參數資料
型號: GCIXP1250-166
英文描述: Microprocessor
中文描述: 微處理器
文件頁數: 25/148頁
文件大?。?/td> 1601K
代理商: GCIXP1250-166
Intel
IXP1250 Network Processor
Datasheet
25
2.7.1
Hardware Initiated Reset
The IXP1250 provides the RESET_IN_L pin so that an external device can reset the IXP1250.
Asserting this pin resets the internal functions and generates an external reset via the
RESET_OUT_L pin.
Upon power-up, RESET_IN_L must remain asserted for 150 ms after VDD and VDDX are stable
to properly reset the IXP1250 and ensure that the PXTAL clock input and PLL Clock generator are
stable.
While RESET_IN_L is asserted, the processor is held reset. When RESET_IN_L is released, the
StrongARM* processor begins execution from SRAM address 0 after 512 PXTAL cycles. If
RESET_IN_L is asserted while the StrongARM* core is executing, the current instruction
terminated abnormally and the on-chip caches, MMU, and write buffer are disabled.
The RESET_OUT_L signal remains asserted until deasserted by the StrongARM* core. The
StrongARM* core deasserts the signal by writing bit 15 of the IXP1250_RESET register.
2.7.2
Software Initiated Reset
The StrongARM* core or an external PCI Bus master can reset specific functions in the IXP1250
by writing to the IXP1250_RESET register. In most cases, only the individual Microengines are
reset and the external RESET_OUT_L pin will be asserted via this register. The ability to reset the
other functions is provided for debugging. The SRAM Unit is always reset when the StrongARM*
Core is reset. To ensure a proper reset, the StrongARM* core and the SRAM Unit are held in reset
for 140 system clock cycles after RESET_IN_L is deasserted. The other functions that can be reset
via the IXP1250_RESET register are properly reset when consecutive writes are performed to
assert and deassert the reset.
2.7.3
PCI Initiated Reset
The IXP1250 can be reset by an external PCI Bus master when the IXP1250 is not the PCI Central
Function and arbiter device (PCI_CFG[1:0] = 00) and PCI_RST_L is an input. The entire IXP1250
is reset during a PCI Initiated Reset. When the IXP1250 is assigned as the PCI Central Function
and arbiter device (PCI_CFG[1:0] = 11), the IXP1250 drives PCI_RST_L as an output to the other
devices on the PCI Bus.
2.7.4
Watchdog Timer Initiated Reset
The IXP1250 provides a watchdog timer that can reset the StrongARM* core. The StrongARM*
core should be programmed to reset the watchdog timer periodically to ensure that the timer does
not expire. If the watchdog timer expires, it is assumed the StrongARM* core has ceased executing
instructions properly. The reset generated by the Watchdog Timer will reset each of the functions in
the IXP1250.
相關PDF資料
PDF描述
GCIXP1250-200 Microprocessor
GCIXP1250-232 Microprocessor
GCK101 Analog IC
GCK131 Microcontroller
GCM-3.15A Fuse
相關代理商/技術參數
參數描述
GCIXP1250BA 功能描述:IC MPU NETWORK 166MHZ 520-BGA RoHS:否 類別:集成電路 (IC) >> 嵌入式 - 微處理器 系列:- 標準包裝:40 系列:MPC83xx 處理器類型:32-位 MPC83xx PowerQUICC II Pro 特點:- 速度:267MHz 電壓:0.95 V ~ 1.05 V 安裝類型:表面貼裝 封裝/外殼:516-BBGA 裸露焊盤 供應商設備封裝:516-PBGAPGE(27x27) 包裝:托盤
GCIXP1250BB 功能描述:IC MPU NETWORK 200MHZ 520-BGA RoHS:否 類別:集成電路 (IC) >> 嵌入式 - 微處理器 系列:- 標準包裝:40 系列:MPC83xx 處理器類型:32-位 MPC83xx PowerQUICC II Pro 特點:- 速度:267MHz 電壓:0.95 V ~ 1.05 V 安裝類型:表面貼裝 封裝/外殼:516-BBGA 裸露焊盤 供應商設備封裝:516-PBGAPGE(27x27) 包裝:托盤
GCIXP1250BC 功能描述:IC MPU NETWORK 232MHZ 520-BGA RoHS:否 類別:集成電路 (IC) >> 嵌入式 - 微處理器 系列:- 標準包裝:40 系列:MPC83xx 處理器類型:32-位 MPC83xx PowerQUICC II Pro 特點:- 速度:267MHz 電壓:0.95 V ~ 1.05 V 安裝類型:表面貼裝 封裝/外殼:516-BBGA 裸露焊盤 供應商設備封裝:516-PBGAPGE(27x27) 包裝:托盤
GCJ0335C5C0JR50D 制造商:MURATA 制造商全稱:Murata Manufacturing Co., Ltd. 功能描述:Chip Monolithic Ceramic Capacitors
GCJ0335C5C1AR50D 制造商:MURATA 制造商全稱:Murata Manufacturing Co., Ltd. 功能描述:Chip Monolithic Ceramic Capacitors