參數資料
型號: ADV7188
廠商: Analog Devices, Inc.
英文描述: Multiformat SDTV Video Decoder with Fast Switch Overlay Support
中文描述: 標清多格式視頻解碼器支持快速開關重疊
文件頁數: 20/112頁
文件大小: 943K
代理商: ADV7188
ADV7188
Three-State LLC Drivers
TRI_LLC, Address 0x1D [7]
This bit allows the output drivers for the LLC1 and LLC2 pins
of the ADV7188 to be three-stated. For more information on
three-state control, refer to the Three-State Output Drivers and
the Timing Signals Output Enable sections. Individual drive
strength controls are provided via the DR_STR_XX bits.
Rev. 0 | Page 20 of 112
0 (default)—The LLC pin drivers work according to the
DR_STR_C[1:0] setting (pin enabled).
1—The LLC pin drivers are three-stated.
Timing Signals Output Enable
TIM_OE, Address 0x04 [3]
The TIM_OE bit should be regarded as an addition to the TOD
bit. Setting it high forces the output drivers for HS, VS, and
FIELD into the active (that is, driving) state even if the TOD bit
is set. If set to low, the HS, VS, and FIELD pins are three-stated
dependent on the TOD bit. This functionality is useful if the
decoder is to be used as a timing generator only. This may be
the case if only the timing signals are to be extracted from an
incoming signal, or if the part is in free-run mode where, for
example, a separate chip can output a company logo. For more
information on three-state control, refer to the Three-State
Output Drivers and the Three-State LLC Drivers sections.
Individual drive strength controls are provided via the
DR_STR_XX bits.
0 (default)—HS, VS, and FIELD are three-stated according to
the TOD bit.
1—HS, VS, and FIELD are forced active all the time.
Drive Strength Selection (Data)
DR_STR[1:0], Address 0xF4 [5:4]
For EMC and crosstalk reasons, it may be desirable to
strengthen or weaken the drive strength of the output drivers.
The DR_STR[1:0] bits affect the P[19:0] output drivers.
For more information on three-state control, refer to the Drive
Strength Selection (Clock) and the Drive Strength Selection
(Sync) sections.
Table 17. DR_STR_C Function
DR_STR_C[1:0]
Description
01 (default)
Medium low drive strength (2×).
10
Medium high drive strength (3×).
11
High drive strength (4×).
Drive Strength Selection (Clock)
DR_STR_C[1:0] Address 0xF4 [3:2]
The DR_STR_C[1:0] bits can be used to select the strength of
the clock signal output driver (LLC pin). For more information,
refer to the Drive Strength Selection (Sync) and the Drive
Strength Selection (Data) sections.
Table 18. DR_STR_C Function
DR_STR_C[1:0]
Description
01 (default)
Medium low drive strength (2×).
10
Medium high drive strength (3×).
11
High drive strength (4×).
Drive Strength Selection (Sync)
DR_STR_S[1:0], Address 0xF4 [1:0]
The DR_STR_S[1:0] bits allow the user to select the strength of
the synchronization signals with which HS, VS, and F are driven.
For more information, refer to the Drive Strength Selection
(Clock) and the Drive Strength Selection (Data) sections.
Table 19. DR_STR_S Function
DR_STR_S[1:0]
Description
01 (default)
Medium low drive strength (2×).
10
Medium high drive strength (3×).
11
High drive strength (4×).
Enable Subcarrier Frequency Lock Pin
EN_SFL_PIN, Address 0x04 [1]
The EN_SFL_PIN bit enables the output of subcarrier lock
information (also known as GenLock) from the ADV7188 core
to an encoder in a decoder-encoder back-to-back arrangement.
0 (default)—The subcarrier frequency lock output is disabled.
1—The subcarrier frequency lock information is presented on
the SFL pin.
Polarity LLC Pin
PCLK, Address 0x37 [0]
The polarity of the clock that leaves the ADV7188 via the LLC1
and LLC2 pins can be inverted using the PCLK bit. Changing
the polarity of the LLC clock output may be necessary to meet
the setup-and-hold time expectations of follow-on chips. This
bit also inverts the polarity of the LLC2 clock.
0—The LLC output polarity is inverted.
1 (default)—The LLC output polarity is normal (as per the
timing diagrams).
相關PDF資料
PDF描述
ADV7189B Multiformat SDTV Video Decoder
ADV7189BBSTZ268H Multiformat SDTV Video Decoder
ADV7189BKSTZ10F Multiformat SDTV Video Decoder
ADV7189 Multiformat SDTV Video Decoder
ADV7189KST Multiformat SDTV Video Decoder
相關代理商/技術參數
參數描述
ADV7188BSTZ 功能描述:IC DECODER VID MULTIFORM 80LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 編碼器,解碼器,轉換器 系列:- 產品變化通告:Development Systems Discontinuation 26/Apr/2011 標準包裝:1 系列:- 類型:編碼器 應用:DVB-S.2 系統 電壓 - 電源,模擬:- 電壓 - 電源,數字:- 安裝類型:- 封裝/外殼:模塊 供應商設備封裝:模塊 包裝:散裝 其它名稱:Q4645799
ADV7189 制造商:AD 制造商全稱:Analog Devices 功能描述:Multiformat SDTV Video Decoder
ADV7189B 制造商:AD 制造商全稱:Analog Devices 功能描述:Multiformat SDTV Video Decoder
ADV7189BBSTZ 功能描述:IC VIDEO DECODER SDTV 80-LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 編碼器,解碼器,轉換器 系列:- 產品變化通告:Development Systems Discontinuation 26/Apr/2011 標準包裝:1 系列:- 類型:編碼器 應用:DVB-S.2 系統 電壓 - 電源,模擬:- 電壓 - 電源,數字:- 安裝類型:- 封裝/外殼:模塊 供應商設備封裝:模塊 包裝:散裝 其它名稱:Q4645799
ADV7189BBSTZ268H 制造商:AD 制造商全稱:Analog Devices 功能描述:Multiformat SDTV Video Decoder