, PQFP80
M37701E2-XXXSP 16-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PDIP64
相關代理商/技術參數
參數描述
M37640E8FS 功能描述:EPROM MCU/8BIT CMOS EMULATION CH RoHS:否 類別:編程器，開發系統 >> 配件 系列:- 標準包裝:1 系列:- 附件類型:適配器板 適用于相關產品:RCB230，RCB231，RCB212 配用:26790D-ND - RCB BREAKOUT BOARD RS232 CABLE
M37640M4T 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37640M8-111FP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37640M8-126FP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37640M8-XXXFP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE CHIP 8 BIT CMOS MICROCOMPUTER
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*