參數資料
型號: AT43USB351M-AC
廠商: ATMEL CORP
元件分類: 微控制器/微處理器
英文描述: Full-speed/Low-speed USB Microcontroller with ADC and PWM
中文描述: 8-BIT, MROM, 24 MHz, RISC MICROCONTROLLER, PQFP48
封裝: 7 X 7 MM, 1.40 MM HEIGHT, 0.50 MM PITCH, PLASTIC, MS-026BBC, LQFP-48
文件頁數: 28/101頁
文件大小: 624K
代理商: AT43USB351M-AC
28
AT43USB351M
3302E–USB–7/04
External Interrupts
The external interrupts are triggered by the INT0/INT1 pins. Observe that, if enabled, the
INT0/INT1 interrupts will trigger even if the INT0/INT1 pins are configured as outputs. This fea-
ture provides a way of generating a software interrupt. The external interrupts can be triggered
by a falling or rising edge or a low level. This is set up as indicated in the specification for the
MCU Control Register (MCUCR) and the Interrupt Sense Control Register (ISCR). When
INT0/INT1 is enabled and is configured as level triggered, the interrupt will trigger as long as
the pin is held low. INT0/INT1 is set up as described in the specification for the MCU Control
Register (MCUCR).
Interrupt
Response Time
The interrupt execution response for all the enabled AVR interrupts is 4 clock cycles minimum.
4 clock cycles after the interrupt flag has been set, the program vector address for the actual
interrupt handling routine is executed. During this 4 clock cycle period, the Program Counter (2
bytes) is pushed onto the Stack, and the Stack Pointer is decremented by 2. The vector is nor-
mally a jump to the interrupt routine, and this jump takes 3 clock cycles. If an interrupt occurs
during execution of a multi-cycle instruction, this instruction is completed before the interrupt is
served.
A return from an interrupt handling routine (same as for a subroutine call routine) takes 4 clock
cycles. During these 4 clock cycles, the Program Counter (2 bytes) is popped back from the
Stack, the Stack Pointer is incremented by 2, and the I flag in SREG is set. When the AVR
exits from an interrupt, it will always return to the main program and execute one more instruc-
tion before any pending interrupt is served.
相關PDF資料
PDF描述
AT43USB353M-AC Low Cost Full-speed USB Microcontroller with Embedded Hub, ADC and PWM
AT43USB355E-AC Full-speed USB Microcontroller with Embedded Hub, ADC and PWM
AT43USB355E-AU Full-speed USB Microcontroller with Embedded Hub, ADC and PWM
AT43USB355M-AC Full-speed USB Microcontroller with Embedded Hub, ADC and PWM
AT43USB355M-AU Full-speed USB Microcontroller with Embedded Hub, ADC and PWM
相關代理商/技術參數
參數描述
AT43USB353M 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:Missed Watchdog Timer Reset
AT43USB353M_03 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:Low Cost USB Microcontroller with Hub, ADC and PWM
AT43USB353M_04 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:Low Cost Full-speed USB Microcontroller with Embedded Hub, ADC and PWM
AT43USB353M-AC 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:Low Cost Full-speed USB Microcontroller with Embedded Hub, ADC and PWM
AT43USB355 制造商:ATMEL 制造商全稱:ATMEL Corporation 功能描述:Missed Watchdog Timer Reset