參數資料
型號: ARM60
廠商: Mitel Networks Corporation
英文描述: Low Power General Purpose 32-Bit RISC Microprocessor(低功耗通用32位精簡指令集微處理器)
中文描述: 低功耗通用32位RISC微處理器(低功耗通用32位精簡指令集微處理器)
文件頁數: 99/121頁
文件大?。?/td> 1217K
代理商: ARM60
Boundary Scan Test Interface
95
There is no parallel output from the bypass register.
A logic 0 is loaded from the parallel input of the bypass register in the CAPTURE-DR state.
8.6.2 ARM60 Device IdentiTcation (ID) Code Register
Purpose: This register is used to read the 32-bit device identification code. No programmable
supplementary identification code is provided.
Length: 32 bits
The format of the ID register is as follows:
Please contact your supplier for the correct Device Identification Code.
Operating Mode: When the IDCODE instruction is current, the ID register is selected as the serial path
between
TDI
and
TDO
.
There is no parallel output from the ID register.
The 32-bit device identification code is loaded into the ID register from its parallel inputs during the
CAPTURE-DR state.
8.6.3 ARM60 Boundary Scan (BS) Register
Purpose: The BS register consists of a serially connected set of cells around the periphery of the device, at
the interface between the core logic and the system input/output pads. This register can be used to isolate
the core logic from the pins and then apply tests to the core logic, or conversely to isolate the pins from the
core logic and then drive or monitor the system pins.
Operating modes: The BS register is selected as the register to be connected between
during the SAMPLE/PRELOAD, EXTEST and INTEST instructions. Values in the BS register are used, but
are not changed, during the CLAMP and CLAMPZ instructions.
TDI
and
TDO
only
In the normal (system) mode of operation, straight-through connections between the core logic and pins are
maintained and normal system operation is unaffected.
In TEST mode (i.e. when either EXTEST or INTEST is the currently selected instruction), values can be
applied to the core logic or output pins independently of the actual values on the input pins and core logic
outputs respectively. On the ARM60 all of the boundary scan cells include an update register and thus all
of the pins can be controlled in the above manner. Additional boundary-scan cells are interposed in the scan
chain in order to control the enabling of tristateable buses.
0
1
11
12
27
28
31
1
Manufacturer Identity
Part Number
Version
相關PDF資料
PDF描述
ARM610 General Purpose 32-Bit Microprocessor with 4kByte Cache,Write Buffer and Memory Management Unit(通用32位微處理器(帶4K字節緩存,寫緩沖器和存儲器管理單元))
ARRAYS NIGHT VISION H.V. RECTIFIER DIODES & ARRAYS
ARS2540 40A GLASS PASSIVATED AVALANCHE BUTTON DIODE
AR2540 40A GLASS PASSIVATED AVALANCHE BUTTON DIODE
ARS25A 25A AUTOMOTIVE BUTTON DIODE
相關代理商/技術參數
參數描述
ARM607 制造商:Master Appliance Corp 功能描述:Armature, With Retaining Rings, 120V (HG 制造商:Master Appliance Corp 功能描述:Armature, With Retaining Rings, 120V (HG-751B)
ARM-607 制造商:Master Appliance Corp 功能描述:Nozzle Shield; HG-751B heat gun 制造商:Master Appliance 功能描述:Heat Gun,Armature W/Retaining Ring For Hg-751B 120V, Hg-501A-D
ARM610 制造商:ZARLINK 制造商全稱:Zarlink Semiconductor Inc 功能描述:General purpose 32-bit microprocessor
ARM7-009 制造商:Gravitech 功能描述:ARM7 LPC2378 W/2.8" TCH SCRN LCD BLU
ARM720T 制造商:未知廠家 制造商全稱:未知廠家 功能描述:General-purpose 32-bit Microprocessor with 8KB cache, enlarged Write buffer, and Memory Management Unit (MMU) combined in a single chip