參數資料
型號： AT43USB351M-AC
廠商： ATMEL CORP
元件分類： 微控制器/微處理器
英文描述： Full-speed/Low-speed USB Microcontroller with ADC and PWM
中文描述： 8-BIT, MROM, 24 MHz, RISC MICROCONTROLLER, PQFP48
封裝： 7 X 7 MM, 1.40 MM HEIGHT, 0.50 MM PITCH, PLASTIC, MS-026BBC, LQFP-48
文件頁數： 63/101頁
文件大?。?/td> 624K
代理商： AT43USB351M-AC
63
AT43USB351M
3302E–USB–7/04
ADC Control and Status Register – ADCSR
Bit 7
–
ADEN: ADC Enable
Writing a logical "1" to this bit enables the ADC. By clearing this bit to zero, the ADC is turned
off. Turning the ADC off while a conversion is in progress will terminate this conversion.
Bit 6
–
ADSC: ADC Start Conversion
In Single Conversion Mode, a logical "1" must be written to this bit to start each conversion. In
Free Running Mode, a logical "1" must be written to this bit to start the first conversion. The
first time ADSC has been written after the ADC has been enabled or if ADSC is written at the
same time as the ADC is enabled, an extended conversion will precede the initiated conver-
sion. This extended conversion performs initialization of the ADC.
ADSC will read as one as long as a conversion is in progress. When the conversion is com-
plete, it returns to zero. When a extended conversion precedes a real conversion, ADSC will
stay high until the real conversion completes. Writing a "0" to this bit has no effect.
Bit 5
–
ADFR: ADC Free Running Select
When this bit is set (one), the ADC operates in Free Running Mode. In this mode, the ADC
samples and updates the data registers continuously. Clearing this bit (zero) will terminate
Free Running Mode.
Bit 4
–
ADIF: ADC Interrupt Flag
This bit is set (one) when an ADC conversion completes and the data registers are updated.
The ADC Conversion Complete interrupt is executed if the ADIE bit and the I-bit in SREG are
set (one). ADIF is cleared by the hardware when executing the corresponding interrupt han-
dling vector. Alternatively, ADIF is cleared by writing a logical "1" to the flag. Beware that if
doing a read-modify-write on ADCSR, a pending interrupt can be disabled. This also applies if
the SBI and CBI instructions are used.
Bit 3
–
ADIE: ADC Interrupt Enable
When this bit is set (one) and the I-bit in SREG is set (one), the ADC Conversion Complete
interrupt is activated.
Bits 2..0
–
ADPS2..ADPS0: ADC Prescaler Select Bits
These bits determine the division factor between the 12 MHz system clock frequency and the
input clock to the ADC.
Bit
7
6
5
4
3
2
1
0
$07 ($27)
ADEN
ADSC
ADFR
ADIF
ADIE
ADPS2
ADPS1
ADPS0
ADCSR
Read/Write
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Initial Value
0
0
0
0
0
0
0
0
相關PDF資料
PDF描述
AT43USB353M-AC Low Cost Full-speed USB Microcontroller with Embedded Hub, ADC and PWM
AT43USB355E-AC Full-speed USB Microcontroller with Embedded Hub, ADC and PWM
AT43USB355E-AU Full-speed USB Microcontroller with Embedded Hub, ADC and PWM
AT43USB355M-AC Full-speed USB Microcontroller with Embedded Hub, ADC and PWM
AT43USB355M-AU Full-speed USB Microcontroller with Embedded Hub, ADC and PWM
相關代理商/技術參數
參數描述
AT43USB353M 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:Missed Watchdog Timer Reset
AT43USB353M_03 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:Low Cost USB Microcontroller with Hub, ADC and PWM
AT43USB353M_04 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:Low Cost Full-speed USB Microcontroller with Embedded Hub, ADC and PWM
AT43USB353M-AC 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:Low Cost Full-speed USB Microcontroller with Embedded Hub, ADC and PWM
AT43USB355 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:Missed Watchdog Timer Reset
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*