參數資料
型號: AM79C940JCW
廠商: Advanced Micro Devices, Inc.
英文描述: Media Access Controller for Ethernet (MACE)
中文描述: 媒體訪問控制器(MACE發生以太網)
文件頁數: 69/122頁
文件大?。?/td> 914K
代理商: AM79C940JCW
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁當前第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁第105頁第106頁第107頁第108頁第109頁第110頁第111頁第112頁第113頁第114頁第115頁第116頁第117頁第118頁第119頁第120頁第121頁第122頁
AMD
69
Am79C940
RES
RES RES
RES
RES
ADDRCHG
PHYADDR
LOGADDR
Bit
Name
Description
Bit 7
ADDRCHG Address Change. When set, al-
lows the physical and/or logical
address to be read or pro-
grammed. When ADDRCHG is
set, ENRCV will be cleared, the
MPC will be stopped, and the last
or current in progress receive
frame will be received as normal.
After the frame completes, ac-
cess to the internal address RAM
will be permitted, indicated by the
MACE
device
ADDRCHG bit. Please refer to
the register description of the
ENRCV bit in the MAC Configu-
ration Control register (REG
ADDR 13) for the effect of clear-
ing the ENRCV bit. Normal re-
ception can be resumed once the
physical/logical
been
changed,
ENRCV.
Bit 6–3 RES
Reserved. Read as zeroes.
Always write as zeroes.
Bit 2
PHYADDR Physical Address Reset. When
set, successive reads or writes to
the Physical Address Register
will occur in the order PADR
[07–00],
PADR [47–40]. Each read or
write operation on the PADR lo-
cation will auto-increment the in-
ternal pointer to access the next
most significant byte.
Bit 1
LOGADDR Logical Address Reset. When
set, successive reads or writes to
the Logical Address Filter will oc-
cur in the order LADRF [07–00],
LADRF
[63–56]. Each read or write op-
eration on the LADRF location
will auto-increment the internal
pointer to access the next most
significant byte.
Bit 0
RES
Reserved. Read as zero. Always
write as zero.
clearing
the
address
by
has
setting
PADR
[15–08],....,
[15–08],....,LADRF
Logical Address Filter
(LADRF [63–00])
(REG ADDR 20)
LADRF [63–00]
This 64-bit mask is used to accept incoming Logical Ad-
dresses. The Logical Address Filter is expected to be
programmed at initialization (after hardware or software
reset). After a hardware or software reset and before the
ENRCV bit in the MAC Configuration Control register
has been set, the Logical Address can be accessed by
setting the LOG ADDR bit in the Internal Address Con-
figuration register (REG ADDR 18) and then by perform-
ing 8 reads or writes to the Logical Address Filter. Once
ENRCV has been set, the ADDR CHG bit in the Internal
Address Configuration register must be set and be
polled until it is cleared by the MACE device before set-
ting the LOGADDR bit and before accessing of the Logi-
cal Address Filter is allowed.
If the least significant address bit of a received message
is set (Destination Address bit 00 = 1), then the address
is deemed logical, and passed through the FCS genera-
tor. After processing the 48-bit destination address, a
32-bit resultant FCS is produced and strobed into an in-
ternal register. The high order 6-bits of this resultant
FCS are used to select one of the 64-bit positions in the
Logical Address Filter (see diagram). If the selected fil-
ter bit is a 1 the address is accepted and the packet will
be placed in memory.
The first bit of the incoming address must be a 1for a
logical address. If the first bit is a 0 it is a physical ad-
dress and is compared against the value stored in the
Physical Address Register at initialization.
The Logical Address Filter is used in multicast address-
ing schemes. The acceptance of the incoming frame
based on the filter value indicates that the message may
be intended for the node. It is the user’s responsibility to
determine if the message is actually intended for the
node by comparing the destination address of the stored
message with a list of acceptable logical addresses.
The Broadcast address, which is all ones, does not go
through the Logical Address Filter and is always en-
abled providing that the Disable Receive Broadcast bit
(DRCVBC in the MAC Configuration Control register) is
cleared. If the Logical Address Filter is loaded with all
zeroes (and PROM = 0), all incoming logical addresses
except broadcast will be rejected.
Multicast addressing can only be performed when using
external loopback (LOOP [1–0] = 0) by programming
RCVFCSE = 1 in the User Test Register. The FCS logic
is internally allocated to the receiver section, allowing
the FCS to be computed on the incoming logical
address.
相關PDF資料
PDF描述
AM79C940KCW Media Access Controller for Ethernet (MACE)
AM79C960 PCnetTM-ISA Single-Chip Ethernet Controller
AM79C960KC PCnetTM-ISA Single-Chip Ethernet Controller
AM79C960KCW PCnetTM-ISA Single-Chip Ethernet Controller
AM79C961AKCW PCnet ⑩-ISA II Jumperless, Full Duplex Single-Chip Ethernet Controller for ISA
相關代理商/技術參數
參數描述
AM79C940JI 制造商:未知廠家 制造商全稱:未知廠家 功能描述:LAN Node Controller
AM79C940JI/W 制造商:AMD 制造商全稱:Advanced Micro Devices 功能描述:Media Access Controller for Ethernet (MACE⑩)
AM79C940KC 制造商:未知廠家 制造商全稱:未知廠家 功能描述:LAN Node Controller
AM79C940KC/W 制造商:AMD 制造商全稱:Advanced Micro Devices 功能描述:Media Access Controller for Ethernet (MACE⑩)
AM79C940KCW 制造商:AMD 制造商全稱:Advanced Micro Devices 功能描述:Media Access Controller for Ethernet (MACE)