參數資料
型號： M29DW640F70N6F
廠商： STMICROELECTRONICS
元件分類： PROM
英文描述： 4M X 16 FLASH 3V PROM, 70 ns, PDSO48
封裝： 12 X 20 MM, LEAD FREE, PLASTIC, TSOP-48
文件頁數： 27/74頁
文件大?。?/td> 556K
代理商： M29DW640F70N6F
M29DW640F
Status register
5.1.2
Error Bit (DQ5)
The Error Bit can be used to identify errors detected by the Program/Erase Controller. The
Error Bit is set to ’1’ when a Program, Block Erase or Chip Erase operation fails to write the
correct data to the memory. If the Error Bit is set a Read/Reset command must be issued
before other commands are issued. The Error bit is output on DQ5 when the Status Register
is read.
Note that the Program command cannot change a bit set to ’0’ back to ’1’ and attempting to
do so will set DQ5 to ‘1’. A Bus Read operation to that address will show the bit is still ‘0’.
One of the Erase commands must be used to set all the bits in a block or in the whole
memory from ’0’ to ’1’.
5.1.3
Erase Timer Bit (DQ3)
The Erase Timer Bit can be used to identify the start of Program/Erase Controller operation
during a Block Erase command. Once the Program/Erase Controller starts erasing the
Erase Timer Bit is set to ’1’. Before the Program/Erase Controller starts the Erase Timer Bit
is set to ’0’ and additional blocks to be erased may be written to the Command Interface.
The Erase Timer Bit is output on DQ3 when the Status Register is read.
5.1.4
Alternative Toggle Bit (DQ2)
The Alternative Toggle Bit can be used to monitor the Program/Erase controller during
Erase operations. The Alternative Toggle Bit is output on DQ2 when the Status Register is
read.
During Chip Erase and Block Erase operations the Toggle Bit changes from ’0’ to ’1’ to ’0’,
etc., with successive Bus Read operations from addresses within the blocks being erased. A
protected block is treated the same as a block not being erased. Once the operation
completes the memory returns to Read mode.
During Erase Suspend the Alternative Toggle Bit changes from ’0’ to ’1’ to ’0’, etc. with
successive Bus Read operations from addresses within the blocks being erased. Bus Read
operations to addresses within blocks not being erased will output the memory cell data as if
in Read mode.
After an Erase operation that causes the Error Bit to be set the Alternative Toggle Bit can be
used to identify which block or blocks have caused the error. The Alternative Toggle Bit
changes from ’0’ to ’1’ to ’0’, etc. with successive Bus Read Operations from addresses
within blocks that have not erased correctly. The Alternative Toggle Bit does not change if
the addressed block has erased correctly.
Figure 14 and Figure 15 describe Alternative Toggle Bit timing waveform.
相關PDF資料
PDF描述
M29F002BB120K1 2 Mbit 256Kb x8, Boot Block Single Supply Flash Memory
M29F016D90M6F 2M X 8 FLASH 5V PROM, 90 ns, PDSO44
M29F016D70N1E 2M X 8 FLASH 5V PROM, 70 ns, PDSO40
M29F100B-150M3TR 128K X 8 FLASH 5V PROM, 150 ns, PDSO44
M29F200B-90XM3 256K X 8 FLASH 5V PROM, 90 ns, PDSO44
相關代理商/技術參數
參數描述
M29DW640F70N6T 制造商:NUMONYX 制造商全稱:Numonyx B.V 功能描述:64 Mbit (8Mb x8 or 4Mb x16, Multiple Bank, Page, Boot Block) 3V Supply Flash Memory
M29DW640F70ZE1 制造商:NUMONYX 制造商全稱:Numonyx B.V 功能描述:64 Mbit (8Mb x8 or 4Mb x16, Multiple Bank, Page, Boot Block) 3V Supply Flash Memory
M29DW640F70ZE1E 制造商:NUMONYX 制造商全稱:Numonyx B.V 功能描述:64 Mbit (8Mb x8 or 4Mb x16, Multiple Bank, Page, Boot Block) 3V Supply Flash Memory
M29DW640F70ZE1F 制造商:NUMONYX 制造商全稱:Numonyx B.V 功能描述:64 Mbit (8Mb x8 or 4Mb x16, Multiple Bank, Page, Boot Block) 3V Supply Flash Memory
M29DW640F70ZE1T 制造商:NUMONYX 制造商全稱:Numonyx B.V 功能描述:64 Mbit (8Mb x8 or 4Mb x16, Multiple Bank, Page, Boot Block) 3V Supply Flash Memory
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*