參數資料
型號： ADUC7061BCPZ32-RL
廠商： Analog Devices Inc
文件頁數： 46/108頁
文件大?。?/td> 0K
描述： IC MCU 16/32BIT 32KB 32LFCSP
產品變化通告： ADuC7060/1 Idd Specification Change 01/Feb/2010
設計資源： USB Based Temperature Monitor Using ADuC7061 and an External RTD (CN0075)
4 mA-to-20 mA Loop-Powered Temperature Monitor Using ADuC7060/1 (CN0145)
標準包裝： 5,000
系列： MicroConverter® ADuC7xxx
核心處理器： ARM7
芯體尺寸： 16/32-位
速度： 10MHz
連通性： I²C，SPI，UART/USART
外圍設備： POR，PWM，溫度傳感器，WDT
輸入/輸出數： 8
程序存儲器容量： 32KB（16K x 16）
程序存儲器類型： 閃存
RAM 容量： 1K x 32
電壓 - 電源 (Vcc/Vdd)： 2.375 V ~ 2.625 V
數據轉換器： A/D 5x24b，8x24b，D/A 1x14b
振蕩器型： 內部
工作溫度： -40°C ~ 125°C
封裝/外殼： 32-VFQFN 裸露焊盤，CSP
包裝： 帶卷 (TR)
ADuC7060/ADuC7061
Data Sheet
Rev. D | Page 42 of 108
Table 40. ADCSTA MMR Bit Designations
Bit
Name
Description
15
ADCCALSTA
ADC calibration status.
This bit is set automatically in hardware to indicate that an ADC calibration cycle has been completed.
This bit is cleared after ADCMDE is written to.
14
Not used.
This bit is reserved for future functionality.
13
ADC1CERR
Auxiliary ADC conversion error.
This bit is set automatically in hardware to indicate that an auxiliary ADC conversion overrange or underrange has
occurred. The conversion result is clamped to negative full scale (underrange error) or positive full scale (overrange
error) in this case.
This bit is cleared when a valid (in-range) voltage conversion result is written to the ADC1DAT register.
12
ADC0CERR
Primary ADC conversion error.
This bit is set automatically in hardware to indicate that a primary ADC conversion overrange or underrange has
occurred. The conversion result is clamped to negative full scale (underrange error) or positive full scale (overrange
error) in this case.
This bit is cleared when a valid (in-range) conversion result is written to the ADC0DAT register.
11:7
Not used. These bits are reserved for future functionality and should not be monitored by user code.
6
ADC0ATHEX
ADC0 accumulator comparator threshold exceeded.
This bit is set when the ADC0 accumulator value in ADC0ACC exceeds the threshold value programmed in the ADC0
comparator threshold register, ADC0ATH.
This bit is cleared when the value in ADC0ACC does not exceed the value in ADC0ATH.
5
Not used. This bit is reserved for future functionality and should not be monitored by user code.
4
ADC0THEX
Primary channel ADC comparator threshold. This bit is valid only if the primary channel ADC comparator is enabled
via the ADCCFG MMR.
This bit is set by hardware if the absolute value of the primary ADC conversion result exceeds the value written in the
ADC0TH MMR. If the ADC threshold counter is used (ADC0RCR), this bit is set only when the specified number of
primary ADC conversions equals the value in the ADC0THV MMR.
Otherwise, this bit is cleared.
3
ADC0OVR
Primary channel ADC overrange bit. If the overrange detect function is enabled via the ADCCFG MMR, this bit is set by
hardware if the primary ADC input is grossly (>30% approximate) overrange. This bit is updated every 125 s. After it
is set, this bit can be cleared only by software when ADCCFG[2] is cleared to disable the function, or the ADC gain is
changed via the ADC0CON MMR.
2
Not used. This bit is reserved for future functionality and should not be monitored by user code.
1
ADC1RDY
Auxiliary ADC result ready bit.
If the auxiliary channel ADC is enabled, this bit is set by hardware as soon as a valid conversion result is written in the
ADC1DAT MMR. It is also set at the end of a calibration sequence.
This bit is cleared by reading ADC1DAT followed by reading ADC0DAT. ADC0DAT must be read to clear this bit, even if
the primary ADC is not enabled.
0
ADC0RDY
Primary ADC result ready bit.
If the primary channel ADC is enabled, this bit is set by hardware as soon as a valid conversion result is written in the
ADC0DAT MMR. It is also set at the end of a calibration sequence.
This bit is cleared by reading ADC0DAT.
相關PDF資料
PDF描述
VI-B2L-IW-F4 CONVERTER MOD DC/DC 28V 100W
ATMEGA8535L-8JU MCU AVR 8K ISP FLASH MEM 44-PLCC
VI-B2L-IW-F3 CONVERTER MOD DC/DC 28V 100W
ATMEGA8535L-8PU IC AVR MCU 8K 8MHZ 3V 40DIP
VI-B2L-IW-F2 CONVERTER MOD DC/DC 28V 100W
相關代理商/技術參數
參數描述
ADUC70SMARTLINKRL7 制造商:Analog Devices 功能描述:
ADUC70TEL 制造商:Analog Devices 功能描述:FLASH ARM +5-CH 12BIT ADC - Trays
ADUC70TEL-RL7 制造商:Analog Devices 功能描述:
ADUC7120BBCZ 制造商:Analog Devices 功能描述:- Rail/Tube
ADUC7120BBCZ-RL 制造商:Analog Devices 功能描述:- Tape and Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*