參數資料
型號： PD6710
廠商： Intel Corp.
英文描述： ISA-to-PC-Card (PCMCIA) Controllers
中文描述： ISA -到- PC卡（PCMCIA）的控制器
文件頁數： 33/138頁
文件大?。?/td> 723K
代理商： PD6710
ISA-to-PC-Card (PCMCIA) Controllers
—
PD6710/
’
22
Datasheet
33
Low-Power Dynamic mode is transparent to the ISA bus. After reset, the PD67XX is configured
for Low-Power Dynamic mode. This mode can be turned off by setting
Misc Control 2
register,
bit 1 to
‘
0
’
. When in Low-Power Dynamic mode, periods of inactivity (no activity on the PC Card
bus and system accesses to chip registers or inserted cards are no longer being performed) cause
the PD67XX to enter a low-power state where the clock is turned off to most of the chip and the PC
Card address and data lines are set to a static value. V
CC
and V
PP
power to the card is left
unchanged. When there is activity present on the PC Card bus, or the system accesses PD67XX
registers, or PC Cards are inserted or removed from the socket, the PD67XX enters its active state,
services the transaction, and then returns to its low-power state.
A Suspend mode can also be programmed. The PD67XX Suspend mode is the chip
’
s lowest
software-controlled power mode. The PD67XX is put into Suspend mode by setting the
Misc
Control 2
register, bit 2 to
‘
1
’
. In Suspend mode, all the internal clocks are turned off, and only
read/write access to the
Index
register and write access to the
Misc Control 2
register is supported.
All accesses to the PC Cards are ignored when in Suspend mode. V
CC
and V
PP
power to the card is
left unchanged (the system power management software is responsible for turning off power to the
socket and entering Suspend mode). Interrupts and ring indicate signals are passed through to the
system bus when in Suspend mode. To exit Suspend mode, the
Misc Control 2
register bit 2 must
be reset to
‘
0
’
. It requires 50 ms for the PD67XX to restart the internal clock synthesizer and
become active again.
In addition to the software suspend, if the system hold
’
s the AEN signal of the PD67XX high, a
hardware-assisted Super-Suspend mode occurs where ISA inputs to the chip are internally shut off.
Internal in the PD67XX, the ISA inputs are ignored and floating conditions on the ISA bus will not
cause high current flow in the PD67XX ISA input receivers. Since the ISA bus inputs to the core
logic of the PD67XX are also not toggling when AEN is set high, power consumption is further
reduced. Interrupts and ring indicate signals are passed through to the system bus when in Super-
Suspend mode
The PD67XX power can be further managed by controlling socket power as outlined in
“
Socket
Power Management Features
”
on page 34
. Socket power can be turned on and off through software
or automatically when cards are inserted or removed. The PD67XX provides six pins per socket for
controlling external logic to switch V
CC
and V
PP
voltages on and off and for sensing a card
’
s
operating voltage range. Cards can be turned off when not in use.
相關PDF資料
PDF描述
PD7-20-70A Analog IC
PD7-80-70A Analog IC
PD7-40-70A Analog IC
PD700A7 Optoelectronic
PDA2446-B-AP Analog Pigtailed PIN Photodiodes
相關代理商/技術參數
參數描述
PD67108AM 制造商:MICROSEMI 制造商全稱:Microsemi Corporation 功能描述:24-Channel PoE AF and AT DIMM
PD67108MAC-0212 制造商:Microsemi Corporation 功能描述:POE PSE MODULES - Bulk
PD67108MAC-GGGG 制造商:MICROSEMI 制造商全稱:Microsemi Corporation 功能描述:24-Channel PoE AF and AT DIMM
PD67108MDC-0212 制造商:Microsemi Corporation 功能描述:POE PSE MODULES - Bulk
PD67108MDC-GGGG 制造商:MICROSEMI 制造商全稱:Microsemi Corporation 功能描述:24-Channel PoE AF and AT DIMM
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*