- 您現在的位置：買賣IC網 > PDF目錄366550 > AM79C940JCW (Advanced Micro Devices, Inc.) Media Access Controller for Ethernet (MACE) PDF資料下載
參數資料
| 型號： | AM79C940JCW |
| 廠商： | Advanced Micro Devices, Inc. |
| 英文描述： | Media Access Controller for Ethernet (MACE) |
| 中文描述： | 媒體訪問控制器（MACE發生以太網） |
| 文件頁數： | 52/122頁 |
| 文件大?。?/td> | 914K |
| 代理商： | AM79C940JCW |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁當前第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁第70頁第71頁第72頁第73頁第74頁第75頁第76頁第77頁第78頁第79頁第80頁第81頁第82頁第83頁第84頁第85頁第86頁第87頁第88頁第89頁第90頁第91頁第92頁第93頁第94頁第95頁第96頁第97頁第98頁第99頁第100頁第101頁第102頁第103頁第104頁第105頁第106頁第107頁第108頁第109頁第110頁第111頁第112頁第113頁第114頁第115頁第116頁第117頁第118頁第119頁第120頁第121頁第122頁
AMD
52
Am79C940
(nominal 10 MHz sequence) to be returned via the CI
±
pair, within a 40 network bit time period after DI
±
goes
inactive. If the CI
±
input is not asserted within the 40 net-
work bit time period following the completion of trans-
mission, then the MACE device will set the CERR bit (bit
5) in the Interrupt Register. The
INTR
pin will be acti-
vated if the corresponding mask bit CERRM = 0.
When the GPSI port is selected, the MACE device will
expect the CLSN input pin to be asserted 40 bit times af-
ter the transmission has completed (after TXEN output
pin has gone inactive). When the DAI port has been se-
lected, the CERR bit will not be reported. A transceiver
connected via the DAI port is not expected to support
the SQE Test Message feature.
Host related transmit exception conditions include:
(a) Overflow caused by excessive writes to the Trans-
mit FIFO (
DTV
will not be issued if the Transmit
FIFO is full).
(b) Underflow caused by lack of host writes to the
Transmit FIFO.
(c) Not reading current Transmit Frame Status.
(a) The host may continue to write to the Transmit FIFO
after the
TDTREQ
has been de-asserted, and can safely
do so on the basis of knowledge of the number of free
bytes remaining (set by XMTFW in the FIFO
Configuration Control register). If however the host sys-
tem continues to write data to the point that no additional
FIFO space exists, the MACE device will not return the
DTV
signal and hence will effectively not acknowledge
acceptance of the data. It is the host’s responsibility to
ensure that the data is re-presented at a future time
when space exists in the Transmit FIFO, and to track the
actual data written into the FIFO.
(b) If the host fails to respond to the
TDTREQ
from the
MACE device before the Transmit FIFO is emptied, a
FIFO underrun will occur. The MACE device will in this
case terminate the network transmission in an orderly
sequence. If less than 512 bits have been transmitted
onto the network the transmission will be terminated im-
mediately, generating a runt packet. If greater than 512
bits have been transmitted, the message will have the
current CRC inverted and appended at the next byte
boundary, to guarantee an FCS error is detected at the
receiving station. The MACE device will report this con-
dition to the host by de-asserting the
TDTREQ
pin, set-
ting the UFLO and XMTSV bits (in the Transmit Frame
Status) and the XMTINT bit (in the Interrupt Register),
and asserting the
INTR
pin providing the corresponding
XMTINTM bit (in the Interrupt Mask Register) is cleared.
Once the XMTINT condition has been externally recog-
nized, the Transmit Frame Counter (XMTFC) can be
read to determine whether the tail end of the frame that
suffers the UFLO error is still in the host memory (i.e.,
when XMTFC = 0). In the case of FIFO underrun, this
will definitely be the case and the host is responsible for
ensuring that the tail end of the frame does not get writ-
ten into the FIFO and does not get transmitted as a
whole frame. It is recommended that the host clear the
tail end of the frame from the host memory before re-
questing the XMTFS read so that after the XMTFS read,
when the MACE device re-asserts
TDTREQ
, the tail end
of the frame does not get written into the FIFO. The
Transmit Frame Status read will indicate that the UFLO
error occurred. The read operation on the Transmit
Frame Status will update the FIFO read and write point-
ers and the entire transmit path will be reset (which will
update the Transmit FIFO watermark with the current
XMTFW value in the FIFO Configuration Control regis-
ter).
TDTREQ
will not be re-asserted until the Transmit
Frame Status has been read.
(c) The MACE device will internally store the Transmit
Frame Status for up to two packets. If the host fails to
read the Transmit Frame Status and both internal
entries become occupied, the MACE device will not
commence any subsequent transmit frames to prevent
overwriting of the internally stored values. This will
occur regardless of the number of bytes written to the
Transmit FIFO.
RECEIVE OPERATION
The receive operation and features of the MACE device
are controlled by programmable options. These options
are programmed through the BIU, FIFO and MAC Con-
figuration Control registers.
Parameters controlled by the MAC Configuration Con-
trol register are generally programmed only once, dur-
ing initialization, and are therefore static during the
normal operation of the MACE device (see the Media
Access Control section for a detailed description). The
features controlled by the FIFO Configuration Control
register and the Receive Frame Control register can be
programmed without performing a reset on the part. The
host is responsible for ensuring that no data is present in
the Receive FIFO when re-programming the receive
attributes.
Receive FIFO Read
The Receive FIFO is accessed by performing a host
generated read sequence on the MACE device. See the
Slave Access Operation-Read Access section and the
AC Waveforms section, Host System Interface, figures:
”2 Cycle Receive FIFO/Register Read Timing” and ”3
Cycle Receive FIFO/Register Read Timing” for details
of the read access timing.
Note that
EOF
will be asserted by the MACE device dur-
ing the last data byte/word transfer.
相關PDF資料 |
PDF描述 |
|---|---|
| AM79C940KCW | Media Access Controller for Ethernet (MACE) |
| AM79C960 | PCnetTM-ISA Single-Chip Ethernet Controller |
| AM79C960KC | PCnetTM-ISA Single-Chip Ethernet Controller |
| AM79C960KCW | PCnetTM-ISA Single-Chip Ethernet Controller |
| AM79C961AKCW | PCnet ⑩-ISA II Jumperless, Full Duplex Single-Chip Ethernet Controller for ISA |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AM79C940JI | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:LAN Node Controller |
| AM79C940JI/W | 制造商:AMD 制造商全稱:Advanced Micro Devices 功能描述:Media Access Controller for Ethernet (MACE⑩) |
| AM79C940KC | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:LAN Node Controller |
| AM79C940KC/W | 制造商:AMD 制造商全稱:Advanced Micro Devices 功能描述:Media Access Controller for Ethernet (MACE⑩) |
| AM79C940KCW | 制造商:AMD 制造商全稱:Advanced Micro Devices 功能描述:Media Access Controller for Ethernet (MACE) |
發布緊急采購，3分鐘左右您將得到回復。